Biofuel Systems Group Ltd - Online Shop Feed

450W insulated drum heater -

Tue, 1 Dec 2009 12:51:14 +0000

450W insulated drum heater. For maintaining temperaure of 205 / 210 litre barrels (45 Imp Gal / 55 US Gal) High quality insulation and direct contact with the drum ensures much higher efficiency than normal band heaters. 1800-1950mm circumference, 440mm height. 240V with integral 0-90�C capillary thermostat. 5m supply cable (PVC insulated, sheathed, galvanised steel braided wire) GBP 349.00 January 30, 2010 ]]>

1300W insulated IBC jacket heater -

Tue, 1 Dec 2009 12:51:14 +0000

1300W insulated IBC jacket heater. For warming 1000 litre IBCS (200 ImpGal / 260 USGal) 4060-4310mm diameter, 950mm height. 240V with -5-40�C thermostat as standard. 5m supply cable GBP 869.00 January 30, 2010 ]]>

2200W (2 x 1100W) Double IBC jacket heater -

Tue, 1 Dec 2009 12:51:14 +0000

2200W - 2 x 1100W IBC jacket heaterTwo heating circuits allows top and bottom halves of jackets to be separately controlledOptional insulated lid4060-4310mm circumference, 950mm height240V with 0-90�C thermostats supplied as standardTwo 5m supply cables GBP 1349.00 January 30, 2010 ]]>

Thermosafe - ATEX certified drum heater -

Tue, 1 Dec 2009 12:51:14 +0000

Thermosafe - ATEX certified induction heater for 205 litre (45 ImpGal / 55 USGal) or smaller steel drums. [E x II 2 GD E ex e II T3(170�C)]Highly efficient energy transfer by alternating magnetic field - there is no heat transfer by the conventional and inefficient means of radiation or convection. Physical contact is not required, and as there are no hot elements, the heater remains substantially cooler than the drum being heated. SAFETY: The complete absence of hot elements and the encapsulation of all electrical components enables unattended use, overnight if required. Thermosafe can even be used in hazardous areas Zones 1 and 2, as the heater is unique in possessing full BASEEFA/ATEX certification. Uniform heating without hot spots reduces the risk of product degradation. Accidental spillage does not present a fire hazard and personnel can work comfortably in close proximity. Together, these features allow material to be heated at point of use, thus eliminating the transport of hot drums. EFFICIENCY: The low system temperature and lack of unwanted heat transfer contribute to the high efficiency of the induction heater. Power usage is extremely low at only 2.25kW. The heaters have won several awards for efficiency and productivity. Independent figures indicate energy savings of over 50% when compared with conventional radiant drum heaters, and more than 90% in comparison with drum ovens. SPEED: By using the entire drum wall to input energy, the fastest practical heating rate can be achieved without product degradation. Heating times will depend on the contents of the drum, but to give a rough idea, the rate of temperature rise of a typical viscous organic liquid will be about 15 �C per hour. The speed is further improved by the instant initial response of induction heating. Typically, Thermosafe has proved to be 2 to 4 times faster than ovens.CLEANLINESS: With ingress protection to IP66, smooth surfaces and no moving parts, the induction heaters are ideal for use in clean environments. They can even be hosed down during use. Available options: Rigid Top Hat (hazardous area use) and Flexible Top Hat (safe-area use) - cover the exposed section of 205 litre drums. Minimises heat loss and increases efficiency Faratherm (TM) ATEX & IECEx certified base heater - Provides additional heat to base of drum. 500W induction heater Certified Lifting Frame - mobile frame permits a single person to lift and lower the Thermosafe heater. Meets ATEX mechanical equipment regulations Temperature controller - Not always required, but can provide additional control. Allows particular temperature to be maintained or set maximum temperature limit Click here for further information about available options Click here for more information about Faratherm (TM) Click here for more information about the Thermosafe (TM) Lifting Frame GBP 2995.00 January 30, 2010 ]]>

Biodiesel transfer pump (370W/230V/Max flow ~60 litres/min) -

Tue, 1 Dec 2009 12:51:14 +0000

Suitable for transfer of biodiesel upto 60 litres / min370W self priming rotary vane pump1" BSP ports230V single phase AC induction motor with aluminum casingIntegral bypass valve & 100 micron filterIP55 (weatherproof) protection Optional IBC coupling kit: IBC adapter, 2m hose, swivel & 1" hosetail Optional delivery hose & nozzle: Aluminium delivery nozzle with Viton seals, 3m hose & 1" hose-tail GBP 129.00 January 30, 2010 ]]>

Size 2 316 stainless steel industrial filtration system -

Tue, 1 Dec 2009 12:51:14 +0000

Size 2 Industrial bag filtration system316L stainless steel housing with protective poly coat finishBand clamp closure Viton gasket & sealFlow rates upto 680 litres / minute (180 US GPM)Rated for temperatures upto 120�C and pressures upto 10 Bar (150psi) 2" NPT inlet / output ports as standard. Supplied with either 1 micron polypropylene felt (max 95�C) or 100 micron washable nylon mesh filter bag GBP 1395.00 January 30, 2010 ]]>

Size 2 polypropylene filter bag -

Tue, 1 Dec 2009 12:51:14 +0000

Polypropylene felt filter bag for size 2 housing GBP 5.50 January 30, 2010 ]]>

Size 2 nylon mesh washable filter bag -

Tue, 1 Dec 2009 12:51:14 +0000

Washable nylon mesh filter bag for size 2 housing GBP 7.75 January 30, 2010 ]]>

Barrel emptying pump kit - general purpose - * Modified *

Tue, 1 Dec 2009 12:51:14 +0000

For pumping from 205 litre barrels / drums. Suitable for transfer of Biodiesel, fuel oils, new & used cooking oil and glycerol. Delivery rate max: 150 l/min, delivery head upto 7.5 m (dependent upon liquid being transferred) Viscosity upto 800 mPas (cP), temperatures upto 50�C. Polypropylene (PP) barrel pump with ceramic oxide mechanical seal, PTFE/carbon. O-rings in FPM, shaft in Hastelloy C, impellor in ETFE, outer-� 40 mm, BSP 1 1/4" outlet connected to DN19 chemical delivery hose with PP/FPM quick action tap. 1000mm immersed length. Polypropylene compression gland. 450W (230V/50 Hz/IP 24) commutator motor with 5 m power supply cable and plug. GBP 639.00 January 30, 2010 ]]>

IBC emptying pump kit - general purpose - * Modified *

Tue, 1 Dec 2009 12:51:14 +0000

For pumping from standard 1000 litre IBCs. Suitable for transfer of Biodiesel, fuel oils, new & used cooking oil and glycerol Delivery rate max: 150 l/min, delivery head upto 7.5 m (dependent upon liquid being transferred) Viscosity upto 800 mPas (cP), temperatures upto 50�C Polypropylene (PP) barrel pump with ceramic oxide mechanical seal, PTFE/carbon. O-rings in FPM, shaft in Hastelloy C, impellor in ETFE, outer-� 40 mm, BSP 1 1/4" outlet connected to DN19 chemical delivery hose with PP/FPM quick action tap. 1200mm immersed length. Polypropylene compression gland. 450W (230V/50 Hz/IP 24) commutator motor with 5 m power supply cable and plug. GBP 695.00 January 30, 2010 ]]>

ATEX certified barrel pump kit - universal & high flammability -

Tue, 1 Dec 2009 12:51:14 +0000

For transfer of a very wide variety of liquids in hazardous areas or pumping highly flammable liquids from 205 litre barrels / drums. Suitable for transfer of Methanol, ethanol, alchohol/hydroxide mixtures, biodiesel, fuel oils, new or used cooking oil, glycerol, acetic acid, tetrahydrafuran (THF), alkyl alcohols. Delivery rate max: 200 l/min, delivery head upto 9.5 m (dependent upon liquid being transferred) Viscosity upto 800 mPas (cP), temperatures upto 120�C. Stainless steel (316Ti) barrel pump, sealless shaft, ETFE impellor, outer-� 41/43 mm, BSP 1 1/4" male to DN19 conductive chemical delivery hose with stainless steel/PTFE/FEP quick action tap. 1000mm immersed length. Polypropylene compression gland. 460W (230V/50 Hz) commutator motor explosion proof to II 2 G EEx de IIC T6. Supplied with 5 m power supply cable and safety plug. GBP 1495.00 January 30, 2010 ]]>

ATEX certified IBC pump kit - universal & high flammability -

Tue, 1 Dec 2009 12:51:14 +0000

For transfer of liquids in hazardous area / pumping highly flammable liquids from standard 1000 litre IBCsSuitable for transfer of Methanol, ethanol, alchohol/hydroxide mixtures, biodiesel, fuel oils, new or used cooking oil, glycerol, acetic acid, tetrahydrafuran (THF), alkyl alcoholsDelivery rate max: 200 l/min, delivery head upto 9.5 m (dependent upon liquid being transferred) Viscosity upto 800 mPas (cP), temperatures upto 120�CStainless steel (316Ti) barrel pump, sealless shaft, ETFE impellor, outer-� 41/43 mm, BSP 1 1/4" male to DN19 conductive chemical delivery hose with stainless steel/PTFE/FEP quick action tap. 1200mm immersed length. Polypropylene compression gland. 460W (230V/50 Hz) commutator motor explosion proof to II 2 G EEx de IIC T6. Supplied with 5 m power supply cable and safety plug. GBP 1595.00 January 30, 2010 ]]>

Barrel pump kit for concentrated acids / alkalis -

Tue, 1 Dec 2009 12:51:14 +0000

For pumping from 205 litre barrels / drums Suitable for transfer of highly concentrated acids including 98% sulphuric acid and strong sodium hydroxide solutions, as well as biodiesel, fuel oils, new / used cooking oil and glycerolDelivery rate max: 170 l/min, delivery head upto 9.5 m (dependent upon liquid being transferred) Viscosity upto 800 mPas (cP), temperatures upto 100�CPVDF barrel pump with ceramic oxide mechanical seal, PTFE/carbon. O-rings in FPM, shaft in Hastelloy C, impellor in ETFE, outer-� 40 mm, BSP 1 1/4" outlet connected to DN19 chemical delivery hose with PVDF/FPM quick action tap. 1000mm immersed length. Polypropylene compression gland. 460W (230V/50 Hz/IP 55) corrosion resistant commutator motor with 5 m power supply cable and safety plug. GBP 995.00 January 30, 2010 ]]>

IBC pump kit for concentrated acids / alkalis -

Tue, 1 Dec 2009 12:51:14 +0000

For pumping from standard 1000 litre IBCsSuitable for transfer of highly concentrated acids including 98% sulphuric acid and strong sodium hydroxide solutions, as well as biodiesel, fuel oils, new / used cooking oil and glycerolDelivery rate max: 170 l/min, delivery head upto 9.5 m (dependent upon liquid being transferred) Viscosity upto 800 mPas (cP), temperatures upto 100�CPVDF barrel pump with ceramic oxide mechanical seal, PTFE/carbon. O-rings in FPM, shaft in Hastelloy C, impellor in ETFE, outer-� 40 mm, BSP 1 1/4" outlet connected to DN19 chemical delivery hose with PVDF/FPM quick action tap. 1200mm immersed length. Polypropylene compression gland. 460W (230V/50 Hz/IP 55) corrosion resistant commutator motor with 5 m power supply cable and safety plug. GBP 1095.00 January 30, 2010 ]]>

RFM10 -

Tue, 1 Dec 2009 12:51:14 +0000

RFM10 - Massive construction industrial air operated diaphragm pump Designed for maintenance free continuous use Polypropylene housing with PTFE diaphragms and FFKM seal 3/8" BSP female inlet/outlet port size Max delivery rate 30 l/min Max air consumption 16m3/hr (9.4cfm) Max operating pressure 7 bar Dry suction head upto 2-3m, liquid filled suction upto 8m, delivery head upto 69m Air inlet/outlet BSP 1/8" female Temperatures upto 80�C Broad chemical compatibility including biodiesel,alcohols, methanol/hydroxide mixtures,glycerol,fuel oils,many acid/alkali solutions and new/used vegetable oilsCapable of pumping suspended solids upto 4mm size * Reko-Flux pumps must NOT be used with a lubricated air supply. GBP 795.00 January 30, 2010 ]]>

RFML10 - ATEX certified flameproof pump -

Tue, 1 Dec 2009 12:51:14 +0000

RFML10 - ATEX certified massive construction flameproof industrial air operated diaphragm pump ATEX certified: Ex II 2 G cp II B X Designed for maintenance free continuous use Conductive polypropylene housing with PTFE diaphragms and FFKM seal 3/8" BSP female inlet/outlet port size Max delivery rate 30 l/min Max air consumption 16m3/hr (9.4cfm) Max operating pressure 7 bar Dry suction head upto 2-3m, liquid filled suction upto 8m, delivery head upto 69m Air inlet/outlet BSP 1/8" female Temperatures upto 80�C Broad chemical compatibility including biodiesel,alcohols, methanol/hydroxide mixtures,glycerol,fuel oils,many acid/alkali solutions and new/used vegetable oils Capable of pumping suspended solids upto 4mm size * Reko-Flux pumps must NOT be used with a lubricated air supply. GBP 995.00 January 30, 2010 ]]>

RFM15 -

Tue, 1 Dec 2009 12:51:14 +0000

RFM15 - Massive construction industrial air operated diaphragm pump Designed for maintenance free continuous use Polypropylene housing with PTFE diaphragms and FFKM seal 1/2" BSP female inlet/outlet port size Max delivery rate 55 l/min Max air consumption 28m3/hr (16.4cfm) Max operating pressure 7 bar Dry suction head upto 3m, liquid filled suction upto 8m, delivery head upto 70m Air inlet/outlet BSP 1/4" female Temperatures upto 80�C Broad chemical compatibility including biodiesel,alcohols, methanol/hydroxide mixtures,glycerol,fuel oils,many acid/alkali solutions and new/used vegetable oils Capable of pumping suspended solids upto 4mm size * Reko-Flux pumps must NOT be used with a lubricated air supply. GBP 949.00 January 30, 2010 ]]>

RFML15 - ATEX certified flameproof pump -

Tue, 1 Dec 2009 12:51:14 +0000

RFML15 - ATEX certified massive construction flameproof industrial air operated diaphragm pump ATEX certified: Ex II 2 G cp II B X Designed for maintenance free continuous use Conductive polypropylene housing with PTFE diaphragms and FFKM seal 1/2" BSP female inlet/outlet port size Max delivery rate 55 l/min Max air consumption 28m3/hr (16.5cfm) Max operating pressure 7 bar Dry suction head upto 3m, liquid filled suction upto 8m, delivery head upto 70m Air inlet/outlet BSP 1/4" female Temperatures upto 80�C Broad chemical compatibility including biodiesel,alcohols, methanol/hydroxide mixtures,glycerol,fuel oils,many acid/alkali solutions and new/used vegetable oils Capable of pumping suspended solids upto 4mm size * Reko-Flux pumps must NOT be used with a lubricated air supply. GBP 1295.00 January 30, 2010 ]]>

RFM25 -

Tue, 1 Dec 2009 12:51:14 +0000

RFM25 - Massive construction industrial air operated diaphragm pump Designed for maintenance free continuous use Polypropylene housing with PTFE diaphragms and FFKM seal 1" BSP female inlet/outlet port size Max delivery rate 110 l/min Max air consumption 56m3/hr (33cfm) Max operating pressure 7 bar Dry suction head upto 3m, liquid filled suction upto 8m, delivery head upto 69.5m Air inlet/outlet BSP 1/4" female Temperatures upto 80�C Broad chemical compatibility including biodiesel,alcohols, methanol/hydroxide mixtures,glycerol,fuel oils,many acid/alkali solutions and new/used vegetable oils Capable of pumping suspended solids upto 6mm size * Reko-Flux pumps must NOT be used with a lubricated air supply. GBP 1295.00 January 30, 2010 ]]>

RFML25 - ATEX certified flameproof pump -

Tue, 1 Dec 2009 12:51:14 +0000

RFML25 - ATEX certified massive construction flameproof industrial air operated diaphragm pump ATEX certified Ex II 2 G cp II B X Designed for maintenance free continuous use Conductive polypropylene housing with PTFE diaphragms and FFKM seal 1" BSP female inlet/outlet port size Max delivery rate 110 l/min Max air consumption 56m3/hr (33cfm) Max operating pressure 7 bar Dry suction head upto 3m, liquid filled suction upto 8m, delivery head upto 69.5m Air inlet/outlet BSP 1/4" female Temperatures upto 80�C Broad chemical compatibility including biodiesel,alcohols, methanol/hydroxide mixtures,glycerol,fuel oils,many acid/alkali solutions and new/used vegetable oils Capable of pumping suspended solids upto 6mm size * Reko-Flux pumps must NOT be used with a lubricated air supply. GBP 1995.00 January 30, 2010 ]]>

RFM40 -

Tue, 1 Dec 2009 12:51:14 +0000

RFM40 - Massive construction industrial air operated diaphragm pump Designed for maintenance free continuous use Polypropylene housing with PTFE diaphragms and FFKM seal 1.5" BSP female inlet/outlet port size Max delivery rate 235 l/min Max air consumption 95m3/hr (56cfm) Max operating pressure 8 bar Dry suction head upto 4.5m, liquid filled suction upto 8m, delivery head upto 71m Air inlet/outlet BSP 1/2" female Temperatures upto 80�C Broad chemical compatibility including biodiesel,alcohols, methanol/hydroxide mixtures,glycerol,fuel oils,many acid/alkali solutions and new/used vegetable oils Capable of pumping suspended solids upto 6mm size * Reko-Flux pumps must NOT be used with a lubricated air supply. GBP 2395.00 January 30, 2010 ]]>

RFM50 -

Tue, 1 Dec 2009 12:51:14 +0000

RFM50 - Massive construction industrial air operated diaphragm pump Designed for maintenance free continuous use Polypropylene housing with PTFE diaphragms 2" BSP female inlet/outlet port size Max delivery rate 385 l/min Max air consumption 164m3/hr (96cfm) Max operating pressure 8 bar Dry suction head upto 6m, liquid filled suction upto 8m, delivery head upto 71m Air inlet/outlet BSP 1/2" female Temperatures upto 80�C Broad chemical compatibility including biodiesel,alcohols, methanol/hydroxide mixtures,glycerol,fuel oils,many acid/alkali solutions and new/used vegetable oils Capable of pumping suspended solids upto 6mm size * Reko-Flux pumps must NOT be used with a lubricated air supply. GBP 2995.00 January 30, 2010 ]]>

Wintron XC30 - 200 litres [UK duty paid] -

Tue, 1 Dec 2009 12:51:14 +0000

Cold flow additive / pour point depressant (PPD) specifically for biodieselSuitable for most types of biodiesel (B100) and biodiesel blends (B5, B20 etc.)Treat rate is typically 0.2% - 1.5% by volume, although this varies and is dependent on the type of biodiesel. 200 litres / 185Kg Net Please e-mail:wintron@biofuelsystems.com for further information GBP 919.00 January 30, 2010 ]]>

0.18kW 'EEx e' 3-phase motor [2 & 4-pole] -

Tue, 1 Dec 2009 12:51:14 +0000

0.18kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size 63M Versions available: 2-pole 4-pole Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 173.00 January 30, 2010 ]]>

PBH-410 Polypropylene filter bag -

Tue, 1 Dec 2009 12:51:14 +0000

Polypropylene felt filter bag for PBH-410 housing. *1 micron bag recommended for biodiesel filtration GBP 4.00 January 30, 2010 ]]>

PBH-410 Nylon mesh washable bag -

Tue, 1 Dec 2009 12:51:14 +0000

Washable nylon mesh filter bag for PBH-410 housing *100 micron bag recommended for used cooking oil filtration GBP 5.00 January 30, 2010 ]]>

PBH-420 polypropylene filter bag -

Tue, 1 Dec 2009 12:51:14 +0000

Polypropylene felt filter bag for PBH-420 housing *1 micron bag recommended for biodiesel filtration GBP 5.25 January 30, 2010 ]]>

PBH-420 Nylon mesh washable bag -

Tue, 1 Dec 2009 12:51:14 +0000

Washable nylon mesh filter bag for PBH-420 housing *100 micron bag recommended for used cooking oil filtration GBP 6.00 January 30, 2010 ]]>

Biodiesel transfer pump (750W/230V/Max flow ~100 litres/min) -

Tue, 1 Dec 2009 12:51:14 +0000

High flow biodiesel transfer pump Flow rate upto 100 litres / minute Self-priming, rotary vane pump with 750W/230V AC motor 1" female BSP ports with flanged connectors Technical features: Cast iron pump body with anti-corrosion treatment and paint Vane pump with sintered steel rotor and acetal resin vanes Incorporated by-pass valve Induction motor with aluminum casing and anchoring brackets Ingress protection grade - IP55 (weather proof) Suitable for continuous service with thermal motor overload protection External filter Available options IBC coupling kit: IBC adapter, 2m hose, swivel & 1" hosetail Delivery hose & nozzle: Aluminium delivery nozzle with Viton seals, 3m hose & 1" hose-tail GBP 239.00 January 30, 2010 ]]>

6kW ATEX certified flameproof immersion heater -

Tue, 1 Dec 2009 12:51:14 +0000

6kW Flameproof immersion heaterATEX Certified Ex II 2 G EEx d IIC T4 Zone 1Low watts density 321 Stainless Steel sheathed embedded rod type elements (2.79 W/cm2 = 18W/inch2)686mm immersed length with 50mm inactiveLightweight cast aluminium power coated enclosure, weatherproof to IP672�" BSP 316L stainless steel boss fixing with Viton seal1 x M25 and 1 x M20 cable entryAuto-reset thermostat range +5/80�CManual-reset limit thermostat set at 95�CTest Pressure 24 Bar g GBP 429.00 January 30, 2010 ]]>

1" PVDF digital flow meter -

Tue, 1 Dec 2009 12:51:14 +0000

Digitally displays flow rate / cumulative totalTurbine type, for flow range 18.9 - 190 l/min (5-50GPM) Designed for use with 1" i.d. pipework, can be supplied with either NPT or ISO fittingsAccuracy +/- 1.5%PVDF (Kynar) housing & rotor, ceramic journal bearings & shaft, Viton ringsPressure rating 10.2bar (150 PSIG) Max flow 284 l/min (75GPM)Operating temperature range -10 to 60�CMax pressure drop in 10:1 range 0.4bar (6 PSIG)Features:2 totals - 1 resettable / 1 cumulativeFactory calibrated in gallons or litres2 user calibrations and flowrateNon-sparking - ATEX Zone 1 / FM Approved as intrinsically safe in Class I, Div I, all groupsCompatible with chemicals encountered in biodiesel production (biodiesel, methanol, ethanol, propanol, sodium hydroxide upto 20%, potassium hydroxide, glycerol, sulphuric acid, phosphoric acid, hydrochloric acid, tetrahydrofuran etc.) as well as diesel, kerosene, petroleum GBP 495.00 January 30, 2010 ]]>

1" stainless steel digital flow meter -

Tue, 1 Dec 2009 12:51:14 +0000

Digitally displays flow rate / cumulative totalTurbine type, for flow range 18.9 - 190 l/min (5-50GPM)Designed for use with 1" i.d. pipework, can be supplied with either NPT or ISO fittingsAccuracy +/- 1.5%316 s/s housing, PVDF rotor, ceramic journal bearings & tungsten carbide shaft, 316 s/s ringsPressure rating 103bar (1500 PSIG)Max flow 284 l/min (75GPM)Operating temperature range -10 to 60�CMax pressure drop in 10:1 range 0.68bar (10 PSIG)Features:2 totals - 1 resettable / 1 cumulativeFactory calibrated in gallons or litres2 user calibrations and flowrateNon-sparking - ATEX Zone 1 / FM Approved as intrinsically safe in Class I, Div I, all groupsCompatible with several chemicals encountered in biodiesel production (biodiesel, methanol, ethanol, propanol, glycerol) as well as diesel, kerosene, petroleum GBP 465.00 January 30, 2010 ]]>

1.5" stainless steel digital flow meter -

Tue, 1 Dec 2009 12:51:14 +0000

Digitally displays flow rate / cumulative totalTurbine type, for flow range 38 - 380 l/min (10-100GPM)Designed for use with 1.5" i.d. pipework, can be supplied with either NPT or ISO fittingsAccuracy +/- 1%316 s/s housing, PVDF rotor, ceramic journal bearings & tungsten carbide shaft, 316 s/s ringsPressure rating 103bar (1500 PSIG)Max flow 568 l/min (150GPM)Operating temperature range -10 to 60�CMax pressure drop in 10:1 range 0.28bar (4 PSIG)Features:2 totals - 1 resettable / 1 cumulativeFactory calibrated in gallons or litres2 user calibrations and flowrateNon-sparking - ATEX Zone 1 / FM Approved as intrinsically safe in Class I, Div I, all groupsCompatible with several chemicals encountered in biodiesel production (biodiesel, methanol, ethanol, propanol, glycerol) as well as diesel, kerosene, petroleum GBP 620.00 January 30, 2010 ]]>

2" stainless steel digital flow meter -

Tue, 1 Dec 2009 12:51:14 +0000

Digitally displays flow rate / cumulative totalTurbine type, for flow range 76 - 760 l/min (20-200GPM)Designed for use with 2" i.d. pipework, can be supplied with either NPT or ISO fittingsAccuracy +/- 1% 316 s/s housing, PVDF rotor, ceramic journal bearings & tungsten carbide shaft, 316 s/s ringsPressure rating 103bar (1500 PSIG)Max flow 1136 l/min (300GPM)Operating temperature range -10 to 60�CMax pressure drop in 10:1 range 0.28bar (4 PSIG)Features:2 totals - 1 resettable / 1 cumulativeFactory calibrated in gallons or litres2 user calibrations and flowrateNon-sparking - ATEX Zone 1 / FM Approved as intrinsically safe in Class I, Div I, all groupsCompatible with several chemicals encountered in biodiesel production (biodiesel, methanol, ethanol, propanol, glycerol) as well as diesel, kerosene, petroleum GBP 815.00 January 30, 2010 ]]>

1250W High power drum heater -

Tue, 1 Dec 2009 12:51:14 +0000

1250W High power drum heater. For heating contents of 205 / 210 litre barrels (45 Imp Gal / 55 US Gal) High quality insulation and direct contact with the drum ensures much higher efficiency than normal band heaters. 1800-1950mm circumference, 850mm height. 240V with integral 0-90�C capillary thermostat. 5m supply cable (PVC insulated, sheathed, galvanised steel braided wire) GBP 949.00 January 30, 2010 ]]>

PBH-410 filtration system -

Tue, 1 Dec 2009 12:51:14 +0000

High-flow bag filtration system 10" Polypropylene housing (suitable for temperatures upto 38�C) with Viton o-ring Available with either 1" or 1.5" NPT inlet / outlet ports Supplied with either 2 x 1 micron polypropylene bags for biodiesel filtrationor 2 x 100 micron washable nylon mesh bags for used cooking oil filtration Complete with change-out gauge, spanner and 3/8" drain valve Max pressure 6.9 bar Recommended for biodiesel filtration rates ~100 litres / min GBP 195.00 January 30, 2010 ]]>

PBH-420 filtration system -

Tue, 1 Dec 2009 12:51:14 +0000

High-flow bag filtration system 20" Polypropylene housing (suitable for temperatures upto 38�C) with Viton o-ring Available with either 1" or 1.5" NPT inlet / outlet ports Supplied with either 2 x 1 micron polypropylene bags for biodiesel filtrationor 2 x 100 micron washable nylon mesh bags for used cooking oil filtration Complete with change-out gauge, spanner and 3/8" drain valve Max pressure 6.2 bar Recommended for biodiesel & used cooking oil filtration rates ~100 litres / min GBP 229.00 January 30, 2010 ]]>

Wintron XC30 - 1 litre -

Tue, 1 Dec 2009 12:51:14 +0000

Wintron XC30 - 1 litre bottle Cold flow antigel additive / pour point depressant (PPD) specifically for biodieselSuitable for most types of biodiesel (B100) and biodiesel blends (B5, B20 etc.)Treat rate is typically 0.2% - 1.5% by volume, although this varies and is dependent on the type of biodiesel. GBP 9.99 January 30, 2010 ]]>

Baynox Solution - Biodiesel Stabilizer - 1000 litres -

Tue, 1 Dec 2009 12:51:14 +0000

890Kg / 1000 litres Baynox� solution in a standard IBC container Baynox� Solution Biodiesel Stabilizer is suitable for making biodiesel storage-stable. Baynox� Solution is the first choice for biodiesel made from rapeseed oil, palm oil, recycled cooking oils and animal fats. (Note: Baynox� Plus Solution is also available. Baynox� Plus Solution is recommended for more easily perishable types of biodiesel made from oils such as soya, sunflower and Jatropha nut oils .)Click here for Baynox Solution Technical Data Sheet Click here for Baynox Solution MSDS Baynox� prevents the premature oxidation of unsaturated fatty acid esters in biodiesel and hence the formation of highly volatile compounds and corrosive carboxylic acids as well as preventing the early formation of polymerized and cross-linked biodiesel gums. The recommended use concentration is 0.2 - 1.0 % l/l Baynox Solution Biodiesel Stabilizer does not have a corrosive action on metals and combusts without residue. It is not a hazardous material and does not require labeling in line with the Regulations on Hazardous Substances It is not subject to the Regulations on Flammable Liquids (VbF) Baynox� is a specially manufactured, highly concentrated solution of the distilled, high-purity active ingredient dissolved in very high purity RME biodiesel. The active substance does not have a corrosive action on ferrous metals. When cooled to temperatures below 0 �C the active ingredient may crystallize out. This does not constitute any loss in action. The active ingredient can be re-dissolved by warming and gently stirring. The active ingredient content is set at 20% g/l. This means that measuring out is easily done by measuring the volume. 1 litre Baynox Solution Biodiesel Stabilizer corresponds to 200 g active ingredient. GBP 2795.00 January 30, 2010 ]]>

LMDPE tank with coned bottom & horizonal outlet:500-2250 litres -

Tue, 1 Dec 2009 12:51:14 +0000

LMDPE tank in galvanised mild steel frame - horizontal outlet Please note: These tanks are built to order. Delivery time to mainland UK 14-35 days Available sizes: 500, 750, 1000, 1250, 1500, 1750, 2000, 2250 litres Construction: LMDPE (Linear Medium Density Polyethylene) natural colour 90� coned liner, UV stabilised and complete with 14" screw lid Galvanised mild steel frame with anti-tilt bars for increased safety EPDM inlet seal, 2" GRPP anti vacuum vent, tank drains to 2" BSPP stainless steel ball valve with PTFE seal Outlet aligned horizontally (see image) Features: Designed for long-term use, unlike 'single-trip' IBC containers Designed for stability in storage and transport 4 way fork lift truck entry Broad chemical compatibility and also well suited for high viscosity fluids Dimensions: Volume Dimensions (mm) Weight (litres) Length Width Height (Kg) 500 1180 1180 1525 150 750 1180 1180 1754 157 1000 1180 1180 1884 162 1250 1180 1180 2114 170 1500 1180 1180 2338 190 1750 1180 1180 2521 197 2000 1180 1180 2782 223 2250 1180 1180 3000 250 GBP 845.00 January 30, 2010 ]]>

3kW ATEX certified flameproof immersion heater -

Tue, 1 Dec 2009 12:51:14 +0000

3kW Flameproof immersion heaterATEX Certified Ex II 2 G EEx d IIC T4 Zone 1 Three low watts density 321 stainless steel sheathed embedded rod type elements (4.96 W/cm2 = 32 W/inch2) 381mm immersed length with 50mm inactiveLightweight cast aluminium power coated enclosure, weatherproof to IP672�" BSP 316L stainless steel boss fixing complete with Viton seal1 x M25 and 1 x M20 cable entryAuto-reset thermostat range +5/+80�CManual-reset limit thermostat set at 95�CTest Pressure 24 Bar g GBP 365.00 January 30, 2010 ]]>

PVDF delivery nozzle -

Tue, 1 Dec 2009 12:51:14 +0000

PVDF quick action hand tap delivery nozzle with Viton seals1" Hose Inlet, 22mm � NozzleMax. Flowrate 50L/MinMax. Viscosity 900 mPas (cPs)Max. Temperature 80�CMax. Pressure 3 barCompatibility includes biodiesel, fuel oils, new / used cooking oil, methanol and glycerol as well as highly concentrated acids including 98% sulphuric acid and strong sodium hydroxide solutions. GBP 119.00 January 30, 2010 ]]>

Stainless steel delivery nozzle -

Tue, 1 Dec 2009 12:51:14 +0000

Stainless steel quick action hand tap delivery nozzle with PTFE/FEP (polytetrafluoroethylene / fluorinated ethylene propylene) seals1" Hose Inlet, 28mm � NozzleMax. Flowrate 65L/MinMax. Viscosity 900 mPas (cPs)Max. Temperature 80�CMax. Pressure 4 barVery broad chemical compatibility including biodiesel, fuel oils, new / used cooking oil, methanol, glycerol and strong sodium hydroxide solutions. GBP 299.00 January 30, 2010 ]]>

Polypropylene delivery nozzle -

Tue, 1 Dec 2009 12:51:14 +0000

Polypropylene quick action hand tap delivery nozzle with Viton seals1" Hose Inlet, 22mm � NozzleMax. Flowrate 50L/MinMax. Viscosity 900 mPas (cPs)Max. Temperature 50�CMax. Pressure 3 barCompatibility includes biodiesel, fuel oils, new & used cooking oil and glycerol. GBP 79.50 January 30, 2010 ]]>

ETS30 - 0.55kW 316 s/s magnetic drive chemical pump -

Tue, 1 Dec 2009 12:51:14 +0000

ETS 30 - 316 stainless steel magnetic drive chemical pump - 0.55kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 183 l/min (11m3/hr) Max head: 13m 32mm inlet 25mm outlet Max temp: 140�C Max viscosity: 450cSt Max permissible solids: 5% by weight, 200micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% Yes *Sulphuric Acid Yes Acetic Acid No Propan-2-ol Yes Tetrahydrofuran (THF) Yes to 25�C Hydrochloric Acid No Citric Acid Yes Phosphoric Acid No * Sulphuric acid at 98% may have a moderate effect of stainless steel. Sulphuric acid below 90% will have an adverse effect on stainless steel. Click here for performance curve Options : 240V 50Hz Single phase motor 415V 50Hz Three phase motor 415V 50Hz Three phase ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) Flanges at inlet / outlet ports GBP 1845.00 January 30, 2010 ]]>

1" male NPT to 25mm (1") ID hose -

Tue, 1 Dec 2009 12:51:14 +0000

1" male NPT -> tail for 25mm (1") nominal bore hose Polypropylene Temperatures upto 70�C GBP 4.99 January 30, 2010 ]]>

1" male BSP to 25mm (1") ID hose -

Tue, 1 Dec 2009 12:51:14 +0000

1" male BSP-> tail for 25mm (1") nominal bore hose Polypropylene Temperatures upto 70�C GBP 1.99 January 30, 2010 ]]>

1.5" male BSP to 38mm (1.5") ID hose -

Tue, 1 Dec 2009 12:51:14 +0000

1.5" male BSP -> tail for 38mm (1.5") nominal bore hose Polypropylene Temperatures upto 70�C GBP 4.99 January 30, 2010 ]]>

2" male BSP to 50mm (2") ID hose -

Tue, 1 Dec 2009 12:51:14 +0000

2" male BSP -> tail for 50mm (2") nominal bore hose Polypropylene Temperatures upto 70�C GBP 6.50 January 30, 2010 ]]>

3" male BSP to 75mm (3") ID hose -

Tue, 1 Dec 2009 12:51:14 +0000

3" male BSP -> tail for 75mm (3") nominal bore hose Polypropylene Temperatures upto 70�C GBP 8.49 January 30, 2010 ]]>

1.5" male NPT to 38mm (1.5") ID hose -

Tue, 1 Dec 2009 12:51:14 +0000

1.5" male NPT -> tail for 38mm (1.5") nominal bore hose Polypropylene Temperatures upto 70�C GBP 6.50 January 30, 2010 ]]>

2" male NPT to 50mm (2") ID hose -

Tue, 1 Dec 2009 12:51:14 +0000

2" male NPT -> tail for 50mm (2") nominal bore hose Polypropylene Temperatures upto 70�C GBP 9.95 January 30, 2010 ]]>

100mm diameter in-line static mixer -

Tue, 1 Dec 2009 12:51:14 +0000

316 Stainless steel in-line static pipe mixer - 100mm diameter Significantly improves speed and efficiency of pump mixing processes 100mm diameter x 615mm length with NP16 RFSO flanged ends, secures inline with pipework on pipe mixing vessels 3 mixing elements 25mm NB female dosing boss Max design temperature 100�C Max design pressure 10 barg Conforms to DIN 5009.3.1-B Click here for full data sheet GBP 695.00 January 30, 2010 ]]>

80mm diameter in-line static mixer -

Tue, 1 Dec 2009 12:51:14 +0000

316 Stainless steel in-line static pipe mixer - 80mm diameter Significantly improves speed and efficiency of pump mixing processes 80mm diameter x 500mm length with NP16 RFSO flanged ends, secures inline with pipework on pipe mixing vessels 3 mixing elements 25mm NB female dosing boss Max design temperature 100�C Max design pressure 10 barg Conforms to DIN 5009.3.1-B Click here for full data sheet GBP 649.00 January 30, 2010 ]]>

50mm diameter 3 element in-line static mixer -

Tue, 1 Dec 2009 12:51:14 +0000

316 Stainless steel in-line static pipe mixer - 50mm diameter - 3 mixing elements Significantly improves speed and efficiency of pump mixing processes 50mm diameter x 445mm length with NP16 RFSO flanged ends, secures inline with pipework on pipe mixing vessels 3 mixing elements 25mm NB female dosing boss Max design temperature 100�C Max design pressure 10 barg Conforms to DIN 5009.3.1-B Click here for full data sheet GBP 495.00 January 30, 2010 ]]>

50mm diameter 4 element in-line static mixer -

Tue, 1 Dec 2009 12:51:14 +0000

316 Stainless steel in-line static pipe mixer - 50mm diameter - 4 mixing elements Significantly improves speed and efficiency of pump mixing processes 50mm diameter x 520mm length with NP16 RFSO flanged ends, secures inline with pipework on pipe mixing vessels 4 mixing elements 25mm NB female dosing boss Max design temperature 100�C Max design pressure 10 barg Conforms to DIN 5009.3.1-B Click here for full data sheet GBP 579.00 January 30, 2010 ]]>

25mm diameter 3 element in-line static mixer -

Tue, 1 Dec 2009 12:51:14 +0000

316 Stainless steel in-line static pipe mixer - 25mm diameter Significantly improves speed and efficiency of pump mixing processes 25mm diameter x 210mm length with NP16 RFSO flanged ends, secures inline with pipework on pipe mixing vessels 3 mixing elements 25mm NB female dosing boss Max design temperature 100�C Max design pressure 10 barg Conforms to DIN 5009.3.1-B Click here for full data sheet GBP 370.00 January 30, 2010 ]]>

25mm diameter 4 element in-line static mixer -

Tue, 1 Dec 2009 12:51:14 +0000

316 Stainless steel in-line static pipe mixer - 25mm diameter Significantly improves speed and efficiency of pump mixing processes 25mm diameter x 248mm length with NP16 RFSO flanged ends, secures inline with pipework on pipe mixing vessels 4 mixing elements 25mm NB female dosing boss Max design temperature 100�C Max design pressure 10 barg Conforms to DIN 5009.3.1-B Click here for full data sheet GBP 420.00 January 30, 2010 ]]>

ATEX certfied compressed air driven universal barrel pump -

Tue, 1 Dec 2009 12:51:14 +0000

For transfer of a very wide variety of liquids in hazardous areas or pumping highly flammable liquids from 205 litre barrels / drums. Suitable for transfer of Methanol, ethanol, alchohol/hydroxide mixtures, biodiesel, fuel oils, new or used cooking oil, glycerol, acetic acid, tetrahydrafuran (THF), alkyl alcohols. Delivery rate max: 240 l/min, delivery head upto 13 m (dependent upon liquid being transferred) Viscosity upto 1000 mPas (cP), temperatures upto 120�C. Stainless steel (316Ti) barrel pump, sealless shaft, ETFE impellor, outer-� 41/43 mm, BSP 1 1/4" male to DN19 conductive chemical delivery hose with stainless steel/PTFE/FEP quick action tap. 1000mm immersed length. Polypropylene compression gland. Compressed air motor, explosion proof. ATEX certified Ex II 2 G cp IIC T6. Max air consumption at 6 bar - approx 14 L/s (30cfm) GBP 1439.00 January 30, 2010 ]]>

ATEX certified compressed air driven universal IBC pump -

Tue, 1 Dec 2009 12:51:14 +0000

For transfer of a very wide variety of liquids in hazardous areas or pumping highly flammable liquids from standard 1000 litre IBCs Suitable for transfer of Methanol, ethanol, alchohol/hydroxide mixtures, biodiesel, fuel oils, new or used cooking oil, glycerol, acetic acid, tetrahydrafuran (THF), alkyl alcohols. Delivery rate max: 240 l/min, delivery head upto 13 m (dependent upon liquid being transferred) Viscosity upto 1000 mPas (cP), temperatures upto 120�C. Stainless steel (316Ti) barrel pump, sealless shaft, ETFE impellor, outer-� 41/43 mm, BSP 1 1/4" male to DN19 conductive chemical delivery hose with stainless steel/PTFE/FEP quick action tap. 1200mm immersed length. Polypropylene compression gland. Compressed air motor, explosion proof. ATEX certified Ex II 2 G cp IIC T6. Max air consumption at 6 bar - approx 14 L/s (30cfm) GBP 1539.00 January 30, 2010 ]]>

ATEX certified high vicosity liquid barrel pump -

Tue, 1 Dec 2009 12:51:14 +0000

ATEX certified barrel emptying pump for high viscosity liquids Viscous liquids such as Wintron XC30 can be pumped from barrels with this system. Suitable for use in Ex hazardous areas F550GSXB-50/21-1000mm Eccentric worm drive pump complete with conductive PTFE Stator Unit and 1.1/2" hose connection Supplied as standard with F460-1Ex, 230V, 700 watt, IP55 electrical drive motor. Certified to 94/9/EC-ATEX 100a, II 2 G EEx de IIC T6. Suitable for viscosities upto 25,000 mPas (cP) Alternatively can be supplied with compressed air driven motor - type F416Ex. Suitable for viscosities upto 30,000 mPas (cP) Image shows pump with ATEX certified electrical commutator motor Also included: -2m long Earth Bonding Cable -50mm compression Gland, to securely fix the pump into the drum opening - 2" Male BSP thread -Discharge spout in 316Ti Stainless steel complete with adaptor fitting, to allow filling of adjacent containers GBP 2495.00 January 30, 2010 ]]>

ATEX certified high viscosity liquid IBC pump -

Tue, 1 Dec 2009 12:51:14 +0000

ATEX certified IBC emptying pump for high viscosity liquids Viscous liquids such as Wintron XC30 can be pumped from IBCs with this system. Suitable for use in Ex hazardous areas F550GSXB-50/21-1200mm Eccentric worm drive pump complete with conductive PTFE Stator Unit and 1.1/2" hose connection Supplied as standard with F460-1Ex, 230V, 700 watt, IP55 electrical drive motor. Certified to 94/9/EC-ATEX 100a, II 2 G EEx de IIC T6. Suitable for viscosities upto 25,000 mPas (cP) Alternatively can be supplied with compressed air driven motor - type F416Ex. Suitable for viscosities upto 30,000 mPas (cP) Also included: -2m long Earth Bonding Cable GBP 2395.00 January 30, 2010 ]]>

The Biodiesel Handbook -

Tue, 1 Dec 2009 12:51:14 +0000

New. Hardback. In stock. Dispatched from UK. ISBN 1893997790 / 9781893997790 The Biodiesel Handbook Gerhard Knothe, Jon Van Gerpen, and J�rgen Krahl Hardback, 304 pages, 2005. Publisher AOCS. ISBN 1-893997-79-0 The most authoratitive and detailed publication currently available about biodiesel. Many researchers around the world have dealt with the legislative, chemical, and engineering issues that result from the study of biodiesel. The Biodiesel Handbook summarizes these issues and how they have been dealt with, but also presents new data and technical information. Chapters include summaries on legislative and regulatory efforts around the world, the history of vegetable oil-based diesel fuels, the basic concept of the diesel engine, and glycerol, a valuable byproduct of biodiesel production...The most up-to-date resource on biodiesel available Contents Introduction: What is Biodiesel' The History of Vegetable Oil-Based Diesel Fuels The Basics of Diesel Engines and Diesel Fuel Basics of the Transesterification Reaction Alternate Feedstocks and Technologies for Biodiesel Production Analytical Methods for Biodiesel Cetane Numbers-Heat of Combustion-Why Vegetable Oils and Their Derivatives Are Suitable as a Diesel Fuel Viscosity of Biodiesel Cold Weather Properties and Performance of Biodiesel Oxidative Stability of Biodiesel: Literature Overview Stability of Biodiesel Biodiesel Lubricity Biodegradability, Biological and Chemical Oxygen Demand, and Toxicity of Biodiesel Fuels Soybean Oil Composition for Biodiesel Impact of Biodiesel Fuel on Pollutant Emissions from Diesel Engines Influence of Biodiesel and Different Petrodiesel Fuels on Exhaust Emissions and Health Effects Current Status of Biodiesel in the United States Current Status of Biodiesel in the European Union Biodiesel Quality Management: the AGQM Story Status of Biodiesel in Asia, the Americas, Australia and South Africa Environmental Implications of Biodiesel (Life-Cycle Assessment) Potential Production of Biodiesel Other Uses of Biodiesel Other Alternative Diesel Fuels from Vegetable Oils Glycerol Appendix A: Technical Tables Appendix B: Biodiesel Standards Appendix C: Internet Resources GBP 49.95 January 30, 2010 ]]>

Sodium hydroxide solution - 1 litre -

Tue, 1 Dec 2009 12:51:14 +0000

1 gram anhydrous sodium hydroxide dissolved in 1 litre distilled water GBP 9.95 January 30, 2010 ]]>

Propan-2-ol - 1 litre -

Tue, 1 Dec 2009 12:51:14 +0000

Propan-2-ol - 1 litre bottle GBP 9.95 January 30, 2010 ]]>

Vegetable oil transfer pump (50 l/min) -

Tue, 1 Dec 2009 12:51:14 +0000

Viscomat 90 M - pump for viscous liquids upto 500 cSt Suitable for vegetable oil and biodiesel Flow rate upto 50 litres / min High suction capacity Pressures upto 5 Bar 1.6kW single phase (230V 50Hz) TEFV motor IP55 rated 1" BSP inlet / outlet Options: Three-phase version available (400V/50Hz) GBP 249.00 January 30, 2010 ]]>

Biodiesel pump system (56 l/min) -

Tue, 1 Dec 2009 12:51:14 +0000

Cube 56 Biodiesel pump system Complete with pump, flow meter, hose and delivery nozzle Optional IBC coupling kit: IBC adapter, 2m hose, swivel & 1" hosetail Flow rate upto 56 litres / min Accuracy of flow meter +/- 1% Technical features Self-supporting stamped-plate structure, treated against corrosion and paint-finished, ready to install. Self-priming vane pump, fitted with bypass valve, mounted on antivibration supports. Mechanical seal. Self-ventilated enclosed motor (IP 55), single-phase versions provided with heat protection. Intake filter for pump protection Disc meter with mechanical readout system Automatic pump nozzle complete with flexible biodiesel compatible hose and swivel connection In-built nozzle-holder provided with pump start/stop lever Noise level: below 70 dB Rated for continuous operation at 230 V GBP 349.00 January 30, 2010 ]]>

0.55kW 316 s/s Centrifugal Chemical Pump -

Tue, 1 Dec 2009 12:51:14 +0000

0.55kW 316 stainless steel Chemical pump with Viton (FKM) seals Open impeller centrifugal pump manufactured from stainless steel AISI 316L.Electro-polished surfaces with high finish and high mechanical strength. These pumps are very simple to maintain having only a small number of components (only 19 parts) most of which can be expected to last a life-time. Standard ports - 1" BSPM inlet 3/4" BSPM outlet Rated performance: Qmax - 16m3/hr (266 l/min) / Hmax 10m / Max pressure 1.1 Bar Technical data / limits Max temp 90�C Max viscosity ~200 cSt Max particle size 6mm Standard version: 3-phase 0.55kW 2-pole IP55 motor Options available Single-phase Explosion protected version available - ATEX certified (Zone 1 - E Ex d - max temperature class T4 : ATEX marking Ex II EEx d IIB T4 T3) Other versions available on request: US versions - NEMA spec UL : 3-phase / 60 Hz motors - 220V & 480V. Ex Zone 1 Hazard area version also available SMS thread or flanges at inlet & outlet ports Click here for performance curve (based on water @ 20�C) GBP 439.00 January 30, 2010 ]]>

Automated cold filter plugging point (CFPP) analyzer -

Tue, 1 Dec 2009 12:51:14 +0000

ISL FPP5Gs - Stand alone automated CFPP analyzer The only portable instrument that performs CFPP test according to EN 116 conditions Built in cooling system - stand alone unit that does not require any external liquid connectionNo heat, no noise, no external liquid connection, no toxic coolant vapours, small footprint Features: Accurate determination of CFPP in perfect accordance with EN 116, IP 309, ASTM D 6731 or customisable test methods Ultra powerful built in cooling system can start test instantaneously and cool jacket within minutesStepped cooling profiles as per EN 116 to -34�C, -51�C or -69�C with programmable cooling rate: 1 to 50�C / hour Compact and easy to use - 250 x 650mm footprint Alphanumeric solvent proof keypad and large easy-to-read LCD display �C or �F configurable RS232c output for connection to PC Test method:45 ml of test specimen is cooled under specified conditions. At intervals of 1�C, a 200 mm H2O vacuum is applied to draw up the fuel specimen into a 20 ml pipette through a 45 micron mesh filter. As the fuel specimen cools, the amount of wax crystals increase. The temperature at which either the fuel specimen ceases to flow through the filter within 60 seconds or fails to return into the test jar is recorded as the Cold Filter Plugging Point. GBP 19950.00 January 30, 2010 ]]>

Wall mounting bracket for PBH housings -

Tue, 1 Dec 2009 12:51:14 +0000

Stainless steel wall mounting bracket with screws For PBH 410 & 420 filter housings GBP 32.00 January 30, 2010 ]]>

Basic biodiesel titration kit -

Tue, 1 Dec 2009 12:51:14 +0000

Basic biodiesel titration kit Determination %FFA of used cooking oil Determination of excess hydroxide (catalyst) requirement Determination of acid number of final biodiesel Kit includes: 50ml Burette with stand and 75mm filling funnel 10ml Graduated pipette with filler 2 x 250ml Beakers Stirring rod 1 litre Propan-2-ol 1 litre Sodium hydroxide solution (1g per litre distilled water) 500ml Full range Universal Indicator solution Optional scales GBP 119.00 January 30, 2010 ]]>

Automated fuel composition analyzer -

Tue, 1 Dec 2009 12:51:14 +0000

Fully automated fuel composition analyzer Mid- and near IR spectroscopic fuel analysis Determination of: Cetane number Cetane index Density Heat of combusion Ester content As well as cetane improver, polynuclear aromatics and napthalenes in the case of diesel fuels Fully portable 3 minute test time Only 10ml sample required No sample prep required No technical training necessary 100-240V AC 50/60Hz 12V DC option available Dimensions: 25 x 25 x 30cm GBP 18950.00 January 30, 2010 ]]>

Universal Indicator Solution - 500ml -

Tue, 1 Dec 2009 12:51:14 +0000

Full range Universal Indicator Solution - 500ml pH range 1-14 Colour chart with bottle GBP 24.95 January 30, 2010 ]]>

Aluminium automatic shut-off nozzle -

Tue, 1 Dec 2009 12:51:14 +0000

Husky 1-HS - Automatic shut-off nozzle Compatible with: Biodiesel Fuel oils including Diesel & Kerosene Methanol Full nozzle guard and lever cover protect vehicle and nozzle, and insulate users hands from the elements Accu-Flo poppet allows accurate "to the-penny" fuel dispensing Flow rate upto 95 litres Construction: Die cast aluminium body One piece contoured steel lever with hard plastic cover Viton (fluorocarbon) disc Double o-ring seal protected by fibre reinforced Teflon 1" BSP inlet High flow spout GBP 69.00 January 30, 2010 ]]>

Scout Pro - 6000g x 0.1g -

Tue, 1 Dec 2009 12:51:14 +0000

Ohaus Scout Pro SPU6000 - Superior performance portable balance Ohaus takes the classic Scout� balance to the next level with the all-new Scout Pro! Designed for use in laboratory, industrial or education applications, the Ohaus Scout Pro continues the tradition set by the Ohaus Scout and Scout II products. Featuring easy-to-use two-button operation, a high-contrast LCD display, multiple weighing units, four application modes, and the option of either RS232 or USB connectivity, the Scout Pro is the portable balance for you! 6000g capacity x 0.1g readability Multiple Weighing Units - Including grams, kilograms, pounds, ounces, a combined pound:ounce display, troy ounces and pennyweights Multiple Application Modes - Including enhanced parts counting, percentage weighing, totalization, and display hold Easy to Use - The high-contrast LCD display combined with two key operation makes the Scout Pro a snap to operate USB or RS232 Connectivity - Quickly-installed option with integral cable allows data connection to PC or printer Easy to Clean - Removable stainless steel weighing platform, sealed front panel and molded spill ring help keep the Scout Pro safe from spills Battery or AC Power - Uses 4 x AA batteries. Auto shut-off feature for 40 hours of operation, or the Scout Pro can be run on the included AC powerpack Integral Weigh-Below Hook - Critical for density or specific gravity determination GBP 159.00 January 30, 2010 ]]>

High flow 12v biodiesel transfer pump -

Tue, 1 Dec 2009 12:51:14 +0000

12V High flow biodiesel transfer pump Flow rate upto 85 litres / minute Self priming rotary vane pump with 12V DC motor 1" female BSP ports with flanged connectors Technical features: Cast iron pump body finished with anti-corrosion paint Vane pump with sintered steel rotor and acetal resin vanes By-pass valve incorporated in the pump body Direct current brush motor with permanent magnet stator Ingress protection grade - IP55 (weather proof) Used in intermittent service with 30-minute work cycles Pump attachment support bracket Supplied with 2m power cable, incorporated fuses and clamps for connection to terminal strips Available options IBC coupling kit: IBC adapter, 2m hose, swivel & 1" hosetail Delivery hose & nozzle: Aluminium delivery nozzle with Viton seals, 3m hose & 1" hose-tail GBP 199.00 January 30, 2010 ]]>

Baynox Solution - 1 litre bottle -

Tue, 1 Dec 2009 12:51:14 +0000

Baynox� Solution Biodiesel Stabilizer is suitable for making biodiesel storage-stable. Baynox� Solution is the first choice for biodiesel made from rapeseed oil, palm oil, recycled cooking oils and animal fats. (Note: Baynox� Plus Solution is also available. Baynox� Plus Solution is recommended for more easily perishable types of biodiesel made from oils such as soya, sunflower and Jatropha nut oils .) Click here for Baynox Solution Technical Data Sheet Click here for Baynox Solution MSDS Baynox� prevents the premature oxidation of unsaturated fatty acid esters in biodiesel and hence the formation of highly volatile compounds and corrosive carboxylic acids as well as preventing the early formation of polymerized and cross-linked biodiesel gums. The recommended use concentration is 0.2 - 1.0 % l/l Baynox Solution Biodiesel Stabilizer does not have a corrosive action on metals and combusts without residue. It is not a hazardous material and does not require labeling in line with the Regulations on Hazardous Substances It is not subject to the Regulations on Flammable Liquids (VbF) Baynox� is a specially manufactured, highly concentrated solution of the distilled, high-purity active ingredient dissolved in very high purity RME biodiesel. The active substance does not have a corrosive action on ferrous metals. When cooled to temperatures below 0 �C the active ingredient may crystallize out. This does not constitute any loss in action. The active ingredient can be re-dissolved by warming and gently stirring. The active ingredient content is set at 20% g/l. This means that measuring out is easily done by measuring the volume. 1 litre Baynox Solution Biodiesel Stabilizer corresponds to 200 g active ingredient. GBP 9.99 January 30, 2010 ]]>

LMDPE tank with coned bottom & vertical outlet:600-1200 litres -

Tue, 1 Dec 2009 12:51:14 +0000

LMDPE tank in galvanised mild steel frame - vertical outlet Please note: These tanks are built to order. Delivery time to mainland UK 14-35 days Available sizes: 600, 800, 1000, 1200 litres Construction: LMDPE (Linear Medium Density Polyethylene) natural colour 90� coned liner, UV stabilised and complete with 14" screw lid Galvanised mild steel frame with anti-tilt bars for increased safety EPDM inlet seal, 2" GRPP anti vacuum vent, tank drains to 2" BSPP stainless steel ball valve with PTFE seal Outlet aligned vertically (see image) Features: Designed for long-term use, unlike 'single-trip' IBC containers Designed for stability in storage and transport 4 way fork lift truck entry Broad chemical compatibility and also well suited for high viscosity fluids Dimensions: Volume Dimensions (mm) Weight (litres) Length Width Height (Kg) 600 1145 1145 1470 145 800 1145 1145 1685 160 1000 1145 1145 1890 165 1200 1145 1145 2120 175 GBP 845.00 January 30, 2010 ]]>

Stainless steel tank:600&1000 litres -

Tue, 1 Dec 2009 12:51:14 +0000

316 stainless steel tank Please note: These tanks are built to order. Delivery time to mainland UK 14-38 days Available sizes: 600 & 1000 litres Features: UN Group II approved Max. working pressure 1.36 Bar (20 PSI) Designed for the transportation, storage and pressure discharge of hazardous liquids Anti-tilt facility Four way fork lift truck entry / two way pallet truck entry Construction: 316 s/s cylindrical tank body with domed top and bottom Bolted on to a galvanised mild steel pallet base 24 bolt lid with PTFE seal, 2 x 1.5" camlock and dustcaps and 1" S316 pressure/vacuum vent set to 3 psi /1 hg 316 stainless steel hemispherical base with 2" stainless pipework leading to a 2 piece S316 ball valve with PTFE seal, camlock & dustcap Dimensions: Volume Dimensions (mm) Weight (litres) Length Width Height (Kg) 600 1200 1200 1410 290 1000 1200 1200 1810 396 GBP 6950.00 January 30, 2010 ]]>

0.37kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.37kW 2-pole (2750rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 71M Specification: Output (kW) 0.37 Frame size 71M Speed (rpm) 2750 Rated current 400V (A) 0.98 Power factor (cosφ) 0.81 Efficiency (%) 67 Rated torque (Nm) 1.3 Starting torque (Nm) 2.3 Starting current (A) 4.3 B/down torque (Nm) 2.3 Moment of inertia (Kgm�) 0.00035 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 395.00 January 30, 2010 ]]>

0.55kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.55kW 2-pole (2790rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 71M Specification: Output (kW) 0.55 Frame size 71M Speed (rpm) 2950 Rated current 400V (A) 1.38 Power factor (cosφ) 0.81 Efficiency (%) 71 Rated torque (Nm) 1.9 Starting torque (Nm) 2.3 Starting current (A) 5.3 B/down torque (Nm) 2.3 Moment of inertia (Kgm�) 0.00045 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 409.00 January 30, 2010 ]]>

0.75kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.75kW 2-pole (2840rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 80M Specification: Output (kW) 0.75 Frame size 80M Speed (rpm) 2840 Rated current 400V (A) 1.75 Power factor (cosφ) 0.86 Efficiency (%) 72 Rated torque (Nm) 2.5 Starting torque (Nm) 2.4 Starting current (A) 6.3 B/down torque (Nm) 2.3 Moment of inertia (Kgm�) 0.00085 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 426.00 January 30, 2010 ]]>

1.1kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

1.1kW 2-pole (2835rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 80M Specification: Output (kW) 1.1 Frame size 80M Speed (rpm) 2835 Rated current 400V (A) 2.45 Power factor (cosφ) 0.87 Efficiency (%) 74 Rated torque (Nm) 3.7 Starting torque (Nm) 2.6 Starting current (A) 6.3 B/down torque (Nm) 2.3 Moment of inertia (Kgm�) 0.0011 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 472.00 January 30, 2010 ]]>

1.5kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

1.5kW 2-pole (2850rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 90L Specification: Output (kW) 1.5 Frame size 90L Speed (rpm) 2850 Rated current 400V (A) 3.3 Power factor (cosφ) 0.84 Efficiency (%) 78 Rated torque (Nm) 5.0 Starting torque (Nm) 2.5 Starting current (A) 6.7 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 0.0015 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 524.00 January 30, 2010 ]]>

2.2kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

2.2kW 2-pole (2860rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 90L Specification: Output (kW) 2.2 Frame size 90L Speed (rpm) 2860 Rated current 400V (A) 4.6 Power factor (cosφ) 0.86 Efficiency (%) 80 Rated torque (Nm) 7.4 Starting torque (Nm) 2.8 Starting current (A) 7.1 B/down torque (Nm) 2.8 Moment of inertia (Kgm�) 0.0020 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 602.00 January 30, 2010 ]]>

3kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

3kW 2-pole (2885rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 100L Specification: Output (kW) 3 Frame size 100L Speed (rpm) 2885 Rated current 400V (A) 6.2 Power factor (cosφ) 0.85 Efficiency (%) 82 Rated torque (Nm) 9.9 Starting torque (Nm) 2.8 Starting current (A) 7.7 B/down torque (Nm) 3 Moment of inertia (Kgm�) 0.0038 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 686.00 January 30, 2010 ]]>

4kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

4kW 2-pole (2895rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 112M Specification: Output (kW) 4 Frame size 112M Speed (rpm) 2895 Rated current 400V (A) 7.8 Power factor (cosφ) 0.88 Efficiency (%) 84 Rated torque (Nm) 13 Starting torque (Nm) 2.4 Starting current (A) 7.6 B/down torque (Nm) 2.8 Moment of inertia (Kgm�) 0.0055 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 834.00 January 30, 2010 ]]>

5.5kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

5.5kW 2-pole (2910rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 132S Specification: Output (kW) 5.5 Frame size 132S Speed (rpm) 2910 Rated current 400V (A) 11.1 Power factor (cosφ) 0.86 Efficiency (%) 83 Rated torque (Nm) 18 Starting torque (Nm) 2.0 Starting current (A) 6.3 B/down torque (Nm) 2.6 Moment of inertia (Kgm�) 0.016 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 982.00 January 30, 2010 ]]>

7.5kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

7.5kW 2-pole (2905rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 132S Specification: Output (kW) 7.5 Frame size 132S Speed (rpm) 2905 Rated current 400V (A) 14.5 Power factor (cosφ) 0.89 Efficiency (%) 84 Rated torque (Nm) 25 Starting torque (Nm) 2.2 Starting current (A) 6.9 B/down torque (Nm) 2.6 Moment of inertia (Kgm�) 0.021 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1166.00 January 30, 2010 ]]>

11kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

11kW 2-pole (2915rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 160M Specification: Output (kW) 11 Frame size 160M Speed (rpm) 2915 Rated current 400V (A) 21 Power factor (cosφ) 0.89 Efficiency (%) 85 Rated torque (Nm) 36 Starting torque (Nm) 2.0 Starting current (A) 6.3 B/down torque (Nm) 2.6 Moment of inertia (Kgm�) 0.034 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1463.00 January 30, 2010 ]]>

15kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

15kW 2-pole (2925rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 160M Specification: Output (kW) 15 Frame size 160M Speed (rpm) 2925 Rated current 400V (A) 28 Power factor (cosφ) 0.89 Efficiency (%) 87 Rated torque (Nm) 49 Starting torque (Nm) 2.3 Starting current (A) 7.2 B/down torque (Nm) 3.1 Moment of inertia (Kgm�) 0.040 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1728.00 January 30, 2010 ]]>

18.5kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

18.5kW 2-pole (2925rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 160L Specification: Output (kW) 18.5 Frame size 160L Speed (rpm) 2925 Rated current 400V (A) 33.5 Power factor (cosφ) 0.89 Efficiency (%) 89 Rated torque (Nm) 60 Starting torque (Nm) 2.4 Starting current (A) 7.7 B/down torque (Nm) 3.3 Moment of inertia (Kgm�) 0.052 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1950.00 January 30, 2010 ]]>

22kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

22kW 2-pole (2940rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 180M Specification: Output (kW) 22 Frame size 180M Speed (rpm) 2940 Rated current 400V (A) 39 Power factor (cosφ) 0.88 Efficiency (%) 92 Rated torque (Nm) 71 Starting torque (Nm) 2.5 Starting current (A) 6.9 B/down torque (Nm) 3.2 Moment of inertia (Kgm�) 0.077 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 2512.00 January 30, 2010 ]]>

30kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

30kW 2-pole (2940rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 200L Specification: Output (kW) 30 Frame size 200L Speed (rpm) 2940 Rated current 400V (A) 53 Power factor (cosφ) 0.89 Efficiency (%) 92.3 Rated torque (Nm) 97 Starting torque (Nm) 2.4 Starting current (A) 6.5 B/down torque (Nm) 2.8 Moment of inertia (Kgm�) 0.14 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 2904.00 January 30, 2010 ]]>

37kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

37kW 2-pole (2945rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 200L Specification: Output (kW) 37 Frame size 200L Speed (rpm) 2945 Rated current 400V (A) 64 Power factor (cosφ) 0.90 Efficiency (%) 92.8 Rated torque (Nm) 120 Starting torque (Nm) 2.4 Starting current (A) 7.7 B/down torque (Nm) 2.8 Moment of inertia (Kgm�) 0.16 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 3900.00 January 30, 2010 ]]>

45kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

45kW 2-pole (2955rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 225M Specification: Output (kW) 45 Frame size 225M Speed (rpm) 2955 Rated current 400V (A) 77 Power factor (cosφ) 0.9 Efficiency (%) 93.9 Rated torque (Nm) 145 Starting torque (Nm) 2.3 Starting current (A) 6.9 B/down torque (Nm) 2.7 Moment of inertia (Kgm�) 0.24 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 5850.00 January 30, 2010 ]]>

55kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

55kW 2-pole (2965rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 250M Specification: Output (kW) 55 Frame size 250M Speed (rpm) 2965 Rated current 400V (A) 94 Power factor (cosφ) 0.9 Efficiency (%) 93.7 Rated torque (Nm) 177 Starting torque (Nm) 2.1 Starting current (A) 6.9 B/down torque (Nm) 2.8 Moment of inertia (Kgm�) 0.45 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 6943.00 January 30, 2010 ]]>

75kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

75kW 2-pole (2975rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 280S Specification: Output (kW) 75 Frame size 280S Speed (rpm) 2975 Rated current 400V (A) 128 Power factor (cosφ) 0.9 Efficiency (%) 94.7 Rated torque (Nm) 241 Starting torque (Nm) 1.9 Starting current (A) 7 B/down torque (Nm) 2.7 Moment of inertia (Kgm�) 0.79 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 8809.00 January 30, 2010 ]]>

90kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

90kW 2-pole (2975rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 280M Specification: Output (kW) 90 Frame size 280M Speed (rpm) 2975 Rated current 400V (A) 150 Power factor (cosφ) 0.91 Efficiency (%) 95.1 Rated torque (Nm) 289 Starting torque (Nm) 2 Starting current (A) 7 B/down torque (Nm) 2.7 Moment of inertia (Kgm�) 0.92 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 10314.00 January 30, 2010 ]]>

110kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

110kW 2-pole (2980rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 315S Specification: Output (kW) 110 Frame size 315S Speed (rpm) 2980 Rated current 400V (A) 186 Power factor (cosφ) 0.9 Efficiency (%) 94.8 Rated torque (Nm) 353 Starting torque (Nm) 1.8 Starting current (A) 7 B/down torque (Nm) 2.8 Moment of inertia (Kgm�) 1.3 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 12084.00 January 30, 2010 ]]>

132kW 2-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

132kW 2-pole (2980rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 315M Specification: Output (kW) 132 Frame size 315M Speed (rpm) 2980 Rated current 400V (A) 225 Power factor (cosφ) 0.9 Efficiency (%) 95.1 Rated torque (Nm) 423 Starting torque (Nm) 1.9 Starting current (A) 7 B/down torque (Nm) 2.8 Moment of inertia (Kgm�) 1.5 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 13992.00 January 30, 2010 ]]>

0.25kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.25kW 4-pole (1325rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 71M Specification: Output (kW) 0.25 Frame size 71M Speed (rpm) 1325 Rated current 400V (A) 0.78 Power factor (cosφ) 0.77 Efficiency (%) 60 Rated torque (Nm) 1.8 Starting torque (Nm) 1.8 Starting current (A) 3.2 B/down torque (Nm) 1.8 Moment of inertia (Kgm�) 0.0006 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 392.00 January 30, 2010 ]]>

0.37kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.37kW 4-pole (1325rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 71M Specification: Output (kW) 0.37 Frame size 71M Speed (rpm) 1325 Rated current 400V (A) 0.78 Power factor (cosφ) 0.77 Efficiency (%) 60 Rated torque (Nm) 1.8 Starting torque (Nm) 1.8 Starting current (A) 3.2 B/down torque (Nm) 1.8 Moment of inertia (Kgm�) 0.0006 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 406.00 January 30, 2010 ]]>

0.55kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.55kW 4-pole (1395rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 80M Specification: Output (kW) 0.55 Frame size 80M Speed (rpm) 1395 Rated current 400V (A) 1.42 Power factor (cosφ) 0.79 Efficiency (%) 71 Rated torque (Nm) 3.7 Starting torque (Nm) 2.3 Starting current (A) 4.7 B/down torque (Nm) 2.4 Moment of inertia (Kgm�) 0.0015 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 446.00 January 30, 2010 ]]>

0.75kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.75kW 4-pole (1395rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 80M Specification: Output (kW) 0.75 Frame size 80M Speed (rpm) 1395 Rated current 400V (A) 1.88 Power factor (cosφ) 0.79 Efficiency (%) 73 Rated torque (Nm) 5.1 Starting torque (Nm) 2.5 Starting current (A) 5.0 B/down torque (Nm) 2.6 Moment of inertia (Kgm�) 0.0018 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 451.00 January 30, 2010 ]]>

1.1kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

1.1kW 4-pole (1410rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 90L Specification: Output (kW) 1.1 Frame size 90L Speed (rpm) 1410 Rated current 400V (A) 2.7 Power factor (cosφ) 0.81 Efficiency (%) 73 Rated torque (Nm) 7.5 Starting torque (Nm) 2.1 Starting current (A) 4.9 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 0.0028 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 477.00 January 30, 2010 ]]>

1.5kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

1.5kW 4-pole (1420rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 90L Specification: Output (kW) 1.5 Frame size 90L Speed (rpm) 1420 Rated current 400V (A) 3.5 Power factor (cosφ) 0.80 Efficiency (%) 77 Rated torque (Nm) 10 Starting torque (Nm) 2.2 Starting current (A) 5.8 B/down torque (Nm) 2.6 Moment of inertia (Kgm�) 0.0035 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 512.00 January 30, 2010 ]]>

2.2kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

2.2kW 4-pole (1420rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 100L Specification: Output (kW) 2.2 Frame size 100L Speed (rpm) 1420 Rated current 400V (A) 5.1 Power factor (cosφ) 0.80 Efficiency (%) 78 Rated torque (Nm) 15 Starting torque (Nm) 2.2 Starting current (A) 6.0 B/down torque (Nm) 2.6 Moment of inertia (Kgm�) 0.0048 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 573.00 January 30, 2010 ]]>

3kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

3kW 4-pole (1415rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 100L Specification: Output (kW) 3 Frame size 100L Speed (rpm) 1415 Rated current 400V (A) 6.6 Power factor (cosφ) 0.82 Efficiency (%) 80 Rated torque (Nm) 20 Starting torque (Nm) 2.7 Starting current (A) 6.4 B/down torque (Nm) 3.0 Moment of inertia (Kgm�) 0.0058 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 691.00 January 30, 2010 ]]>

4kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

4kW 4-pole (1435rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 112M Specification: Output (kW) 4 Frame size 112M Speed (rpm) 1435 Rated current 400V (A) 8.5 Power factor (cosφ) 0.82 Efficiency (%) 83 Rated torque (Nm) 27 Starting torque (Nm) 2.8 Starting current (A) 7.2 B/down torque (Nm) 3.0 Moment of inertia (Kgm�) 0.011 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 799.00 January 30, 2010 ]]>

5.5kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

5.5kW 4-pole (1450rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 132S Specification: Output (kW) 5.5 Frame size 132S Speed (rpm) 1450 Rated current 400V (A) 11.1 Power factor (cosφ) 0.83 Efficiency (%) 86 Rated torque (Nm) 36 Starting torque (Nm) 2.4 Starting current (A) 6.9 B/down torque (Nm) 3.3 Moment of inertia (Kgm�) 0.018 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1004.00 January 30, 2010 ]]>

7.5kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

7.5kW 4-pole (1450rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 132M Specification: Output (kW) 7.5 Frame size 132M Speed (rpm) 1450 Rated current 400V (A) 15 Power factor (cosφ) 0.84 Efficiency (%) 86 Rated torque (Nm) 49 Starting torque (Nm) 2.7 Starting current (A) 7.7 B/down torque (Nm) 3.3 Moment of inertia (Kgm�) 0.024 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1177.00 January 30, 2010 ]]>

11kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

11kW 4-pole (1455rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 160M Specification: Output (kW) 11 Frame size 160M Speed (rpm) 1455 Rated current 400V (A) 21.5 Power factor (cosφ) 0.85 Efficiency (%) 87 Rated torque (Nm) 72 Starting torque (Nm) 2.4 Starting current (A) 6.6 B/down torque (Nm) 2.9 Moment of inertia (Kgm�) 0.04 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1452.00 January 30, 2010 ]]>

15kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

15kW 4-pole (1465rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 160L Specification: Output (kW) 15 Frame size 160L Speed (rpm) 1465 Rated current 400V (A) 28.5 Power factor (cosφ) 0.85 Efficiency (%) 89 Rated torque (Nm) 98 Starting torque (Nm) 2.8 Starting current (A) 7.4 B/down torque (Nm) 3.2 Moment of inertia (Kgm�) 0.052 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1781.00 January 30, 2010 ]]>

18.5kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

18.5kW 4-pole (1460rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 180M Specification: Output (kW) 18.5 Frame size 180M Speed (rpm) 1460 Rated current 400V (A) 35 Power factor (cosφ) 0.84 Efficiency (%) 90.5 Rated torque (Nm) 121 Starting torque (Nm) 2.3 Starting current (A) 7.1 B/down torque (Nm) 3.0 Moment of inertia (Kgm�) 0.13 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 2194.00 January 30, 2010 ]]>

22kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

22kW 4-pole (1460rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 180L Specification: Output (kW) 22 Frame size 180L Speed (rpm) 1460 Rated current 400V (A) 41 Power factor (cosφ) 0.85 Efficiency (%) 91.2 Rated torque (Nm) 144 Starting torque (Nm) 2.3 Starting current (A) 7.5 B/down torque (Nm) 3.0 Moment of inertia (Kgm�) 0.15 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 2650.00 January 30, 2010 ]]>

30kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

30kW 4-pole (1465rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 200L Specification: Output (kW) 30 Frame size 200L Speed (rpm) 1465 Rated current 400V (A) 55 Power factor (cosφ) 0.86 Efficiency (%) 91.8 Rated torque (Nm) 196 Starting torque (Nm) 2.6 Starting current (A) 7.4 B/down torque (Nm) 3.2 Moment of inertia (Kgm�) 0.24 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 3244.00 January 30, 2010 ]]>

37kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

37kW 4-pole (1475rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 225S Specification: Output (kW) 37 Frame size 225S Speed (rpm) 1475 Rated current 400V (A) 67 Power factor (cosφ) 0.86 Efficiency (%) 93 Rated torque (Nm) 240 Starting torque (Nm) 2.5 Starting current (A) 7 B/down torque (Nm) 3.1 Moment of inertia (Kgm�) 0.44 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 3848.00 January 30, 2010 ]]>

45kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

45kW 4-pole (1475rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 225M Specification: Output (kW) 45 Frame size 225M Speed (rpm) 1475 Rated current 400V (A) 80 Power factor (cosφ) 0.87 Efficiency (%) 93.4 Rated torque (Nm) 292 Starting torque (Nm) 2.6 Starting current (A) 7 B/down torque (Nm) 3.2 Moment of inertia (Kgm�) 0.52 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 4463.00 January 30, 2010 ]]>

55kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

55kW 4-pole (1480rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 250M Specification: Output (kW) 55 Frame size 250M Speed (rpm) 1480 Rated current 400V (A) 97 Power factor (cosφ) 0.87 Efficiency (%) 94 Rated torque (Nm) 355 Starting torque (Nm) 2.6 Starting current (A) 6.7 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 0.79 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 5851.00 January 30, 2010 ]]>

75kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

75kW 4-pole (1485rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 280S Specification: Output (kW) 75 Frame size 280S Speed (rpm) 1485 Rated current 400V (A) 132 Power factor (cosφ) 0.86 Efficiency (%) 94.7 Rated torque (Nm) 482 Starting torque (Nm) 2.5 Starting current (A) 6.7 B/down torque (Nm) 2.7 Moment of inertia (Kgm�) 1.4 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 7696.00 January 30, 2010 ]]>

90kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

90kW 4-pole (1485rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 280M Specification: Output (kW) 90 Frame size 280M Speed (rpm) 1485 Rated current 400V (A) 160 Power factor (cosφ) 0.86 Efficiency (%) 95 Rated torque (Nm) 579 Starting torque (Nm) 2.5 Starting current (A) 6.8 B/down torque (Nm) 2.8 Moment of inertia (Kgm�) 1.6 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 9816.00 January 30, 2010 ]]>

110kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

110kW 4-pole (1486rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 315S Specification: Output (kW) 110 Frame size 315S Speed (rpm) 1486 Rated current 400V (A) 194 Power factor (cosφ) 0.86 Efficiency (%) 94.8 Rated torque (Nm) 707 Starting torque (Nm) 2.5 Starting current (A) 6.7 B/down torque (Nm) 2.7 Moment of inertia (Kgm�) 2.2 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 11448.00 January 30, 2010 ]]>

132kW 4-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

132kW 4-pole (1486rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 315M Specification: Output (kW) 132 Frame size 315M Speed (rpm) 1486 Rated current 400V (A) 232 Power factor (cosφ) 0.86 Efficiency (%) 95.5 Rated torque (Nm) 848 Starting torque (Nm) 2.7 Starting current (A) 7.2 B/down torque (Nm) 3 Moment of inertia (Kgm�) 2.7 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 13356.00 January 30, 2010 ]]>

0.25kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.25kW 6-pole (870rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 71M Specification: Output (kW) 0.25 Frame size 71M Speed (rpm) 870 Rated current 400V (A) 0.82 Power factor (cosφ) 0.70 Efficiency (%) 63 Rated torque (Nm) 2.7 Starting torque (Nm) 2.2 Starting current (A) 3.1 B/down torque (Nm) 2.2 Moment of inertia (Kgm�) 0.0009 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 410.00 January 30, 2010 ]]>

0.37kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.37kW 6-pole (910rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 80M Specification: Output (kW) 0.37 Frame size 80M Speed (rpm) 910 Rated current 400V (A) 1.18 Power factor (cosφ) 0.71 Efficiency (%) 64 Rated torque (Nm) 3.9 Starting torque (Nm) 1.9 Starting current (A) 3.3 B/down torque (Nm) 2.0 Moment of inertia (Kgm�) 0.0015 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 451.00 January 30, 2010 ]]>

0.55kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.55kW 6-pole (900rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 80M Specification: Output (kW) 0.55 Frame size 80M Speed (rpm) 900 Rated current 400V (A) 1.67 Power factor (cosφ) 0.74 Efficiency (%) 64 Rated torque (Nm) 5.8 Starting torque (Nm) 2.0 Starting current (A) 3.5 B/down torque (Nm) 2.1 Moment of inertia (Kgm�) 0.0018 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 481.00 January 30, 2010 ]]>

0.75kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.75kW 6-pole (910rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 90L Specification: Output (kW) 0.75 Frame size 90L Speed (rpm) 910 Rated current 400V (A) 2.1 Power factor (cosφ) 0.76 Efficiency (%) 69 Rated torque (Nm) 8.0 Starting torque (Nm) 2.2 Starting current (A) 3.9 B/down torque (Nm) 2.3 Moment of inertia (Kgm�) 0.0028 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 535.00 January 30, 2010 ]]>

1.1kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

1.1kW 6-pole (905rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 90L Specification: Output (kW) 1.1 Frame size 90L Speed (rpm) 905 Rated current 400V (A) 2.95 Power factor (cosφ) 0.75 Efficiency (%) 72 Rated torque (Nm) 12 Starting torque (Nm) 2.4 Starting current (A) 4.3 B/down torque (Nm) 2.4 Moment of inertia (Kgm�) 0.0035 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 591.00 January 30, 2010 ]]>

1.5kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

1.5kW 6-pole (930rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 100L Specification: Output (kW) 1.5 Frame size 100L Speed (rpm) 930 Rated current 400V (A) 4.0 Power factor (cosφ) 0.75 Efficiency (%) 72 Rated torque (Nm) 15 Starting torque (Nm) 2.0 Starting current (A) 4.5 B/down torque (Nm) 2.1 Moment of inertia (Kgm�) 0.0063 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 647.00 January 30, 2010 ]]>

2.2kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

2.2kW 6-pole (945rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 112M Specification: Output (kW) 2.2 Frame size 112M Speed (rpm) 945 Rated current 400V (A) 5.5 Power factor (cosφ) 0.76 Efficiency (%) 76 Rated torque (Nm) 22 Starting torque (Nm) 2.2 Starting current (A) 4.8 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 0.011 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 893.00 January 30, 2010 ]]>

3kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

3kW 6-pole (945rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 132S Specification: Output (kW) 3 Frame size 132S Speed (rpm) 945 Rated current 400V (A) 7.4 Power factor (cosφ) 0.75 Efficiency (%) 78 Rated torque (Nm) 30 Starting torque (Nm) 2.0 Starting current (A) 4.8 B/down torque (Nm) 2.2 Moment of inertia (Kgm�) 0.015 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1024.00 January 30, 2010 ]]>

4kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

4kW 6-pole (945rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 132M Specification: Output (kW) 4 Frame size 132M Speed (rpm) 945 Rated current 400V (A) 9.6 Power factor (cosφ) 0.76 Efficiency (%) 79 Rated torque (Nm) 40 Starting torque (Nm) 2.0 Starting current (A) 5.0 B/down torque (Nm) 2.4 Moment of inertia (Kgm�) 0.019 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1166.00 January 30, 2010 ]]>

5.5kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

5.5kW 6-pole (950rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 132M Specification: Output (kW) 5.5 Frame size 132M Speed (rpm) 950 Rated current 400V (A) 12.6 Power factor (cosφ) 0.76 Efficiency (%) 83 Rated torque (Nm) 55 Starting torque (Nm) 2.2 Starting current (A) 5.4 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 0.025 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1314.00 January 30, 2010 ]]>

7.5kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

7.5kW 6-pole (960rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 160M Specification: Output (kW) 7.5 Frame size 160M Speed (rpm) 960 Rated current 400V (A) 17.5 Power factor (cosφ) 0.72 Efficiency (%) 86 Rated torque (Nm) 75 Starting torque (Nm) 2.1 Starting current (A) 5.1 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 0.041 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1643.00 January 30, 2010 ]]>

11kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

11kW 6-pole (960rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 160L Specification: Output (kW) 11 Frame size 160L Speed (rpm) 960 Rated current 400V (A) 24.5 Power factor (cosφ) 0.74 Efficiency (%) 87 Rated torque (Nm) 109 Starting torque (Nm) 2.3 Starting current (A) 5.5 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 0.049 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 2120.00 January 30, 2010 ]]>

15kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

15kW 6-pole (970rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 180L Specification: Output (kW) 15 Frame size 180L Speed (rpm) 970 Rated current 400V (A) 29.5 Power factor (cosφ) 0.83 Efficiency (%) 89 Rated torque (Nm) 148 Starting torque (Nm) 2.6 Starting current (A) 6.3 B/down torque (Nm) 2.4 Moment of inertia (Kgm�) 0.20 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 2904.00 January 30, 2010 ]]>

18.5kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

18.5kW 6-pole (975rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 200L Specification: Output (kW) 18.5 Frame size 200L Speed (rpm) 975 Rated current 400V (A) 36 Power factor (cosφ) 0.82 Efficiency (%) 90.2 Rated torque (Nm) 181 Starting torque (Nm) 2.6 Starting current (A) 6.3 B/down torque (Nm) 2.3 Moment of inertia (Kgm�) 0.29 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 3456.00 January 30, 2010 ]]>

22kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

22kW 6-pole (975rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 200L Specification: Output (kW) 22 Frame size 200L Speed (rpm) 975 Rated current 400V (A) 42.5 Power factor (cosφ) 0.83 Efficiency (%) 90.8 Rated torque (Nm) 215 Starting torque (Nm) 2.5 Starting current (A) 5.7 B/down torque (Nm) 2.3 Moment of inertia (Kgm�) 0.33 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 4569.00 January 30, 2010 ]]>

30kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

30kW 6-pole (978rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 225M Specification: Output (kW) 30 Frame size 225M Speed (rpm) 978 Rated current 400V (A) 56 Power factor (cosφ) 0.84 Efficiency (%) 92 Rated torque (Nm) 293 Starting torque (Nm) 2.6 Starting current (A) 5.7 B/down torque (Nm) 2.2 Moment of inertia (Kgm�) 0.57 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 5448.00 January 30, 2010 ]]>

37kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

37kW 6-pole (980rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 250M Specification: Output (kW) 37 Frame size 250M Speed (rpm) 980 Rated current 400V (A) 69 Power factor (cosφ) 0.84 Efficiency (%) 92.4 Rated torque (Nm) 361 Starting torque (Nm) 2.6 Starting current (A) 6 B/down torque (Nm) 2.1 Moment of inertia (Kgm�) 0.89 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 6911.00 January 30, 2010 ]]>

45kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

45kW 6-pole (982rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 280S Specification: Output (kW) 45 Frame size 280S Speed (rpm) 982 Rated current 400V (A) 81 Power factor (cosφ) 0.86 Efficiency (%) 93 Rated torque (Nm) 438 Starting torque (Nm) 2.4 Starting current (A) 6 B/down torque (Nm) 2.3 Moment of inertia (Kgm�) 1.3 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 8363.00 January 30, 2010 ]]>

55kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

55kW 6-pole (984rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 280M Specification: Output (kW) 55 Frame size 280M Speed (rpm) 984 Rated current 400V (A) 99 Power factor (cosφ) 0.86 Efficiency (%) 93.6 Rated torque (Nm) 534 Starting torque (Nm) 2.5 Starting current (A) 6.2 B/down torque (Nm) 2.4 Moment of inertia (Kgm�) 1.5 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 10483.00 January 30, 2010 ]]>

75kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

75kW 6-pole (988rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 315S Specification: Output (kW) 75 Frame size 315S Speed (rpm) 988 Rated current 400V (A) 136 Power factor (cosφ) 0.85 Efficiency (%) 93.8 Rated torque (Nm) 725 Starting torque (Nm) 2.4 Starting current (A) 6.2 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 2.4 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 12720.00 January 30, 2010 ]]>

90kW 6-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

90kW 6-pole (988rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 315M Specification: Output (kW) 90 Frame size 315M Speed (rpm) 988 Rated current 400V (A) 162 Power factor (cosφ) 0.85 Efficiency (%) 94.2 Rated torque (Nm) 870 Starting torque (Nm) 2.4 Starting current (A) 6.2 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 2.9 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 14840.00 January 30, 2010 ]]>

Merlin 10 micron Sediment Filter -

Tue, 1 Dec 2009 12:51:14 +0000

10 micron sediment filter for Merlin Reverse Osmosis System GBP 13.00 January 30, 2010 ]]>

0.37kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.37kW 8-pole (655rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 90L Specification: Output (kW) 0.37 Frame size 90L Speed (rpm) 655 Rated current 400V (A) 1.16 Power factor (cosφ) 0.76 Efficiency (%) 61 Rated torque (Nm) 5.3 Starting torque (Nm) 1.4 Starting current (A) 2.8 B/down torque (Nm) 1.7 Moment of inertia (Kgm�) 0.0025 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 560.00 January 30, 2010 ]]>

0.55kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.55kW 8-pole (655rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 90L Specification: Output (kW) 0.55 Frame size 90L Speed (rpm) 655 Rated current 400V (A) 1.62 Power factor (cosφ) 0.76 Efficiency (%) 65 Rated torque (Nm) 7.9 Starting torque (Nm) 1.5 Starting current (A) 2.9 B/down torque (Nm) 1.7 Moment of inertia (Kgm�) 0.0035 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 620.00 January 30, 2010 ]]>

0.75kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

0.75kW 8-pole (665rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 100L Specification: Output (kW) 0.75 Frame size 100L Speed (rpm) 665 Rated current 400V (A) 2.15 Power factor (cosφ) 0.77 Efficiency (%) 65 Rated torque (Nm) 11 Starting torque (Nm) 1.6 Starting current (A) 3.5 B/down torque (Nm) 1.8 Moment of inertia (Kgm�) 0.0053 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 691.00 January 30, 2010 ]]>

1.1kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

1.1kW 8-pole (685rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 100L Specification: Output (kW) 1.1 Frame size 100L Speed (rpm) 685 Rated current 400V (A) 2.9 Power factor (cosφ) 0.74 Efficiency (%) 74 Rated torque (Nm) 16 Starting torque (Nm) 1.8 Starting current (A) 3.9 B/down torque (Nm) 2.0 Moment of inertia (Kgm�) 0.0070 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 792.00 January 30, 2010 ]]>

1.5kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

1.5kW 8-pole (700rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 112M Specification: Output (kW) 1.5 Frame size 112M Speed (rpm) 700 Rated current 400V (A) 4.0 Power factor (cosφ) 0.73 Efficiency (%) 74 Rated torque (Nm) 21 Starting torque (Nm) 1.8 Starting current (A) 4.4 B/down torque (Nm) 2.0 Moment of inertia (Kgm�) 0.013 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 925.00 January 30, 2010 ]]>

2.2kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

2.2kW 8-pole (695rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 132S Specification: Output (kW) 2.2 Frame size 132S Speed (rpm) 695 Rated current 400V (A) 6.0 Power factor (cosφ) 0.72 Efficiency (%) 74 Rated torque (Nm) 30 Starting torque (Nm) 1.7 Starting current (A) 4.2 B/down torque (Nm) 2.1 Moment of inertia (Kgm�) 0.014 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 230V Delta / 400V Star +/- 10% 3ph 50Hz 460V Star +/- 10% 3ph 60Hz GBP 1124.00 January 30, 2010 ]]>

3kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

3kW 8-pole (700rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 132M Specification: Output (kW) 3 Frame size 132M Speed (rpm) 700 Rated current 400V (A) 7.9 Power factor (cosφ) 0.72 Efficiency (%) 76 Rated torque (Nm) 40 Starting torque (Nm) 1.9 Starting current (A) 4.4 B/down torque (Nm) 2.2 Moment of inertia (Kgm�) 0.019 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1336.00 January 30, 2010 ]]>

4kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

4kW 8-pole (715rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 160M Specification: Output (kW) 4 Frame size 160M Speed (rpm) 715 Rated current 400V (A) 9.9 Power factor (cosφ) 0.72 Efficiency (%) 81 Rated torque (Nm) 54 Starting torque (Nm) 2.1 Starting current (A) 4.8 B/down torque (Nm) 2.3 Moment of inertia (Kgm�) 0.035 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1622.00 January 30, 2010 ]]>

5.5kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

5.5kW 8-pole (710rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 160M Specification: Output (kW) 5.5 Frame size 160M Speed (rpm) 710 Rated current 400V (A) 13.3 Power factor (cosφ) 0.72 Efficiency (%) 83 Rated torque (Nm) 74 Starting torque (Nm) 2.3 Starting current (A) 5.1 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 0.043 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 1866.00 January 30, 2010 ]]>

7.5kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

7.5kW 8-pole (715rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 160L Specification: Output (kW) 7.5 Frame size 160L Speed (rpm) 715 Rated current 400V (A) 17.9 Power factor (cosφ) 0.72 Efficiency (%) 84 Rated torque (Nm) 100 Starting torque (Nm) 2.6 Starting current (A) 5.8 B/down torque (Nm) 2.8 Moment of inertia (Kgm�) 0.062 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 2226.00 January 30, 2010 ]]>

11kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

11kW 8-pole (725rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 180L Specification: Output (kW) 11 Frame size 180L Speed (rpm) 725 Rated current 400V (A) 26 Power factor (cosφ) 0.70 Efficiency (%) 87 Rated torque (Nm) 145 Starting torque (Nm) 2.0 Starting current (A) 5.0 B/down torque (Nm) 2.2 Moment of inertia (Kgm�) 0.21 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 3010.00 January 30, 2010 ]]>

15kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

15kW 8-pole (725rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 200L Specification: Output (kW) 15 Frame size 200L Speed (rpm) 725 Rated current 400V (A) 32 Power factor (cosφ) 0.78 Efficiency (%) 87.5 Rated torque (Nm) 198 Starting torque (Nm) 2.1 Starting current (A) 5.0 B/down torque (Nm) 2.2 Moment of inertia (Kgm�) 0.37 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 3795.00 January 30, 2010 ]]>

18.5kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

18.5kW 8-pole (725rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 225S Specification: Output (kW) 18.5 Frame size 225S Speed (rpm) 725 Rated current 400V (A) 37.5 Power factor (cosφ) 0.8 Efficiency (%) 88.6 Rated torque (Nm) 244 Starting torque (Nm) 2.1 Starting current (A) 5 B/down torque (Nm) 2.2 Moment of inertia (Kgm�) 0.58 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 4463.00 January 30, 2010 ]]>

22kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

22kW 8-pole (725rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 225M Specification: Output (kW) 22 Frame size 225M Speed (rpm) 725 Rated current 400V (A) 43.5 Power factor (cosφ) 0.81 Efficiency (%) 90.1 Rated torque (Nm) 290 Starting torque (Nm) 2.1 Starting current (A) 5 B/down torque (Nm) 2.2 Moment of inertia (Kgm�) 0.66 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 5459.00 January 30, 2010 ]]>

30kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

30kW 8-pole (730rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 250M Specification: Output (kW) 30 Frame size 250M Speed (rpm) 730 Rated current 400V (A) 58 Power factor (cosφ) 0.81 Efficiency (%) 91.6 Rated torque (Nm) 392 Starting torque (Nm) 2.1 Starting current (A) 5 B/down torque (Nm) 2.1 Moment of inertia (Kgm�) 1.1 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 7028.00 January 30, 2010 ]]>

37kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

37kW 8-pole (732rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 280S Specification: Output (kW) 37 Frame size 280S Speed (rpm) 732 Rated current 400V (A) 70 Power factor (cosφ) 0.82 Efficiency (%) 92.7 Rated torque (Nm) 483 Starting torque (Nm) 2.2 Starting current (A) 5.5 B/down torque (Nm) 2.2 Moment of inertia (Kgm�) 1.4 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 8586.00 January 30, 2010 ]]>

45kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

45kW 8-pole (734rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 280M Specification: Output (kW) 45 Frame size 280M Speed (rpm) 734 Rated current 400V (A) 84 Power factor (cosφ) 0.83 Efficiency (%) 92.8 Rated torque (Nm) 585 Starting torque (Nm) 2.2 Starting current (A) 5.5 B/down torque (Nm) 2.2 Moment of inertia (Kgm�) 1.6 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 10589.00 January 30, 2010 ]]>

55kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

55kW 8-pole (738rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 315S Specification: Output (kW) 55 Frame size 315S Speed (rpm) 738 Rated current 400V (A) 104 Power factor (cosφ) 0.82 Efficiency (%) 93.1 Rated torque (Nm) 712 Starting torque (Nm) 2.2 Starting current (A) 6 B/down torque (Nm) 2.4 Moment of inertia (Kgm�) 2.3 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 12826.00 January 30, 2010 ]]>

75kW 8-pole Explosion protected motor (EExdeIICT4) -

Tue, 1 Dec 2009 12:51:14 +0000

75kW 8-pole (738rpm) Explosion protected motor ATEX certified II 2 G E Ex de IIC T4 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T4 temperature class) Click here for information about ATEX certification Frame size 315M Specification: Output (kW) 75 Frame size 315M Speed (rpm) 738 Rated current 400V (A) 140 Power factor (cosφ) 0.82 Efficiency (%) 93.6 Rated torque (Nm) 970 Starting torque (Nm) 2.3 Starting current (A) 6.2 B/down torque (Nm) 2.5 Moment of inertia (Kgm�) 3 Options: Foot mounted Flange or Foot & Flange mounted Voltages: 400V Delta / 690V Star +/- 10% 3ph 50Hz 460V Delta +/- 10% 3ph 60Hz GBP 15582.00 January 30, 2010 ]]>

3.05m Steel braided fuel dispensing hose 25mm bore -

Tue, 1 Dec 2009 12:51:14 +0000

Goodyear steel braided fuel dispensing hose - 3.05m (10ft) Tested and approved to EN1360 Suitable for use with biodiesel, diesel, petrol and alcohol blends 25mm nominal bore Complete with 1" BSP parallel zinc plated "swaged for life" end fittings DESCRIPTION Premium quality steel wire braid rubber hose for all types of dispensers. Its unique construction bonds the tube to the cover through the reinforcement. This provides a homogeneous wall to stop delamination and construction failure. Made to the highest production standards using laser technology and 100% proof testing as standard manufacturing procedure. Provides safety and durability for the toughest punishment of high volume self-service applications, where safety and strength are essential. BENEFITS The hardwall steel braid wire construction offers : Extra strength and durability Failsafe electrical conductivity Crush, kink and cut resistant Low volumetric expansion for accurate metering Nil delamination Complete assemblies, coupled and tested. PERFORMANCE Uses compounds with excellent resistance to diesel oils, reformulated petrol and alcohol blends. Biodiesel compatible APPROVAL Hose and assemblies meet the requirements of EN 1360 with branded hose and couplings. CONSTRUCTION TUBE: Chemigum� rubber (ORS) REINFORCEMENT: Steel wire braid COVER: Ozone resistant rubber TEMPERATURE: -25�C to +88�C MAX PRESSURE: 15.8 Bar (230psi) COLOUR: Black COUPLINGS: Goodyear specification mild steel zinc plated GBP 69.95 January 30, 2010 ]]>

3.66m Steel braided fuel dispensing hose 25mm bore -

Tue, 1 Dec 2009 12:51:14 +0000

Goodyear steel braided fuel dispensing hose - 3.66m (12ft) Tested and approved to EN1360 Suitable for use with biodiesel, diesel, petrol and alcohol blends 25mm nominal bore Complete with 1" BSP parallel zinc plated "swaged for life" end fittings DESCRIPTION Premium quality steel wire braid rubber hose for all types of dispensers. Its unique construction bonds the tube to the cover through the reinforcement. This provides a homogeneous wall to stop delamination and construction failure. Made to the highest production standards using laser technology and 100% proof testing as standard manufacturing procedure. Provides safety and durability for the toughest punishment of high volume self-service applications, where safety and strength are essential. BENEFITS The hardwall steel braid wire construction offers : Extra strength and durability Failsafe electrical conductivity Crush, kink and cut resistant Low volumetric expansion for accurate metering Nil delamination Complete assemblies, coupled and tested. PERFORMANCE Uses compounds with excellent resistance to diesel oils, reformulated petrol and alcohol blends. Biodiesel compatible APPROVAL Hose and assemblies meet the requirements of EN 1360 with branded hose and couplings. CONSTRUCTION TUBE: Chemigum� rubber (ORS) REINFORCEMENT: Steel wire braid COVER: Ozone resistant rubber TEMPERATURE: -25�C to +88�C MAX PRESSURE: 15.8 Bar (230psi) COLOUR: Black COUPLINGS: Goodyear specification mild steel zinc plated GBP 74.50 January 30, 2010 ]]>

4.57m Steel braided fuel dispensing hose 25mm bore -

Tue, 1 Dec 2009 12:51:14 +0000

Goodyear steel braided fuel dispensing hose - 4.57m (15ft) Tested and approved to EN1360 Suitable for use with biodiesel, diesel, petrol and alcohol blends 25mm nominal bore Complete with 1" BSP parallel zinc plated "swaged for life" end fittings DESCRIPTION Premium quality steel wire braid rubber hose for all types of dispensers. Its unique construction bonds the tube to the cover through the reinforcement. This provides a homogeneous wall to stop delamination and construction failure. Made to the highest production standards using laser technology and 100% proof testing as standard manufacturing procedure. Provides safety and durability for the toughest punishment of high volume self-service applications, where safety and strength are essential. BENEFITS The hardwall steel braid wire construction offers : Extra strength and durability Failsafe electrical conductivity Crush, kink and cut resistant Low volumetric expansion for accurate metering Nil delamination Complete assemblies, coupled and tested. PERFORMANCE Uses compounds with excellent resistance to diesel oils, reformulated petrol and alcohol blends. Biodiesel compatible APPROVAL Hose and assemblies meet the requirements of EN 1360 with branded hose and couplings. CONSTRUCTION TUBE: Chemigum� rubber (ORS) REINFORCEMENT: Steel wire braid COVER: Ozone resistant rubber TEMPERATURE: -25�C to +88�C MAX PRESSURE: 15.8 Bar (230psi) COLOUR: Black COUPLINGS: Goodyear specification mild steel zinc plated GBP 99.95 January 30, 2010 ]]>

6.1m Steel braided fuel dispensing hose 25mm bore -

Tue, 1 Dec 2009 12:51:14 +0000

Goodyear steel braided fuel dispensing hose - 6.1m (20ft) Tested and approved to EN1360 Suitable for use with biodiesel, diesel, petrol and alcohol blends 25mm nominal bore Complete with 1" BSP parallel zinc plated "swaged for life" end fittings DESCRIPTION Premium quality steel wire braid rubber hose for all types of dispensers. Its unique construction bonds the tube to the cover through the reinforcement. This provides a homogeneous wall to stop delamination and construction failure. Made to the highest production standards using laser technology and 100% proof testing as standard manufacturing procedure. Provides safety and durability for the toughest punishment of high volume self-service applications, where safety and strength are essential. BENEFITS The hardwall steel braid wire construction offers : Extra strength and durability Failsafe electrical conductivity Crush, kink and cut resistant Low volumetric expansion for accurate metering Nil delamination Complete assemblies, coupled and tested. PERFORMANCE Uses compounds with excellent resistance to diesel oils, reformulated petrol and alcohol blends. Biodiesel compatible APPROVAL Hose and assemblies meet the requirements of EN 1360 with branded hose and couplings. CONSTRUCTION TUBE: Chemigum� rubber (ORS) REINFORCEMENT: Steel wire braid COVER: Ozone resistant rubber TEMPERATURE: -25�C to +88�C MAX PRESSURE: 15.8 Bar (230psi) COLOUR: Black COUPLINGS: Goodyear specification mild steel zinc plated GBP 119.95 January 30, 2010 ]]>

7.62m Steel braided fuel dispensing hose 25mm bore -

Tue, 1 Dec 2009 12:51:14 +0000

Goodyear steel braided fuel dispensing hose - 7.62m (25ft) Tested and approved to EN1360 Suitable for use with biodiesel, diesel, petrol and alcohol blends 25mm nominal bore Complete with 1" BSP parallel zinc plated "swaged for life" end fittings DESCRIPTION Premium quality steel wire braid rubber hose for all types of dispensers. Its unique construction bonds the tube to the cover through the reinforcement. This provides a homogeneous wall to stop delamination and construction failure. Made to the highest production standards using laser technology and 100% proof testing as standard manufacturing procedure. Provides safety and durability for the toughest punishment of high volume self-service applications, where safety and strength are essential. BENEFITS The hardwall steel braid wire construction offers : Extra strength and durability Failsafe electrical conductivity Crush, kink and cut resistant Low volumetric expansion for accurate metering Nil delamination Complete assemblies, coupled and tested. PERFORMANCE Uses compounds with excellent resistance to diesel oils, reformulated petrol and alcohol blends. Biodiesel compatible APPROVAL Hose and assemblies meet the requirements of EN 1360 with branded hose and couplings. CONSTRUCTION TUBE: Chemigum� rubber (ORS) REINFORCEMENT: Steel wire braid COVER: Ozone resistant rubber TEMPERATURE: -25�C to +88�C MAX PRESSURE: 15.8 Bar (230psi) COLOUR: Black COUPLINGS: Goodyear specification mild steel zinc plated GBP 159.95 January 30, 2010 ]]>

Viton o-ring for PBH Housings -

Tue, 1 Dec 2009 12:51:14 +0000

Viton o-ring Fits PBH-410 and PBH-420 filter housings Excellent resistance to Biodiesel GBP 8.00 January 30, 2010 ]]>

ATEX certified automatic shut-off nozzle -

Tue, 1 Dec 2009 12:51:14 +0000

ATEX certified automatic shut-off nozzle High flow rate upto 80 litres / min Operating pressure 0.5-4 Bar Automatically shuts-off flow when tank is full 3 position stay open latch - can be disabled if required 1" BSPF swivel inlet, 1" outlet Suitable for biodiesel upto B100 Optional 1"M - 3/4"F aluminium reducing bush For use with electric pumps only Sira certified - Sira 01ATEX9065U GBP 99.95 January 30, 2010 ]]>

0.12kW 'EEx e' 3-phase motor [4-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

0.12kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size 63M Version available: 4-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 170.00 January 30, 2010 ]]>

0.25kW 'EEx e' 3-phase motor [2,4 & 6-pole] -

Tue, 1 Dec 2009 12:51:14 +0000

0.25kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Versions available: 2-pole - 63M frame 4-pole - 71M frame 6-pole - 71M frame Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 178.00 January 30, 2010 ]]>

0.37kW 'EEx e' 3-phase motor [2,4 & 6-pole] -

Tue, 1 Dec 2009 12:51:14 +0000

0.37kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Versions available: 2-pole - 71M frame 4-pole - 71M frame 6-pole - 80M frame Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 188.00 January 30, 2010 ]]>

0.55kW 'EEx e' 3-phase motor [2,4 & 6-pole] -

Tue, 1 Dec 2009 12:51:14 +0000

0.55kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Versions available: 2-pole - 71M frame 4-pole - 80M frame 6-pole - 80M frame Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 193.00 January 30, 2010 ]]>

0.75kW 'EEx e' 3-phase motor [2 & 4-pole] -

Tue, 1 Dec 2009 12:51:14 +0000

0.75kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 80M Versions available: 2-pole 4-pole Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 209.00 January 30, 2010 ]]>

0.65kW 'EEx e' 3-phase motor [6-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

0.65kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 90S Version available: 6-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 269.00 January 30, 2010 ]]>

0.95kW 'EEx e' 3-phase motor [6-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

0.95kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 90L Version available: 6-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 289.00 January 30, 2010 ]]>

1 kW 'EEx e' 3-phase motor [4-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

1kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 90S Version available: 4-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 242.00 January 30, 2010 ]]>

1.1kW 'EEx e' 3-phase motor [2-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

1.1kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 80M Version available: 2-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 222.00 January 30, 2010 ]]>

1.3kW 'EEx e' 3-phase motor [2 & 6-pole] -

Tue, 1 Dec 2009 12:51:14 +0000

1.3kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Versions available: 2-pole - 90S frame 6-pole - 100L frame Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 252.00 January 30, 2010 ]]>

1.35kW 'EEx e' 3-phase motor [4-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

1.35kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 90L Version available: 4-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 264.00 January 30, 2010 ]]>

1.85kW 'EEx e' 3-phase motor [2-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

1.85kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 90L Version available: 2-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 280.00 January 30, 2010 ]]>

1.9kW 'EEx e' 3-phase motor [6-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

1.9kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 112M Version available: 6-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 392.00 January 30, 2010 ]]>

2kW 'EEx e' 3-phase motor [4-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

2kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 100L Version available: 4-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 311.00 January 30, 2010 ]]>

2.5kW 'EEx e' 3-phase motor [2 & 4-pole] -

Tue, 1 Dec 2009 12:51:14 +0000

2.5kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 100L Versions available: 2-pole 4-pole Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 328.00 January 30, 2010 ]]>

2.6kW 'EEx e' 3-phase motor [6-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

2.6kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 132S Version available: 6-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 523.00 January 30, 2010 ]]>

3.3kW 'EEx e' 3-phase motor [2-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

3.3kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 112M Version available: 2-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 382.00 January 30, 2010 ]]>

Digital tank level meter -

Tue, 1 Dec 2009 12:51:14 +0000

Piusi OCIO Electronic Tank Level Indicator OCIO is an innovative system for monitoring the fluid level inside atmospheric tanks. The system detects the static pressure generated by the fluid height by means of a tube inserted in the tank and displays the fluid level or volume. The new design and suitable solutions guarantee a reliable and repeated level indication. Continuous metering High accuracy: +/- 1% Weather-proof unit to IP55 - suitable for outside monitoring Maximum and minimum level alarms Compatible with a wide range of fluids including Diesel and Biodiesels upto B100 as well as Petroleum (Gasolene), Kerosene, Oils upto SAE 250, Urea and Water System comprises: Pipe and sensor for detecting the hydrostatic pressure. The tube with its end is inserted from the top of the tank down to the bottom of the tank Control Unit for level display and system management. The unit is provided with intuitive and complete software and allows the connection of two alarm or lock devices Easy to set up and calibrate on site with tank type and dimensions.By means of the software it is possible to: Set the type and the dimensions of the tank Define the level alarms Define the level indication Define the unit of measurement Calibrate the instrument Depending on the set alarm levels, the control unit activates or deactivates the contact working as a remote switch starting the alarm devices or cutting the power supply off the connected equipment. Level indication as: Height (e.g. mm / inches) Volume (e.g. Litres / Gallons) Filling percentage (%) RS output for PC connection also available with additional PC software. GSM transmission version is also available for remote management systems (Further details available on request) Technical Information Stanard supply voltage - 230V / 50Hz - 110V / 60Hz version available. (Max tension 250VAC at 5 Amps or 30VDC at 5 Amps) Ingress protection - IP55 Suitable for tanks up to 4m high (12 feet) Accuracy +/- 1% full scale Stanard probe length 10m (10.6 yards)- extendible upto 50m (52 yards) Contacts for maximum and minimum level Click here for technical PDF GBP 299.00 January 30, 2010 ]]>

3.5kW 'EEx e' 3-phase motor [6-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

3.5kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 132M Version available: 6-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 548.00 January 30, 2010 ]]>

3.6kW 'EEx e' 3-phase motor [4-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

3.6kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 112M Version available: 4-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 399.00 January 30, 2010 ]]>

4.6kW 'EEx e' 3-phase motor [2-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

4.6kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 132S Version available: 2-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 480.00 January 30, 2010 ]]>

4.8kW 'EEx e' 3-phase motor [6-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

4.8kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 132M Version available: 6-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 633.00 January 30, 2010 ]]>

5kW 'EEx e' 3-phase motor [4-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

5kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 132S Version available: 4-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 491.00 January 30, 2010 ]]>

5.5kW 'EEx e' 3-phase motor [2-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

5.5kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 132S Version available: 2-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 506.00 January 30, 2010 ]]>

6.5kW 'EEx e' 3-phase motor [2-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

6.5kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 132S Version available: 2-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 532.00 January 30, 2010 ]]>

6.6kW 'EEx e' 3-phase motor [6-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

6.6kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 160M Version available: 6-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 794.00 January 30, 2010 ]]>

6.8kW 'EEx e' 3-phase motor [4-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

6.8kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 132M Version available: 4-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 571.00 January 30, 2010 ]]>

7.5kW 'EEx e' 3-phase motor [2-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

7.5kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 160M Version available: 2-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 775.00 January 30, 2010 ]]>

9.7kW 'EEx e' 3-phase motor [6-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

9.7kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 160L Version available: 6-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 988.00 January 30, 2010 ]]>

10kW 'EEx e' 3-phase motor [2 & 4-pole] -

Tue, 1 Dec 2009 12:51:14 +0000

10kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 160M Versions available: 2-pole 4-pole Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 870.00 January 30, 2010 ]]>

12.5kW 'EEx e' 3-phase motor [2-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

12.5kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 160L Version available: 2-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 1035.00 January 30, 2010 ]]>

13.5kW 'EEx e' 3-phase motor [4-pole only] -

Tue, 1 Dec 2009 12:51:14 +0000

13.5kW Increased safety ATEX certified EEx e 3-phase motor ATEX certified II 2 G E Ex e II T3 to EN 50014 & EN 50019 (Approved for use in Zone 1 & Zone 2 Ex gas environments upto T3 temperature class) Click here for information about ATEX certification Frame size: 160L Version available: 4-pole only Click here for basic technical details Options: Foot mounted Flange or Foot & Flange mounted GBP 909.00 January 30, 2010 ]]>

Wintron XC30 - 25 litre drum -

Tue, 1 Dec 2009 12:51:14 +0000

Cold flow additive / pour point depressant (PPD) specifically for biodieselSuitable for most types of biodiesel (B100) and biodiesel blends (B5, B20 etc.)Treat rate is typically 0.2% - 1.5% by volume, although this varies and is dependent on the type of biodiesel. Please e-mail:wintron@biofuelsystems.com for further information GBP 129.00 January 30, 2010 ]]>

Wintron XC30 - 200 litres [Export only - not for UK use] -

Tue, 1 Dec 2009 12:51:14 +0000

STN4 - 0.12kW PVDF magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

STN 4 - PVDF magnetic drive chemical pump - 0.12kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Construction: PVDF casing and impeller with Viton o-ring Max flow: 72 l/min (4.3m3/hr) Max head: 6m 1" inlet / 0.5" outlet Max temp: 80�C Max viscosity: 200cSt Max permissible solids: 2% by weight, 150micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes *Sodium Hydroxide to 20% Yes to 80oC *Sodium Hydroxide > 20% No *Sulphuric Acid Yes to 40oC (Greater at reduced %) Acetic Acid Yes to 50oc (Greater at reduced %) Propan-2-ol max 60oC Tetrahydrofuran (THF) No Hydrochloric Acid Yes Citric Acid Yes Phosphoric Acid Yes * Sulphuric acid at 98% may have a moderate effect of PVDF. Sodium hydroxide above 20% & hot sodium hydroxide will have an adverse effect on PVDF Click here for performance curve Options : 240V 50Hz Single phase motor 415V 50Hz Three phase motor GBP 389.00 January 30, 2010 ]]>

STN6 - 0.25kW PVDF magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

STN 6 - PVDF magnetic drive chemical pump - 0.25kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Construction: PVDF casing and impeller with Viton o-ring Max flow: 120 l/min (7.2m3/hr) Max head: 8.5m 1" inlet / 0.75" outlet Max temp: 80�C Max viscosity: 200cSt Max permissible solids: 2% by weight, 150micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes *Sodium Hydroxide to 20% Yes to 80oC *Sodium Hydroxide > 20% No *Sulphuric Acid Yes to 40oC (Greater at reduced %) Acetic Acid Yes to 50oc (Greater at reduced %) Propan-2-ol max 60oC Tetrahydrofuran (THF) No Hydrochloric Acid Yes Citric Acid Yes Phosphoric Acid Yes * Sulphuric acid at 98% may have a moderate effect of PVDF. Sodium hydroxide above 20% & hot sodium hydroxide will have an adverse effect on PVDF Click here for performance curve Options : 240V 50Hz Single phase motor 415V 50Hz Three phase motor Flanges at inlet / outlet ports GBP 489.00 January 30, 2010 ]]>

STN10 - 0.55kW PVDF magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

STN 10 - PVDF magnetic drive chemical pump - 0.55kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Construction: PVDF casing and impeller with Viton o-ring Max flow: 216 l/min (13m3/hr) Max head: 12.5m 1" inlet / 1" outlet Max temp: 80�C Max viscosity: 200cSt Max permissible solids: 2% by weight, 150micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes *Sodium Hydroxide to 20% Yes to 80oC *Sodium Hydroxide > 20% No *Sulphuric Acid Yes to 40oC (Greater at reduced %) Acetic Acid Yes to 50oc (Greater at reduced %) Propan-2-ol max 60oC Tetrahydrofuran (THF) No Hydrochloric Acid Yes Citric Acid Yes Phosphoric Acid Yes * Sulphuric acid at 98% may have a moderate effect of PVDF. Sodium hydroxide above 20% & hot sodium hydroxide will have an adverse effect on PVDF Click here for performance curve Options : 240V 50Hz Single phase motor 415V 50Hz Three phase motor Flanges at inlet / outlet ports GBP 589.00 January 30, 2010 ]]>

STN30 - 1.5kW ETFE magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

STN 30 - ETFE magnetic drive chemical pump - 1.5kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 266 l/min (16m3/hr) Max head: 24m 2" inlet / 1" outlet Max temp: 80�C Max viscosity: 400cSt Max permissible solids: 2% by weight, 150micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% No Sulphuric Acid Yes Acetic Acid Yes Propan-2-ol Yes Tetrahydrofuran (THF) Yes Hydrochloric Acid Yes Citric Acid Yes Phosphoric Acid Yes Click here for performance curve Options : 240V 50Hz Single phase motor 415V 50Hz Three phase motor 415V 50Hz Three phase ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) Flanges at inlet / outlet ports GBP 1095.00 January 30, 2010 ]]>

STN40 - 3kW ETFE magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

STN 40 - ETFE magnetic drive chemical pump - 3kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 616 l/min (37m3/hr) Max head: 25m 2" inlet / 1.5" outlet Max temp: 80�C Max viscosity: 400cSt Max permissible solids: 2% by weight, 150micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% No Sulphuric Acid Yes Acetic Acid Yes Propan-2-ol Yes Tetrahydrofuran (THF) Yes Hydrochloric Acid Yes Citric Acid Yes Phosphoric Acid Yes Click here for performance curve Options : 415V 50Hz Three phase motor 415V 50Hz Three phase ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) Flanges at inlet / outlet ports GBP 1395.00 January 30, 2010 ]]>

ETN60 - 5.5kW ETFE magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

ETN 60 - ETFE magnetic drive chemical pump - 5.5kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 633 l/min (38m3/hr) Max head: 34m 65mm inlet / 40mm outlet Inlet and outlet to UNI 2223/29 PN 16 ANSI B16.5 150 RF flanges Max temp: 80�C Max viscosity: 400cSt Max permissible solids: 2% by weight, 150micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% No Sulphuric Acid Yes Acetic Acid Yes Propan-2-ol Yes Tetrahydrofuran (THF) Yes Hydrochloric Acid Yes Citric Acid Yes Phosphoric Acid Yes Click here for performance curve Available options: ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) GBP 2890.00 January 30, 2010 ]]>

ETS40 - 2.2kW 316 s/s magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

ETS 40 - 316 stainless steel magnetic drive chemical pump - 2.2kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 500 l/min (30m3/hr) Max head: 22m 40mm inlet 32mm outlet Max temp: 140�C Max viscosity: 450cSt Max permissible solids: 5% by weight, 200micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% Yes *Sulphuric Acid Yes Acetic Acid No Propan-2-ol Yes Tetrahydrofuran (THF) Yes to 25�C Hydrochloric Acid No Citric Acid Yes Phosphoric Acid No * Sulphuric acid at 98% may have a moderate effect of stainless steel. Sulphuric acid below 90% will have an adverse effect on stainless steel. Click here for performance curve Options : 240V 50Hz Single phase motor 415V 50Hz Three phase motor 415V 50Hz Three phase ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) Flanges at inlet / outlet ports GBP 2075.00 January 30, 2010 ]]>

Aquacon - water adsorbing filtration system -

Tue, 1 Dec 2009 12:51:14 +0000

Aquacon water adsorbing filtration system Removes free and emulsified water, typically to less than 50ppm Particulate filtration to 25 micron nominal Max flow rate of approximately 210 litres / min Complete system includes: VF61 filter housing - Stainless steel housing, Viton o-ring, die cast Aluminium alloy head - 1.25" BSP inlet & outlet - *Differential pressure guage - pressure increase signals need for cartridge change - *Drain valve 2 x Aquacon AD-61425 filter cartridges * Not shown in image above Installation: We recommend mechanical separation of water, and filtration to 1 micron before Aquacon filter is used - When fuel is loaded with water or dirt significantly reduced flow can occur and filters will need replacing more frequently USE BEFORE ADDITION OF ANY COLD FLOW ADDITIVES Description: Patented Aquacon Filter Cartridges were designed for use with aviation fuels, and have a unique high-capacity inner filter media which removes free and emulsified water from hydrocarbon fuels typically to less than 50 ppm in the effluent. Absorbed water is chemically locked into the media. When a cartridge reaches its water holding capacity, its accordion pleats swell and causes an increase in the differential pressure which signals the operator to change the cartridge. Solid contaminants are removed by the cartridges particulate filter media layers. The pleated accordion style design provides a large surface area for maximum dirt holding capacity. Performance is not affected by the presence of common surfactants. GBP 649.00 January 30, 2010 ]]>

Aquacon water adsorbing filter cartridge -

Tue, 1 Dec 2009 12:51:14 +0000

Aquacon filter cartridge Free and emulsified water removal, typically to less than 50 ppm 25 micron particulate removal Pressure increase signals cartridge change Patented Aquacon Filter Cartridges were designed for use with aviation fuels, and have a unique high-capacity inner filter media which removes free and emulsified water from hydrocarbon fuels typically to less than 50 ppm in the effluent. Absorbed water is chemically locked into the media. When a cartridge reaches its water holding capacity, its accordion pleats swell and causes an increase in the differential pressure which signals the operator to change the cartridge. Solid contaminants are removed by the cartridges particulate filter media layers. The pleated accordion style design provides a large surface area for maximum dirt holding capacity. Performance is not affected by the presence of common surfactants. GBP 61.95 January 30, 2010 ]]>

ETS30 - 1.5kW 316 s/s magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

ETS 30 - 316 stainless steel magnetic drive chemical pump - 1.5kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 216 l/min (30m3/hr) Max head: 21m 32mm inlet 25mm outlet Max temp: 140�C Max viscosity: 450cSt Max permissible solids: 5% by weight, 200micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% Yes *Sulphuric Acid Yes Acetic Acid No Propan-2-ol Yes Tetrahydrofuran (THF) Yes to 25�C Hydrochloric Acid No Citric Acid Yes Phosphoric Acid No * Sulphuric acid at 98% may have a moderate effect of stainless steel. Sulphuric acid below 90% will have an adverse effect on stainless steel. Click here for performance curve Options : 240V 50Hz Single phase motor 415V 50Hz Three phase motor 415V 50Hz Three phase ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) Flanges at inlet / outlet ports GBP 1949.00 January 30, 2010 ]]>

ETN50 - 2.2kW ETFE magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

ETN 50 - ETFE magnetic drive chemical pump - 2.2kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 300 l/min (18m3/hr) Max head: 33m 40mm inlet / 25mm outlet Inlet and outlet to UNI 2223/29 PN 16 ANSI B16.5 150 RF flanges Max temp: 80�C Max viscosity: 400cSt Max permissible solids: 2% by weight, 150micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% No Sulphuric Acid Yes Acetic Acid Yes Propan-2-ol Yes Tetrahydrofuran (THF) Yes Hydrochloric Acid Yes Citric Acid Yes Phosphoric Acid Yes Click here for performance curve Available options: 240V 50Hz Single phase motor 415V 50Hz Three phase motor 415V 50Hz Three phase ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) GBP 2495.00 January 30, 2010 ]]>

ETN70 - 7.5kW ETFE magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

ETN 70 - ETFE magnetic drive chemical pump - 7.5kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 1165 l/min (70m3/hr) Max head: 29.5m 80mm inlet / 50mm outlet Inlet and outlet to UNI 2223/29 PN 16 ANSI B16.5 150 RF flanges Max temp: 80�C Max viscosity: 400cSt Max permissible solids: 2% by weight, 150micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% No Sulphuric Acid Yes Acetic Acid Yes Propan-2-ol Yes Tetrahydrofuran (THF) Yes Hydrochloric Acid Yes Citric Acid Yes Phosphoric Acid Yes Click here for performance curve Available options: ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) GBP 3799.00 January 30, 2010 ]]>

ETS50 - 4kW 316 s/s magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

ETS 50 - 316 stainless steel magnetic drive chemical pump - 4kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 283 l/min (17m3/hr) Max head: 38m 40mm inlet 25mm outlet Max temp: 140�C Max viscosity: 450cSt Max permissible solids: 5% by weight, 200micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% Yes *Sulphuric Acid Yes Acetic Acid No Propan-2-ol Yes Tetrahydrofuran (THF) Yes to 25�C Hydrochloric Acid No Citric Acid Yes Phosphoric Acid No * Sulphuric acid at 98% may have a moderate effect of stainless steel. Sulphuric acid below 90% will have an adverse effect on stainless steel. Click here for performance curve Options : ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) GBP 2925.00 January 30, 2010 ]]>

ETS60 - 7.5kW 316 s/s magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

ETS 60 - 316 stainless steel magnetic drive chemical pump - 7.5kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 366 l/min (22m3/hr) Max head: 67m 40mm inlet 25mm outlet Max temp: 140�C Max viscosity: 450cSt Max permissible solids: 5% by weight, 200micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% Yes *Sulphuric Acid Yes Acetic Acid No Propan-2-ol Yes Tetrahydrofuran (THF) Yes to 25�C Hydrochloric Acid No Citric Acid Yes Phosphoric Acid No * Sulphuric acid at 98% may have a moderate effect of stainless steel. Sulphuric acid below 90% will have an adverse effect on stainless steel. Click here for performance curve Options : ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) GBP 3350.00 January 30, 2010 ]]>

ETS70 - 5.5kW 316 s/s magnetic drive pump -

Tue, 1 Dec 2009 12:51:14 +0000

ETS 70 - 316 stainless steel magnetic drive chemical pump - 5.5kW 2-pole motor Designed for the safe effective handling of corrosive and toxic liquids. Magnetic drive pumps eliminate leakage of hazardous or corrosive chemicals - making the units a very safe option for both operators and the environment. Max flow: 450l/min (27m3/hr) Max head: 40m 50mm inlet 32mm outlet Max temp: 140�C Max viscosity: 450cSt Max permissible solids: 5% by weight, 200micron size, 800Vk hardness IP55 rated Compatibility with chemicals encountered during biodiesel process: Chemical Compatibilty Biodiesel Yes Methanol Yes Ethanol Yes Sodium Hydroxide to 20% Yes Sodium Hydroxide > 20% Yes *Sulphuric Acid Yes Acetic Acid No Propan-2-ol Yes Tetrahydrofuran (THF) Yes to 25�C Hydrochloric Acid No Citric Acid Yes Phosphoric Acid No * Sulphuric acid at 98% may have a moderate effect of stainless steel. Sulphuric acid below 90% will have an adverse effect on stainless steel. Click here for performance curve Options : ATEX certified version (Ex gases, Zone 1, upto T3 temperature class) GBP 3049.00 January 30, 2010 ]]>

0.75kW 316 s/s Centrifugal Chemical Pump -

Tue, 1 Dec 2009 12:51:14 +0000

0.75kW 316 stainless steel Chemical pump with Viton (FKM) seals Open impeller centrifugal pump manufactured from stainless steel AISI 316L.Electro-polished surfaces with high finish and high mechanical strength. These pumps are very simple to maintain having only a small number of components (only 19 parts) most of which can be expected to last a life-time. Standard ports - 1.5" BSPM inlet 1" BSPM outlet Rated performance: Qmax - 26m3/hr (430 l/min) / Hmax 13m / Max pressure 1.3 Bar Technical data / limits Max temp 90�C Max viscosity ~200 cSt Max particle size 6mm Standard version: 3-phase 0.75kW 2-pole IP55 motor Options available Single-phase Explosion protected version available - ATEX certified (Zone 1 - E Ex d - max temperature class T4 : ATEX marking Ex II EEx d IIB T4 T3) Other versions available on request: US versions - NEMA spec UL : 3-phase / 60 Hz motors - 220V & 480V. Ex Zone 1 Hazard area version also available SMS thread or flanges at inlet & outlet ports Click here for performance curve (based on water @ 20�C) GBP 519.00 January 30, 2010 ]]>

2kW 316 s/s Centrifugal Chemical Pump -

Tue, 1 Dec 2009 12:51:14 +0000

2kW 316 stainless steel Chemical pump with Viton (FKM) seals Open impeller centrifugal pump manufactured from stainless steel AISI 316L.Electro-polished surfaces with high finish and high mechanical strength. These pumps are very simple to maintain having only a small number of components (only 19 parts) most of which can be expected to last a life-time. Standard ports - 1.5" BSPM inlet 1.5" BSPM outlet Rated performance: Qmax - 39m3/hr (650 l/min) / Hmax 24m / Max pressure 2.4 Bar Technical data / limits Max temp 90�C Max viscosity ~200 cSt Max particle size 6mm Standard version: 3-phase 2kW 2-pole IP55 motor Options available Explosion protected version - ATEX certified (Zone 1 - E Ex d - max temperature class T4 : ATEX marking Ex II EEx d IIB T4 T3) Other versions available on request: US versions - NEMA spec UL : 3-phase / 60 Hz motors - 220V & 480V. Ex Zone 1 Hazard area version also available SMS thread or flanges at inlet & outlet ports Click here for performance curve (based on water @ 20�C) GBP 799.00 January 30, 2010 ]]>

5.5kW 316 s/s Centrifugal Chemical Pump -

Tue, 1 Dec 2009 12:51:14 +0000

5.5kW 316 stainless steel Chemical pump with Viton (FKM) seals Open impeller centrifugal pump manufactured from stainless steel AISI 316L.Electro-polished surfaces with high finish and high mechanical strength. These pumps are very simple to maintain having only a small number of components (only 19 parts) most of which can be expected to last a life-time. Standard ports - 2" BSPM inlet 2" BSPM outlet Rated performance: Qmax - 48m3/hr (800 l/min) / Hmax 41m / Max pressure 4.1 Bar Technical data / limits Max temp 90�C Max viscosity ~200 cSt Max particle size 6mm Standard version: 3-phase 5.5kW 2-pole IP55 motor Options available Explosion protected version available - ATEX certified (Zone 1 - E Ex d - max temperature class T4 : ATEX marking Ex II EEx d IIB T4 T3) Other versions available on request: US versions - NEMA spec UL : 3-phase / 60 Hz motors - 220V & 480V. Ex Zone 1 Hazard area version also available SMS thread or flanges at inlet & outlet ports Click here for performance curve (based on water @ 20�C) GBP 1024.00 January 30, 2010 ]]>

Single hose commercial pump [volume display] -

Tue, 1 Dec 2009 12:51:14 +0000

UK National Weights & Measures approved commercial fuel pump Appropriate for use with pure biodiesel (B100) and all biodiesel / petro-diesel blends Fully approved for re-sale use, these commercial pumps offer the ultimate in quality commercial fuelling equipment. Built to an exceptionally high-standard, the pumps offer a new dimension in quality for the modern commercial truck-stop, where driver facilities and image are all important.With speed of fuelling and reliability being the major consideration these commercial pumps more than meet these needs. Using the latest electronics, coupled with world-beating hydraulics able to pump fuels fast and offer accurate, repeatable metering of fuel, the equipment is specifically designed to meet the heavy-duty needs of the truck-stop environment. Manufactured entirely out of solid stainless steel, with a wide range of interfaces to fuel monitoring and control systems the pump provide a robust and visually attractive range of fuelling equipment. Standard features All units are manufactured to EN13617 and approved by UK Weights & Measures for the re-sale of fuel either in attendant operated mode, or in conjunction with an automated payment / fuel monitoring system. Standard features which are part of our all inclusive package include: Solid stainless steel construction Styled head with superb 1" illuminated volume only displays both sides Integral nozzle locking (no padlocks required) Digitally displayed totaliser readings Hose break couplings Top quality hoses and automatic ZVA nozzles Choice of fuel monitoring interface (serial data, 100PPL or 10PPL) Pumping unit with integral air separation for use with underground storage tanks Commissioning and 12 months on-site warranty * (SEE IMPORTANT NOTE BELOW) Options Hose retiever or high-hose option Optional hand-held infra-red controlled management functions Matching stainless steel under pump plinths for sites without suitable pump islands Under pump cradles / stools for new installations Versions 45 LPM (SC11LC) 70 LPM (SC11MC) 90 LPM (SC11HC) IMPORTANT NOTE - Pirce includes mainland UK commissioning, but does not include installation. This product is supported by a 12 month warranty WHICH MUST BE INITIATED BY AN APPROVED COMMISSIONING COMPANY BEFORE THE PUMP IS USED FOR THE FIRST TIME - NO WARRANTY WILL BE PROVIDED ON EQUIPMENT WHICH HAS NOT BEEN PROPERLY COMMISSIONED Click here for more information about commissioning procedure GBP 2670.00 January 30, 2010 ]]>

Single hose retail pump [volume & price display] -

Tue, 1 Dec 2009 12:51:14 +0000

UK National Weights & Measures approved retail fuel pump Appropriate for use with pure biodiesel (B100) and all biodiesel / petro-diesel blends Fully approved for re-sale use, these retail pumps offer the ultimate in quality retail fuelling equipment where space is at a premium and the longer-term cost of ownership is of great importance. With reliability the number one requirement to any service station, these pumps are built to an unprecedented standard of quality. Using the latest electronics, coupled with world-beating hydraulics able to ensure accurate, repeatable and reliable dispensing of fuel time after time. In addition, the pumps are manufactured out of solid stainless steel, to give a finish to the equipment which is both visually attractive and provides a truly lasting appearance without corrosion. An affordable, financially sound solution to re-pumping when it pays to stand out from the crowd. Standard features All units are manufactured to EN13617 and approved by UK Weights & Measures for re-sale use in both attended and self-service operation. Standard features which are part of our all inclusive package: Solid stainless steel construction Styled head design with superb 1" illuminated cash & volume displays both sides Integral nozzle locking (no padlocks required) Infra-red controlled management functions with digitally displayed totaliser readings Built-in hose retriever or high-hose option with top quality hoses, hose break couplings and automatic ZVA nozzles Unique ground sealed base for ease of installation Pumping unit with integral air separation for use with underground storage tanks Instantly switchable to attendant operated from self-service mode in the event of control equipment failure Commissioning and 12 months on-site warranty * (SEE IMPORTANT NOTE BELOW) Options Hose retiever or high-hose option Matching stainless steel under pump plinths for sites without suitable pump islands Under pump cradles / stools for new installations Versions 45 LPM (SC11LR) 70 LPM (SC11MR) 90 LPM (SC11HR) IMPORTANT NOTE - Pirce includes mainland UK commissioning, but does not include installation. This product is supported by a 12 month warranty WHICH MUST BE INITIATED BY AN APPROVED COMMISSIONING COMPANY BEFORE THE PUMP IS USED FOR THE FIRST TIME - NO WARRANTY WILL BE PROVIDED ON EQUIPMENT WHICH HAS NOT BEEN PROPERLY COMMISSIONED Click here for more information about commissioning procedure GBP 2995.00 January 30, 2010 ]]>

Twin hose commercial pump [volume display] -

Tue, 1 Dec 2009 12:51:14 +0000

UK National Weights & Measures approved commercial fuel pump Appropriate for use with pure biodiesel (B100) and all biodiesel / petro-diesel blends Fully approved for re-sale use, these commercial pumps offer the ultimate in quality commercial fuelling equipment. Built to an exceptionally high-standard, the pumps offer a new dimension in quality for the modern commercial truck-stop, where driver facilities and image are all important.With speed of fuelling and reliability being the major consideration these commercial pumps more than meet these needs. Using the latest electronics, coupled with world-beating hydraulics able to pump fuels fast and offer accurate, repeatable metering of fuel, the equipment is specifically designed to meet the heavy-duty needs of the truck-stop environment. Manufactured entirely out of solid stainless steel, with a wide range of interfaces to fuel monitoring and control systems the pump provide a robust and visually attractive range of fuelling equipment. Standard features All units are manufactured to EN13617 and approved by UK Weights & Measures for the re-sale of fuel either in attendant operated mode, or in conjunction with an automated payment / fuel monitoring system. Standard features which are part of our all inclusive package include: Solid stainless steel construction Styled head with superb 1" illuminated volume only displays both sides Integral nozzle locking (no padlocks required) Digitally displayed totaliser readings Hose break couplings Top quality hoses and automatic ZVA nozzles Choice of fuel monitoring interface (serial data, 100PPL or 10PPL) Pumping unit with integral air separation for use with underground storage tanks Commissioning and 12 months on-site warranty * (SEE IMPORTANT NOTE BELOW) Options Hose retiever or high-hose option Optional hand-held infra-red controlled management functions Matching stainless steel under pump plinths for sites without suitable pump islands Under pump cradles / stools for new installations Versions 45 LPM (SC22LC) 70 LPM (SC22MC) 90 LPM (SC22HC) IMPORTANT NOTE - Pirce includes mainland UK commissioning, but does not include installation. This product is supported by a 12 month warranty WHICH MUST BE INITIATED BY AN APPROVED COMMISSIONING COMPANY BEFORE THE PUMP IS USED FOR THE FIRST TIME - NO WARRANTY WILL BE PROVIDED ON EQUIPMENT WHICH HAS NOT BEEN PROPERLY COMMISSIONED Click here for more information about commissioning procedure GBP 4550.00 January 30, 2010 ]]>

Twin hose retail pump [volume & price display] -

Tue, 1 Dec 2009 12:51:14 +0000

UK National Weights & Measures approved retail fuel pump Appropriate for use with pure biodiesel (B100) and all biodiesel / petro-diesel blends Fully approved for re-sale use, these retail pumps offer the ultimate in quality retail fuelling equipment where space is at a premium and the longer-term cost of ownership is of great importance. With reliability the number one requirement to any service station, these pumps are built to an unprecedented standard of quality. Using the latest electronics, coupled with world-beating hydraulics able to ensure accurate, repeatable and reliable dispensing of fuel time after time. In addition, the pumps are manufactured out of solid stainless steel, to give a finish to the equipment which is both visually attractive and provides a truly lasting appearance without corrosion. An affordable, financially sound solution to re-pumping when it pays to stand out from the crowd. Standard features All units are manufactured to EN13617 and approved by UK Weights & Measures for re-sale use in both attended and self-service operation. Standard features which are part of our all inclusive package: Solid stainless steel construction Styled head design with superb 1" illuminated cash & volume displays both sides Integral nozzle locking (no padlocks required) Infra-red controlled management functions with digitally displayed totaliser readings Built-in hose retriever or high-hose option with top quality hoses, hose break couplings and automatic ZVA nozzles Unique ground sealed base for ease of installation Pumping unit with integral air separation for use with underground storage tanks Instantly switchable to attendant operated from self-service mode in the event of control equipment failure Commissioning and 12 months on-site warranty * (SEE IMPORTANT NOTE BELOW) Options Hose retiever or high-hose option Matching stainless steel under pump plinths for sites without suitable pump islands Under pump cradles / stools for new installations Versions 45 LPM (SC22LR) 70 LPM (SC22MR) 90 LPM (SC22HR) IMPORTANT NOTE - Pirce includes mainland UK commissioning, but does not include installation. This product is supported by a 12 month warranty WHICH MUST BE INITIATED BY AN APPROVED COMMISSIONING COMPANY BEFORE THE PUMP IS USED FOR THE FIRST TIME - NO WARRANTY WILL BE PROVIDED ON EQUIPMENT WHICH HAS NOT BEEN PROPERLY COMMISSIONED Click here for more information about commissioning procedure GBP 4995.00 January 30, 2010 ]]>

Dow Corning 732 - Biodiesel resistant sealant- 310ml -

Tue, 1 Dec 2009 12:51:14 +0000

Dow Corning 732 - Biodiesel resistant silicone sealant General purpose silicone sealant / adhesive Click here for data sheet Disclaimer: It is the customer's responsibility to test this product and determine suitability before use. The information given here and on the product data sheet is offered in good faith and is believed to be accurate. No warranty is either expressed or implied. Conditions and methods of use of this and other products are beyond our control, and any information given should not be used as substitute for customer's testing to ensure that the products used are safe, effective and fully satisfactory for the intended end-use. GBP 10.75 January 30, 2010 ]]>

3A Zeolite molecular sieve - 2-5mm beads - 160Kg drum -

Tue, 1 Dec 2009 12:51:14 +0000

3A Zeolite molecular sieve Specially manufactured 3A Zeolite molecular sieve beads with excellent resistance to biodiesel and standard process chemicals. These synthetic beads have 3 Angstrom (0.3 nanometre) pores within their molecular structure. The pores are sufficiently large to accomodate water molecules, but too small to accomodate larger molecules such as methanol, ethanol and biodiesel. Will adsorb water from biodiesel, methanol and ethanol (as well as many other compounds) to desiccate to near absolute dryness. This Zeolite will hold 18% of its dry weight in water and can be regenerated - typically over 50 times. To regenerate the bed of zeolite beads it is thoroughly flushed with water and then heated to 450�C. THE ZEOLITE MUST NOT EXCEED 550�C AS THIS WILL DENATURE AND DESTROY THE PRODUCT. Once the entire zeolite bed reaches 450�C it is allowed to cool. Once it has returned to normal temperature it can be reused. Applications Drying biodiesel - After water washing and then mechanical separation of water from biodiesel, the fuel is often over 1000ppm water, and falls well outside acceptable specifications. By passing biodiesel through a 3A Zeolite bed at this stage, biodiesel can be effectively dried. Long contact times can desiccate the biodiesel to near absolute dryness, but even relatively short contact times can dry biodiesel to less than 200ppm Methanol recovery - methanol that has been recovered by evaporation will contain too much water to re-use. 3A Zeolite can be used to dry to near absolute dryness Production of anhydrous ethanol - even after multiple fractional distillation steps, ethanol is likely to contain too much water for acceptable use as a biofuel. 3A Zeolite can be used to dry to near absolute dryness Please note, other forms of Zeolite are available. We currently have large stocks of 4A Zeolite for specialist applications. GBP 349.00 January 30, 2010 ]]>

Merlin Flush Kit -

Tue, 1 Dec 2009 12:51:14 +0000

Flush kit for Merlin Reverse Osmosis System GBP 65.00 January 30, 2010 ]]>

H120 - High vacuum pneumatic vacuum pump -

Tue, 1 Dec 2009 12:51:14 +0000

PIAB - H120 - Pneumatic high vacuum pump High vacuum levels upto 100.8 -KPa Air operated Achieve high vacuum quickly & safely Supplied with Aluminum connection plate (earthing) and Viton sealings Click here for data sheet Click here for information regarding explosion protection and ATEX applicability GBP 574.00 January 30, 2010 ]]>

Spanner for PBH-410 filter housing -

Tue, 1 Dec 2009 12:51:14 +0000

Spanner for PBH-410 filter housing Facilitates separation of head from bowl - for easier changing of filter bags or servicing GBP 7.00 January 30, 2010 ]]>

Spanner for PBH-420 filter housing -

Tue, 1 Dec 2009 12:51:14 +0000

Spanner for PBH-420 filter housing Facilitates separation of head from bowl - for easier changing of filter bags or servicing GBP 7.00 January 30, 2010 ]]>

Goyum Mk I - 150-180Kg/hour Solar Type Screw Press -

Tue, 1 Dec 2009 12:51:14 +0000

Goyum Mk I Oil Press - Solar Type Screw Press CE approved Maintenance free Best quality oil & oil-cake Available ex-stock 150 - 180 Kg/hour capacity 5.6kW (7.5 HP) Geared motor Rugged all steel construction with cast steel chamber and hard faced screw Cake thickness can be adjusted on running machine Standard version is supplied with steam agitator cooker - alternative version with continuous flow gravity fed hopper available as special order at no extra cost. At present we only hold a small stock of oil presses. Other sizes are available - from 1 to 150 tonnes per 24 hour capacity - Please contact us for further information and price details. GBP 5450.00 January 30, 2010 ]]>

Cable gland with lock nut - Ex Zone 2 - M20 x 1.5 -

Tue, 1 Dec 2009 12:51:14 +0000

Ex Cable gland with lock nut - M20 x 1.5 - Seal range 5-13mm IP65 ATEX certified - Equipment Group II Category 3 (Zone 2 & 22) GBP 2.07 January 30, 2010 ]]>

Cable gland with lock nut - Ex Zone 2 - M25 x 1.5 -

Tue, 1 Dec 2009 12:51:14 +0000

Ex Cable gland with lock nut - M25 x 1.5 - Seal range 8-17mm IP65 ATEX certified - Equipment Group II Category 3 (Zone 2 & 22) GBP 2.40 January 30, 2010 ]]>

Cable gland with lock nut - Ex Zone 2 - M32 x 1.5 -

Tue, 1 Dec 2009 12:51:14 +0000

Ex Cable gland with lock nut - M32 x 1.5 - Seal range 12-21mm IP65 ATEX certified - Equipment Group II Category 3 (Zone 2 & 22) GBP 2.89 January 30, 2010 ]]>

Cable gland with lock nut - Ex Zone 2 - M40 x 1.5 -

Tue, 1 Dec 2009 12:51:14 +0000

Ex Cable gland with lock nut - M40 x 1.5 - Seal range 16-28mm IP65 ATEX certified - Equipment Group II Category 3 (Zone 2 & 22) GBP 5.97 January 30, 2010 ]]>

Cable gland with lock nut - Ex Zone 2 - M50 x 1.5 -

Tue, 1 Dec 2009 12:51:14 +0000

Ex Cable gland with lock nut - M50 x 1.5 - Seal range 21-35mm IP65 ATEX certified - Equipment Group II Category 3 (Zone 2 & 22) GBP 17.94 January 30, 2010 ]]>

Merlin Carbon Pre-filter -

Tue, 1 Dec 2009 12:51:14 +0000

Carbon pre-filter for Merlin Reverse Osmosis System GBP 19.00 January 30, 2010 ]]>

K600/3 High accuracy digital flow meter -

Tue, 1 Dec 2009 12:51:14 +0000

High accuracy digital flow meter Suitable for use with biodiesel, diesel and oil Offers high precision and low pressure losses together with a compact lightweight design and ease of installation. Very easy to use and calibrate. Accuracy +/- 0.5% in flow rate range after calibration Repeatibility 0.2% Pressure loss < 0.5 Bar (7 psi) at max flow rate Aluminium measuring chamber with oval gears made of acetalic resin Flow rate 10-100 l/min Max pressure 30 Bar 1" BSPF inlet & outlet ports with flanges Powered by 2 x AAA batteries Digital display with low battery indicator, 4-digit readout for subtotal and 6-digit for total dispensed volume Click here for dimensional drawing GBP 279.00 January 30, 2010 ]]>

Junction box - Ex Zone 2 - 93x93x55mm -

Tue, 1 Dec 2009 12:51:14 +0000

ATEX Certified Junction Box - Ex Zones 2 & 22 - 93 x 93 x 55mm Junction box according to E DIN IEC 60998-2-5 Explosion protection Zones 2 & 22 - ATEX certified II 3 G D E Ex nA Weather-proof IP65 Shock resistant Halogen free Ui = 400V Options: Standard box complete with 5-pole screw terminals 2.5 / 4.0 mm2 (4 x 1.5 mm2 / 4 x 2.5mm2 / 3 x 4mm2) Available as empty box - without terminals Important note: Must be used with appropriate Ex glands / fittings GBP 7.81 January 30, 2010 ]]>

Junction box - Ex Zone 2 - 110x110x67mm -

Tue, 1 Dec 2009 12:51:14 +0000

ATEX Certified Junction Box - Ex Zones 2 & 22 - 110 x 110 x 67mm Junction box according to E DIN IEC 60998-2-5 Explosion protection Zones 2 & 22 - ATEX certified II 3 G D E Ex nA Weather-proof IP65 Shock resistant Halogen free Ui = 400V Options: Standard box complete with 5-pole high position screw terminals - 6.0 mm2 (4 x 2.5 mm2 / 4 x 4mm2 / 3 x 6mm2) Available as empty box - without terminals Important note: Must be used with appropriate Ex glands / fittings GBP 10.73 January 30, 2010 ]]>

Junction box - Ex Zone 2 - 140x140x79mm -

Tue, 1 Dec 2009 12:51:14 +0000

ATEX Certified Junction Box - Ex Zones 2 & 22 - 140 x 140 x 79mm Junction box according to E DIN IEC 60998-2-5 Explosion protection Zones 2 & 22 - ATEX certified II 3 G D E Ex nA Weather-proof IP65 Shock resistant Halogen free Ui = 690V Options: Standard box complete with 5-pole high position screw terminals - 10 mm2 (4 x 4mm2 / 4 x 6mm2 / 4 x 10mm2) Available as empty box - without terminals Important note: Must be used with appropriate Ex glands / fittings GBP 15.00 January 30, 2010 ]]>

Junction box - Ex Zone 2 - 180x180x91mm -

Tue, 1 Dec 2009 12:51:14 +0000

ATEX Certified Junction Box - Ex Zones 2 & 22 - 180 x 180 x 91mm Junction box according to E DIN IEC 60998-2-5 Explosion protection Zones 2 & 22 - ATEX certified II 3 G D E Ex nA Weather-proof IP65 Shock resistant Halogen free Ui = 690V Options: Standard box complete with 5-pole high position screw terminals - 16 mm2 (4 x 6mm2 / 4 x 10mm2 / 4 x 16mm2) Available as empty box - without terminals Important note: Must be used with appropriate Ex glands / fittings GBP 24.60 January 30, 2010 ]]>

Junction box - Ex Zone 2 - 250x250x115mm -

Tue, 1 Dec 2009 12:51:14 +0000

ATEX Certified Junction Box - Ex Zones 2 & 22 - 250 x 250 x 115mm Junction box according to E DIN IEC 60998-2-5 Explosion protection Zones 2 & 22 - ATEX certified II 3 G D E Ex nA Weather-proof IP65 Shock resistant Halogen free Ui = 690V Options: Standard box complete with 5-pole high position screw terminals - 16 mm2 (4 x 16 mm2 / 4 x 25 mm2 / 4 x 35 mm2) Available as empty box - without terminals Important note: Must be used with appropriate Ex glands / fittings GBP 51.48 January 30, 2010 ]]>

Merlin Membrane -

Tue, 1 Dec 2009 12:51:14 +0000

Membrane for Merlin Reverse Osmosis System GBP 89.00 January 30, 2010 ]]>

Bio-Tek water absorbing filter (complete - with head) - 260 BHG-10

Tue, 1 Dec 2009 12:51:14 +0000

Bio-Tek HydroGlass water absorbing filter Complete with head - 1" BSPF inline ports For biodiesel applications upto B100: Transfer tanks Above ground tanks Low volume applications Fits on outlet side of pump. Water absorbtion to provide cleaner burning fuel as well as longer fuel pump and injector life. Will provide particulate filtration to 10 micron, although prior filtration of fuel to 1 micron is recommended to give maximum lifespan of cartridges. Holds upto 260ml of water Provides particulate filtration to 10 micron Rated for flow rates upto 65 litres/min Max working pressure 3.4 Bar Max differential pressure 1.7 Bar Also available: Head only: See Filtration -> Accessories Cartridge only: See Filtration -> Filter cartridges GBP 59.95 January 30, 2010 ]]>

Head for Bio-Tek BHG260 -

Tue, 1 Dec 2009 12:51:14 +0000

Filter head for Bio-Tek water absorbing filter BHG 260 Aluminium adapter 1" BSPF inline ports M6 fixation points Flow rate upto 65 l/min GBP 24.95 January 30, 2010 ]]>

Bio-Tek HydroGlass BHG 260-10 - Water absorbing filter cartridge -

Tue, 1 Dec 2009 12:51:14 +0000

Water absorbing filter cartridge Suitable for biodiesel upto B100 Holds upto 260ml of water Provides particulate filtration to 10 micron Max flow rate 65 litres/min Max working pressure 3.4 Bar Max differential pressure 1.7 Bar 3 to 10 times life expectancy of cellulose media Ease of installation with pre-lubricated gasket Water absorbtion provided cleaner burning fuel and can prolong life of fuel pump and injectors GBP 35.00 January 30, 2010 ]]>

Full EN14214 analysis -

Tue, 1 Dec 2009 12:51:14 +0000

Full EN14214 analysis - book online Full analysis of biodiesel against EN14214 standard. Laboratory work and certification is carried out by industry leading laboratory network.UK laboratories are UKAS accredited. Results available within 7 days of sample receipt. Once booking has been made, we will determine your nearest laboratory and contact you with details.Please ensure the details you have registered with us are correct Minimum sample required - 3 litres Parameter Preferred method Specification Alternate methods Price � Min Max ASTM IP �GBP Density @ 15�C g/l EN ISO 12185 860 900 D4052 365 12.00 Viscosity @ 40�C mm2/s EN ISO 3104 3.5 5.0 D445 71 34.00 Flash Point �C EN ISO 3679 120 D93 or D328 523 59.00 Sulphur content mg/kg EN ISO 20846 / EN ISO 20884 10 D3120 373 84.00 Carbon residue %mass EN ISO 10370 0.30 D9189 or D4530 13 210.00 Cetane number � EN ISO 5165 51 D613 41 158.00 Sulphated ash %mass ISO 3987 0.02 D874 163 44.00 Water content mg/kg EN ISO 12937 500 D2709 438 40.00 Total contamination mg/kg EN 12662 24 D6217 440 40.00 Copper strip corrosion � EN ISO 2160 Class 1 D130 154 43.00 Oxidation stability hrs@110 �C EN 14112 6 60.00 Acid value mgKOH/g EN 14104 0.50 D664 or D974 42.00 Iodine value � EN14111 120 84 42.00 Linolenic acid methyl ester %mass EN 14103 12 132.00 Polyunsaturated methyl esters %mass 1 Ester content %mass 96.5 Methanol content %mass EN 141110 0.20 132.00 Monoglyceride content %mass EN 14105 / 6 0.80 132.00 Diglyceride content %mass 0.20 Triglyceride content %mass 0.20 Free glycerol %mass 0.02 D6584 Total glycerol %mass 0.25 Group I (alkali) metals (Na + K) mg/kg EN 14108 (Na) & 14109 (K) 5.0 53.00 Group II (alkali) metals (Ca + Mg) mg/kg EN 14538 5.0 41.00 Phosphorus content mg/kg EN 14107 10.0 41.00 Cold Filter Plugging Point �C EN 116 Climate related 51.00 Total cost 1450.00 GBP 795.00 January 30, 2010 ]]>

12kW ATEX certified flameproof immersion heater -

Tue, 1 Dec 2009 12:51:14 +0000

12kW Flameproof immersion heaterATEX Certified Ex II 2 G EEx d IIC T4 Zone 1Low watts density 321 Stainless Steel sheathed embedded rod type elements (5.58 W/cm2 = 36W/inch2)686mm immersed length with 50mm inactiveLightweight cast aluminium power coated enclosure, weatherproof to IP672�" BSP 316L stainless steel boss fixing with Viton seal1 x M25 and 1 x M20 cable entryAuto-reset thermostat range +5/80�CManual-reset limit thermostat set at 95�CTest Pressure 24 Bar g GBP 495.00 January 30, 2010 ]]>

Key point analysis -

Tue, 1 Dec 2009 12:51:14 +0000

Key point analysis To allow producers to ensure biodiesel meets key parameters without the expense of full type-approval: Ester content - % mass to EN 14103 Water content - mg/Kg to EN ISO 12937 Group I metals (Na,K) - mg/kg to EN 14108 & EN 14109 Oxidation stability - Rancimat hrs@110�C to EN 14112 Sulphur content - mg/Kg to EN ISO 20846 / EN ISO 20884 Certification biodiesel meets UK fiscal definition for HMRC Assurance of: Process quality & Ester yield Low water content Storage stability Minimum sample required: 1 litre GBP 299.00 January 30, 2010 ]]>

Merlin - Complete On-demand Reverse Osmosis System -

Tue, 1 Dec 2009 12:51:14 +0000

Merlin - On-demand Reverse Osmosis System Upto 4,000 litres per day of purified water Upto 75% less waste water compared to conventional RO systems Incorporates carbon pre-filter and then two patented high-flow reverse osmosis membranes. The concentrate from the first membrane is channelled through the second to reduce waste water by approximately 75% compared to conventional systems. Purified water outlet can be used 'as is' or channelled through further post-treatment, such as de-ionisation to produce water upto 18MΩ, or further carbon post filter... Merlin system requires minimum inlet pressure of just 2.8 Bar and so in most cases mains water pressure is adequate - requiring no pump and no electricity. Where inlet pressure is below this an optional pressure activated booster pump is available. You will find the great majority of questions regarding the use of the Merlin Reverse Osmosis System are answered in the brochure and supporting documentation in the links below.Please click on any of the following links to open the relevant PDF documents: Merlin Brochure Installation Guide Application Guide Flow Calculator Performance Data Warranty Documentation GBP 295.00 January 30, 2010 ]]>

Merlin Carbon Post-filter -

Tue, 1 Dec 2009 12:51:14 +0000

Carbon post-filter for Merlin Reverse Osmosis System GBP 18.00 January 30, 2010 ]]>

100 litre pressure vessel assembly -

Tue, 1 Dec 2009 12:51:14 +0000

Polyglass pressure vessel assembly- 100 litre nominal capacity Pressure vessel assembly to accomodate ion-exchange resinsSystem includes: Moulded head with 3/4" BSPF ports Base, riser tube, diffuser & screens Construction: PE liner reinforced with fibre glass and epoxy resin Vessel size: 334mm diameter x 1390mm height (+ head) Max temp: 50�C Max pressure: 10 Bar GBP 219.00 January 30, 2010 ]]>

Automated moisture analyser - Coulometric KF titrator -

Tue, 1 Dec 2009 12:51:14 +0000

Automated moisture analyser - Coulometric Karl Fischer (KF) titration Biodiesel: Determination of moisture content in accordance with EN ISO 12937 - method required by EN 14214 & ASTM D 6751 biodiesel standards Vegetable oils: Determination of moisture content in accordance with EN ISO 12937 - method required by DIN V 51605 standard Bioethanol: Determine of moisture content in accordance with ASTM E 1064 - method specified in ASTM D 4806 & ASTM D 5798 standards Other biofuel related applications including analysis of Glycerol Highest quality Swiss made instrument from Metrohm Complete system Full 3 year warranty A4 footprint coulometric KF titrator with a 100 x 37mm live titration curve display. Has the ability to set windows for tolerances of sample size and result limits. Can be fully automated, as the instrument has 2 RS232's and a remote socket, and has keyboard locking capabilities. Option for automatic reagent exchange with our unique Dosino. An external printer can be attached for printout of the result and curve. Includes VESUV archiving software free of charge. Includes magnetic stirrer with electrode holder and stand (designed for continuous use). GBP 4450.00 January 30, 2010 ]]>

Rancimat - automatic determination of oxidative stability -

Tue, 1 Dec 2009 12:51:14 +0000

Racimat - automatic determination of oxidation stability Determination according to EN 14112 as specified by EN 14214 biodiesel standard Highest quality Swiss made instrument from Metrohm Full 3 year warranty 873 Biodiesel Rancimat Fatty acid methyl esters are usually obtained from oil seeds. During manufacture the vegetable oil is transesterified with methanol. This produces the methyl esters of the fatty acids present in the oil with glycerol as a byproduct. Vegetable oils and fatty acid methyl esters have a relatively short storage life as they are slowly oxidized by atmospheric oxygen. The resulting oxidation products can damage vehicle motors. For this reason the oxidation stability is an important quality criterion for biodiesel and vegetable oils and must therefore be checked regularly during manufacture and storage. With the 873 Biodiesel Rancimat this determination can be carried out simply and reliably. The addition of suitable antioxidants slows down the oxidation process. The effectiveness of antioxidants can also be determined with the 873 Biodiesel Rancimat. The 873 Biodiesel Rancimat is a modern, PC-controlled instrument for the convenient determination of the oxidation stability of oils and fats. The temperature can be set very accurately and reproducibly by using the GLP Set with certified temperature sensor; this further improves the precision of the results. GBP 14450.00 January 30, 2010 ]]>

Potentiometric Titrator -

Tue, 1 Dec 2009 12:51:14 +0000

Compact Potentiometric Titrator Ideal for determination of Acid Value (AV) or Iodine Value (IV) and all basic titration needs Highest quality Swiss made instrument from Metrohm Full 3 year warranty Low cost A4 footprint potentiometric titrator with DET, MET, SET and CAL modes. Automatic recognition of burette size. Can add up to 2 dosimats for dosing in auxiliary reagents e.g. back titrations. Has keyboard locking possibilities. Can be fully automated, as the instrument has 2 RS232's and a remote socket. Includes VESUV archiving software free of charge. DET mode - Dynamic titration with adaptation of the volume increments to the slope of the titration curve MET mode - Monotonic titration with selectable, fixed volume increments SET mode - Titration to fixed endpoint (potentiometrically or with polarized electrodes); 2 endpoints can be set. Titration solution can be conditioned; pH stat applications are possible, as are KF titrations CAL mode - pH calibration with up to 9 buffers See products webpage for more information - click on link below Options: Magnetic stirrer including electrode holder + stand Long-life pH electrode (for determination of AVs) GBP 3595.00 January 30, 2010 ]]>

PBH 410 BK Basket -

Tue, 1 Dec 2009 12:51:14 +0000

Replacement bag basket for PBH-410 housing GBP 50.00 January 30, 2010 ]]>

PBH 420 BK Basket -

Tue, 1 Dec 2009 12:51:14 +0000

Replacement bag basket for PBH-420 housing GBP 75.00 January 30, 2010 ]]>

950W Insulated drum heater -

Tue, 1 Dec 2009 12:51:14 +0000

950W Heating jacket for 205 litre drums Jacket heater for 205 litre drums (45 Imp Gal / 55 US Gal) High quality insulation and direct contact with the drum ensures much higher efficiency than normal band heaters. Materials of construction - coated nylon and custom coated glass cloth outer material with stitched fibre glass insulation. 3 adjustable straps 950W nominal power at 240v 1800-1950mm circumference (71" to 76�") 780mm height (30�") Integral 0-90�C capillary thermostat 5m supply cable (PVC insulated, sheathed, galvanised steel braided wire) GBP 689.00 January 30, 2010 ]]>

25 litre pressure vessel assembly -

Tue, 1 Dec 2009 12:51:14 +0000

Polyglass pressure vessel assembly- 25 litre nominal capacity Pressure vessel assembly to accomodate ion-exchange resinsSystem includes: Moulded head with 3/4" BSPF ports Base, riser tube, diffuser & screens Construction: PE liner reinforced with fibre glass and epoxy resin Vessel size: 203mm diameter x 889mm height (+ head) Max temp: 50�C Max pressure: 10 Bar GBP 89.00 January 30, 2010 ]]>

48 litre pressure vessel assembly -

Tue, 1 Dec 2009 12:51:14 +0000

Polyglass pressure vessel assembly- 48 litre nominal capacity Pressure vessel assembly to accomodate ion-exchange resinsSystem includes: Moulded head with 3/4" BSPF ports Base, riser tube, diffuser & screens Construction: PE liner reinforced with fibre glass and epoxy resin Vessel size: 254mm diameter x 1118mm height (+ head) Max temp: 50�C Max pressure: 10 Bar GBP 119.00 January 30, 2010 ]]>

3150W (3 x 1050W) Treble IBC jacket heater -

Tue, 1 Dec 2009 12:51:14 +0000

3150W (3 x 1050W) Treble IBC jacket heater 3150W - 3 x 1050W IBC jacket heater Three heating circuits allows separate sections of jackets to be individually controlled 4060-4310mm circumference, 950mm height 240V with 0-90�C thermostats supplied as standard Three 5m supply cables Includes insulated lid GBP 1849.00 January 30, 2010 ]]>

Distribution system for 100 litre pressure vessel -

Tue, 1 Dec 2009 12:51:14 +0000

Distribution system for 100 litre (13 x 54") pressure vessel 2�" threaded cap with �" inlet / outlet ports, upper screen, riser tube and diffuser GBP 27.00 January 30, 2010 ]]>

12.19m Steel braided fuel dispensing hose 25mm bore -

Tue, 1 Dec 2009 12:51:14 +0000

Goodyear steel braided fuel dispensing hose - 12.19m (40ft) Tested and approved to EN1360 Suitable for use with biodiesel, diesel, petrol and alcohol blends 25mm nominal bore Complete with 1" BSP parallel zinc plated "swaged for life" end fittings DESCRIPTION Premium quality steel wire braid rubber hose for all types of dispensers. Its unique construction bonds the tube to the cover through the reinforcement. This provides a homogeneous wall to stop delamination and construction failure. Made to the highest production standards using laser technology and 100% proof testing as standard manufacturing procedure. Provides safety and durability for the toughest punishment of high volume self-service applications, where safety and strength are essential. BENEFITS The hardwall steel braid wire construction offers : Extra strength and durability Failsafe electrical conductivity Crush, kink and cut resistant Low volumetric expansion for accurate metering Nil delamination Complete assemblies, coupled and tested. PERFORMANCE Uses compounds with excellent resistance to diesel oils, reformulated petrol and alcohol blends. Biodiesel compatible APPROVAL Hose and assemblies meet the requirements of EN 1360 with branded hose and couplings. CONSTRUCTION TUBE: Chemigum� rubber (ORS) REINFORCEMENT: Steel wire braid COVER: Ozone resistant rubber TEMPERATURE: -25�C to +88�C MAX PRESSURE: 15.8 Bar (230psi) COLOUR: Black COUPLINGS: Goodyear specification mild steel zinc plated GBP 299.95 January 30, 2010 ]]>

Upper screen for pressure vessel distributor -

Tue, 1 Dec 2009 12:51:14 +0000

Spare upper screen for pressure vessel distribution system Locates over riser tube into head of the distributor GBP 2.00 January 30, 2010 ]]>

1400 litre Biofuel Station -

Tue, 1 Dec 2009 12:51:14 +0000

Harlequin BioFuel Station - 1400 litre size Biodiesel storage system complete with fuel dispensing system New generation of storage tank developed specifically for the safe, secure and environmentally responsible storage of up to B100 Grade (100%) Biodiesel Fully bunded and manufactured from an advanced Biodiesel resistant grade of Medium Density Polyethylene. Harlequin BioFuel Stations are fully compliant with all relevant requirements contained within the most demanding British and European regulations - including The Control of Pollution (Oil Storage) (England) Regulations 2001 and The Water Environment (Oil Storage) (Scotland) Regulations 2006. Features: Fully bunded Complete with Piusi pump and Biodiesel resistant fuel delivery hose and nozzle Failsafe overfill prevention capability Particulate filtration Emergency isolation switch Electronic contents gauge 1400BFS (Standard) 1400BFA (Arctic) Diameter 1570mm Height 1850mm Weight 147Kg Actual Capacity 1487 litres Nominal Capacity 1413 litres Arctic Grade version: Arctic Grade version consists of a preinsulated tank, thermostatically controlled heat trace system and cabinet heater. Arcitc Grade models should be used for storing BioDiesel in cold weather conditions. Available option: Mechanical flow meter (Other options are available P.O.A. including fuel management systems, thermostatically activated heating system and bund warning alarm) GBP 1792.00 January 30, 2010 ]]>

2500 litre Biofuel Station -

Tue, 1 Dec 2009 12:51:14 +0000

Harlequin BioFuel Station - 2500 litre size Biodiesel storage system complete with fuel dispensing system New generation of storage tank developed specifically for the safe, secure and environmentally responsible storage of up to B100 Grade (100%) Biodiesel Fully bunded and manufactured from an advanced Biodiesel resistant grade of Medium Density Polyethylene. Harlequin BioFuel Stations are fully compliant with all relevant requirements contained within the most demanding British and European regulations - including The Control of Pollution (Oil Storage) (England) Regulations 2001 and The Water Environment (Oil Storage) (Scotland) Regulations 2006. Features: Fully bunded Complete with Piusi pump and Biodiesel resistant fuel delivery hose and nozzle Mechanical flow meter Failsafe overfill prevention capability Particulate filtration Emergency isolation switch Electronic contents gauge 2500BFS (Standard) 2500BFA (Arctic) Diameter 2090mm Height 1800mm Weight 200Kg Actual Capacity 2579 litres Nominal Capacity 2450 litres Arctic Grade version: Arctic Grade version consists of a preinsulated tank, thermostatically controlled heat trace system and cabinet heater. Arcitc Grade models should be used for storing BioDiesel in cold weather conditions. (Other options are available P.O.A. including fuel management systems, thermostatically activated heating system and bund warning alarm) GBP 1960.00 January 30, 2010 ]]>

5000 litre Biofuel Station -

Tue, 1 Dec 2009 12:51:14 +0000

Harlequin BioFuel Station - 5000 litre size Biodiesel storage system complete with fuel dispensing system New generation of storage tank developed specifically for the safe, secure and environmentally responsible storage of up to B100 Grade (100%) Biodiesel Fully bunded and manufactured from an advanced Biodiesel resistant grade of Medium Density Polyethylene. Harlequin BioFuel Stations are fully compliant with all relevant requirements contained within the most demanding British and European regulations - including The Control of Pollution (Oil Storage) (England) Regulations 2001 and The Water Environment (Oil Storage) (Scotland) Regulations 2006. Features: Fully bunded Complete with Piusi pump and Biodiesel resistant fuel delivery hose and nozzle High accuracy digital flow meter (+/-0.5% accuracy with +/-0.2% repeatability) Failsafe overfill prevention capability Particulate filtration Emergency isolation switch Electronic contents gauge Bund warning alarm 5000BFS (Standard) 5000BFA (Arctic) Length 2950mm Width 2520mm Height 2500mm Weight 380Kg Actual Capacity 5307 litres Nominal Capacity 5042 litres Arctic Grade version: Arctic Grade version consists of a preinsulated tank, thermostatically controlled heat trace system and cabinet heater. Arcitc Grade models should be used for storing BioDiesel in cold weather conditions. Optional Fuel Management System: Easy to use fuel management system. Activated by a user specific magnetic key fob, the system is suitable for up to 80 users. GBP 4140.00 January 30, 2010 ]]>

10000 litre Biofuel Station -

Tue, 1 Dec 2009 12:51:14 +0000

Harlequin BioFuel Station - 10000 litre size Biodiesel storage system complete with fuel dispensing system New generation of storage tank developed specifically for the safe, secure and environmentally responsible storage of up to B100 Grade (100%) Biodiesel Fully bunded and manufactured from an advanced Biodiesel resistant grade of Medium Density Polyethylene. Harlequin BioFuel Stations are fully compliant with all relevant requirements contained within the most demanding British and European regulations - including The Control of Pollution (Oil Storage) (England) Regulations 2001 and The Water Environment (Oil Storage) (Scotland) Regulations 2006. Features: Fully bunded Complete with Piusi pump and Biodiesel resistant fuel delivery hose and nozzle High accuracy digital flow meter (+/-0.5% accuracy with +/-0.2% repeatability) Failsafe overfill prevention capability Particulate filtration Emergency isolation switch Electronic contents gauge Bund warning alarm 10000BFS (Standard) 10000BFA (Arctic) Length 3250mm Width 2800mm Height 3350mm Weight 725Kg Actual Capacity 10100 litres Nominal Capacity 9595 litres Arctic Grade version: Arctic Grade version consists of a preinsulated tank, thermostatically controlled heat trace system and cabinet heater. Arcitc Grade models should be used for storing BioDiesel in cold weather conditions. Optional Fuel Management System: Easy to use fuel management system. Activated by a user specific magnetic key fob, the system is suitable for up to 80 users. GBP 6499.00 January 30, 2010 ]]>

K33 Mechanical flow meter -

Tue, 1 Dec 2009 12:51:14 +0000

K33 - 1" Mechanical flow meter Nutating disc meter for non-commercial use. Reliable, inexpensive, easy to install and simple to calibrate in the workplace. Low flow resistance means it can also be used for gravity fed systems. 1" G inlet / 1" G outlet - inline. Flow-rate (range): 20 - 120 l/min Precision: +/- 1% within flow range after calibration Repeatability: 0.2% Max. operating pressure: 10 bar (142 psi). Bursting pressure: 30 bar (426 psi). Readout: 3 digit subtotal, 6 digit total Resolution: 0.1 litre GBP 95.00 January 30, 2010 ]]>

K44 Mechanical flow meter -

Tue, 1 Dec 2009 12:51:14 +0000

K44 - 1" Mechanical flow meter Nutating disc meter for non-commercial use. Reliable, inexpensive, easy to install and simple to calibrate in the workplace. Low flow resistance means it can also be used for gravity fed systems. 1" G inlet / 1" G outlet - inline. Flow-rate (range): 20 - 120 l/min Precision: +/- 1% within flow range after calibration Repeatability: 0.2% Max. operating pressure: 10 bar (142 psi). Bursting pressure: 30 bar (426 psi). Readout: 4 digit subtotal, 7 digit total Resolution: 0.1 litre GBP 139.00 January 30, 2010 ]]>

95 litre Fuel Bladder -

Tue, 1 Dec 2009 12:51:14 +0000

95 litre Biodiesel Fuel Bladder Range extension bladder tank specially adapted for biodiesel use. Based on ATL's Petro-Flex range extender bladder tanks, these fuel bladders are made from Rubberised Ballistic Nylon with an addtional biodiesel resistant internal lining. Biodiesel users often find availability of biodiesel is problematic on long journeys when away from their normal fuelling source. Provided the fuel bladder can be appropriately sited and secured, these fuel bladders can used as an auxillary tank and make long-distance journeys possible! Dimensions: Flat dimensions - 915mm x 760mm Nominal fill height - 254mm Stand Pipe height - 216mm Filling:Tanks are filled through 50mm diameter fill pipe which accomodates standard filling station nozzles. Flap valve at the base of the fill pipe prevents fuel backflow and the fill cap incorporates an emergency vent valve that automatically relieves pressure in case of excessive heat or overfill. Draining:Tank drains via 12mm barbed outlet for connection to main fuel tank. Quarter turn ball valve at outlet flange to quickly turn fuel flow on or off. Options: Tie down kit with collar and 4 straps Sun-shield - pillow case type cover - helps protect against abrasion, heat and UV rays Tote bag - light weight mesh carry bag to hold empty bladder and accessories for easy transportation and storage GBP 745.00 January 30, 2010 ]]>

190 litre Fuel Bladder -

Tue, 1 Dec 2009 12:51:14 +0000

190 litre Biodiesel Fuel Bladder Range extension bladder tank specially adapted for biodiesel use. Based on ATL's Petro-Flex range extender bladder tanks, these fuel bladders are made from Rubberised Ballistic Nylon with an addtional biodiesel resistant internal lining. Biodiesel users often find availability of biodiesel is problematic on long journeys when away from their normal fuelling source. Provided the fuel bladder can be appropriately sited and secured, these fuel bladders can used as an auxillary tank and make long-distance journeys possible! Dimensions: Flat dimensions - 1400mm x 890mm Nominal fill height - 305mm Stand Pipe height - 216mm Filling:Tanks are filled through 50mm diameter fill pipe which accomodates standard filling station nozzles. Flap valve at the base of the fill pipe prevents fuel backflow and the fill cap incorporates an emergency vent valve that automatically relieves pressure in case of excessive heat or overfill. Draining:Tank drains via 12mm barbed outlet for connection to main fuel tank. Quarter turn ball valve at outlet flange to quickly turn fuel flow on or off. Options: Tie down kit with collar and 4 straps Sun-shield - pillow case type cover - helps protect against abrasion, heat and UV rays Tote bag - light weight mesh carry bag to hold empty bladder and accessories for easy transportation and storage GBP 872.50 January 30, 2010 ]]>

380 litre Fuel Bladder -

Tue, 1 Dec 2009 12:51:14 +0000

380 litre Biodiesel Fuel Bladder Range extension bladder tank specially adapted for biodiesel use. Based on ATL's Petro-Flex range extender bladder tanks, these fuel bladders are made from Rubberised Ballistic Nylon with an addtional biodiesel resistant internal lining. Biodiesel users often find availability of biodiesel is problematic on long journeys when away from their normal fuelling source. Provided the fuel bladder can be appropriately sited and secured, these fuel bladders can used as an auxillary tank and make long-distance journeys possible! Dimensions: Flat dimensions - 1400mm x 1350mm Nominal fill height - 356mm Stand Pipe height - 216mm Filling:Tanks are filled through 50mm diameter fill pipe which accomodates standard filling station nozzles. Flap valve at the base of the fill pipe prevents fuel backflow and the fill cap incorporates an emergency vent valve that automatically relieves pressure in case of excessive heat or overfill. Draining:Tank drains via 12mm barbed outlet for connection to main fuel tank. Quarter turn ball valve at outlet flange to quickly turn fuel flow on or off. Options: Tie down kit with collar and 4 straps Sun-shield - pillow case type cover - helps protect against abrasion, heat and UV rays Tote bag - light weight mesh carry bag to hold empty bladder and accessories for easy transportation and storage GBP 992.50 January 30, 2010 ]]>

570 litre Fuel Bladder -

Tue, 1 Dec 2009 12:51:14 +0000

570 litre Biodiesel Fuel Bladder Range extension bladder tank specially adapted for biodiesel use. Based on ATL's Petro-Flex range extender bladder tanks, these fuel bladders are made from Rubberised Ballistic Nylon with an addtional biodiesel resistant internal lining. Biodiesel users often find availability of biodiesel is problematic on long journeys when away from their normal fuelling source. Provided the fuel bladder can be appropriately sited and secured, these fuel bladders can used as an auxillary tank and make long-distance journeys possible! Dimensions: Flat dimensions - 1830mm x 1400mm Nominal fill height - 457mm Stand Pipe height - 216mm Filling:Tanks are filled through 50mm diameter fill pipe which accomodates standard filling station nozzles. Flap valve at the base of the fill pipe prevents fuel backflow and the fill cap incorporates an emergency vent valve that automatically relieves pressure in case of excessive heat or overfill. Draining:Tank drains via 12mm barbed outlet for connection to main fuel tank. Quarter turn ball valve at outlet flange to quickly turn fuel flow on or off. Options: Tie down kit with collar and 4 straps Sun-shield - pillow case type cover - helps protect against abrasion, heat and UV rays Tote bag - light weight mesh carry bag to hold empty bladder and accessories for easy transportation and storage GBP 1060.00 January 30, 2010 ]]>

760 litre Fuel Bladder -

Tue, 1 Dec 2009 12:51:14 +0000

760 litre Biodiesel Fuel Bladder Range extension bladder tank specially adapted for biodiesel use. Based on ATL's Petro-Flex range extender bladder tanks, these fuel bladders are made from Rubberised Ballistic Nylon with an addtional biodiesel resistant internal lining. Biodiesel users often find availability of biodiesel is problematic on long journeys when away from their normal fuelling source. Provided the fuel bladder can be appropriately sited and secured, these fuel bladders can used as an auxillary tank and make long-distance journeys possible! Dimensions: Flat dimensions - 2030mm x 1500mm Nominal fill height - 508mm Stand Pipe height - 216mm Filling:Tanks are filled through 50mm diameter fill pipe which accomodates standard filling station nozzles. Flap valve at the base of the fill pipe prevents fuel backflow and the fill cap incorporates an emergency vent valve that automatically relieves pressure in case of excessive heat or overfill. Draining:Tank drains via 12mm barbed outlet for connection to main fuel tank. Quarter turn ball valve at outlet flange to quickly turn fuel flow on or off. Options: Tie down kit with collar and 4 straps Sun-shield - pillow case type cover - helps protect against abrasion, heat and UV rays Tote bag - light weight mesh carry bag to hold empty bladder and accessories for easy transportation and storage GBP 1255.00 January 30, 2010 ]]>

1150 litre Fuel Bladder -

Tue, 1 Dec 2009 12:51:14 +0000

1150 litre Biodiesel Fuel Bladder Range extension bladder tank specially adapted for biodiesel use. Based on ATL's Petro-Flex range extender bladder tanks, these fuel bladders are made from Rubberised Ballistic Nylon with an addtional biodiesel resistant internal lining. Biodiesel users often find availability of biodiesel is problematic on long journeys when away from their normal fuelling source. Provided the fuel bladder can be appropriately sited and secured, these fuel bladders can used as an auxillary tank and make long-distance journeys possible! Dimensions: Flat dimensions - 2260mm x 1780mm Nominal fill height - 559mm Stand Pipe height - 216mm Filling:Tanks are filled through 50mm diameter fill pipe which accomodates standard filling station nozzles. Flap valve at the base of the fill pipe prevents fuel backflow and the fill cap incorporates an emergency vent valve that automatically relieves pressure in case of excessive heat or overfill. Draining:Tank drains via 12mm barbed outlet for connection to main fuel tank. Quarter turn ball valve at outlet flange to quickly turn fuel flow on or off. Options: Tie down kit with collar and 4 straps Sun-shield - pillow case type cover - helps protect against abrasion, heat and UV rays Tote bag - light weight mesh carry bag to hold empty bladder and accessories for easy transportation and storage GBP 1367.50 January 30, 2010 ]]>

20 litre Saver Cell -

Tue, 1 Dec 2009 12:51:14 +0000

20 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 1 x -6 Fuel pickup and filter 1 x -6 Rollover vent Dimensions: 330mm length x 330mm width x 230mm height GBP 570.00 January 30, 2010 ]]>

30 litre Saver Cell -

Tue, 1 Dec 2009 12:51:14 +0000

30 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 505mm length x 305mm width x 224mm height GBP 585.00 January 30, 2010 ]]>

40 litre Saver Cell -

Tue, 1 Dec 2009 12:51:14 +0000

40 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 602mm length x 314mm width x 254mm height GBP 595.50 January 30, 2010 ]]>

45 litre Saver Cell -

Tue, 1 Dec 2009 12:51:14 +0000

45 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 502mm length x 437mm width x 234mm height GBP 601.50 January 30, 2010 ]]>

60 litre Saver Cell -

Tue, 1 Dec 2009 12:51:14 +0000

60 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 602mm length x 437mm width x 234mm height GBP 642.00 January 30, 2010 ]]>

80 litre Saver Cell (square) -

Tue, 1 Dec 2009 12:51:14 +0000

80 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 640mm length x 640mm width x 210mm height GBP 696.00 January 30, 2010 ]]>

80 litre Saver Cell (tall) -

Tue, 1 Dec 2009 12:51:14 +0000

80 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 620mm length x 415mm width x 338mm height GBP 696.00 January 30, 2010 ]]>

80 litre Saver Cell (long) -

Tue, 1 Dec 2009 12:51:14 +0000

80 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 843mm length x 435mm width x 235mm height GBP 696.00 January 30, 2010 ]]>

100 litre Saver Cell (long) -

Tue, 1 Dec 2009 12:51:14 +0000

100 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 740mm length x 425mm width x 350mm height GBP 771.00 January 30, 2010 ]]>

100 litre Saver Cell (tall) -

Tue, 1 Dec 2009 12:51:14 +0000

100 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 635mm length x 430mm width x 430mm height GBP 771.00 January 30, 2010 ]]>

120 litre Saver Cell (square) -

Tue, 1 Dec 2009 12:51:14 +0000

120 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 640mm length x 640mm width x 338mm height GBP 810.00 January 30, 2010 ]]>

120 litre Saver Cell (narrow) -

Tue, 1 Dec 2009 12:51:14 +0000

120 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 641mm length x 465mm width x 420mm height GBP 810.00 January 30, 2010 ]]>

120 litre Saver Cell (long) -

Tue, 1 Dec 2009 12:51:14 +0000

120 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 845mm length x 437mm width x 361mm height GBP 810.00 January 30, 2010 ]]>

120 litre Saver Cell (tall) -

Tue, 1 Dec 2009 12:51:14 +0000

120 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 635mm length x 430mm width x 535mm height GBP 810.00 January 30, 2010 ]]>

170 litre Saver Cell -

Tue, 1 Dec 2009 12:51:14 +0000

170 litre range extension auxillary fuel tank Moulded polymer fuel tank complete with Aluminium container Developed for automotive racing, Saver Cells are moulded polymer fuel storage tanks. The inside of the tank is filled with baffle foam to prevent fuel slosh. Suitable for use with biodiesel and conventional fuels. Approved by every major racing authority - FIA, USAC, CORR, SCORE, and SCCA. Supplied with Aluminium container - 1.6mm wall thickness, stainless steel quick release clips. 2¼'' diameter non-return filler neck with integral valve and cap 2 x -6 Fuel pickups 1 x -6 Rollover vent Dimensions: 640mm length x 640mm width x 425mm height GBP 870.00 January 30, 2010 ]]>

FT-0100 - Water & Clarity - 12 tests -

Tue, 1 Dec 2009 12:51:14 +0000

Water & Visual Appearance - 12 tests - FT-0100 Simple to use test kits for biodiesel, diesel and biodiesel blends. Two tests in one - rapid assessment of fuel clarity and presence of excess water. 12 test kits per box. Results within 5 minutes. Click here for test kit instructions Water test begins to pick up free water at approximately 500ppm - the upper limit as specified by European standard EN 14214 and US standard ASTM D 6751. Please note, the water test uses a water sensitive solution - it is not a coulometric analysis and does not provide quantitative results. GBP 72.00 January 30, 2010 ]]>

FT-0145 - Total Glycerol - 6 tests -

Tue, 1 Dec 2009 12:51:14 +0000

Total Glycerol Determination - 6 tests - FT-0145 Simple to use test kits for B100 biodiesel and biodiesel blends. Requires no expertise or laboratory equipment. Ideal for on-site diagnosis or as part of simple quality controls for fuel production. Provides results within 2 minutes. Colour change indicates total glycerol % in mass - Click here for test kit instructions GBP 72.00 January 30, 2010 ]]>

FT-0121 - Acid Number - 12 tests -

Tue, 1 Dec 2009 12:51:14 +0000

Acid Number - 12 tests - FT-0121 Simple to use test kits for B100 biodiesel. Requires no expertise or laboratory equipment. Ideal for on-site diagnosis or as part of simple quality controls for fuel production. Results in under a minute.Pink/purple colour change inidicates fuel sample passes the test Click here for test kit instructions Tests for Acid Number in excess of 0.5mgKOH/g GBP 72.00 January 30, 2010 ]]>

Wintron XC40 - 1 litre -

Tue, 1 Dec 2009 12:51:14 +0000

Wintron XC40 - Biodiesel cold flow antigel additive - 1 litre Wintron XC40 is a specially formulated cold flow additive for biodiesel produced from Rapeseed oil and Soy oil - the most commonly encountered feedstock oils in Europe and North America. Extremely effective pour point (PP) and cold filter plugging point (CFPP) reduction at very low concentrations - typical treat rate 0.3% by volume. Click here for further information GBP 13.50 January 30, 2010 ]]>

Wintron XC40 - 25 litre drum -

Tue, 1 Dec 2009 12:51:14 +0000

Wintron XC40 - biodiesel cold flow antigel additive - 25 litre drum Wintron XC40 is a specially formulated cold flow additive for biodiesel produced from Rapeseed oil and Soy oil - the most commonly encountered feedstock oils in Europe and North America. Extremely effective pour point (PP) and cold filter plugging point (CFPP) reduction at very low concentrations - typical treat rate 0.3% by volume. Click here for further information GBP 174.95 January 30, 2010 ]]>

Wintron XC40 - 200 litres -

Tue, 1 Dec 2009 12:51:14 +0000

Wintron XC40 - Biodiesel cold flow antigel additive - 200 litre barrel Wintron XC40 is a specially formulated cold flow additive for biodiesel produced from Rapeseed oil and Soy oil - the most commonly encountered feedstock oils in Europe and North America. Extremely effective pour point (PP) and cold filter plugging point (CFPP) reduction at very low concentrations - typical treat rate 0.3% by volume. Click here for further information GBP 945.00 January 30, 2010 ]]>

Wintron Synergy - 1 litre -

Tue, 1 Dec 2009 12:51:14 +0000

Wintron Synergy� - Cold flow antigel additive for biodiesel - 1 litre Cold filter plugging point (CFPP) and pour point (PP) depressant for biodiesel produced from Rapeseed oil and Canola oil. Results with biodiesel produced from used cooking oil (UCO) are generally excellent, however as the composition of UCO is highly variable customers must determine effectiveness for their biodiesel. Click here for further information GBP 13.50 January 30, 2010 ]]>

Wintron Synergy - 25 litre drum -

Tue, 1 Dec 2009 12:51:14 +0000

Wintron Synergy� - Cold flow antigel additive for biodiesel - 25 litre drum Cold filter plugging point (CFPP) and pour point (PP) depressant for biodiesel produced from Rapeseed oil and Canola oil. Results with biodiesel produced from used cooking oil (UCO) are generally excellent, however as the composition of UCO is highly variable customers must determine effectiveness for their biodiesel. Click here for further information GBP 179.95 January 30, 2010 ]]>

Wintron Synergy - 200 litres -

Tue, 1 Dec 2009 12:51:14 +0000

Wintron Synergy� - Cold flow antigel additive for biodiesel - 200 litre barrel Cold filter plugging point (CFPP) and pour point (PP) depressant for biodiesel produced from Rapeseed oil and Canola oil. Results with biodiesel produced from used cooking oil (UCO) are generally excellent, however as the composition of UCO is highly variable customers must determine effectiveness for their biodiesel. Click here for further information GBP 945.00 January 30, 2010 ]]>

Wintron - sample pack -

Tue, 1 Dec 2009 12:51:14 +0000

Wintron biodiesel cold flow antigel additives - sample pack Pack includes: 1 litre bottle Wintron XC30 1 litre bottle Wintron XC40 1 litre bottle Wintron Synergy&trade Information sheets Material Safety Data Sheets (MSDS) � Wintron XC30 Original broad-spectrum formulation. Effective for the widest range of feedstock oils. Low cost cold flow antigel additive. Click here for Wintron XC30 information sheet � Wintron XC40 Specially formulated for biodiesel produced from Rapeseed oil and Soy oil - the most commonly encountered feedstock oils in Europe and North America. Very low treat rate and dramatic reduction seen in pour point (PP) and cold filter plugging point (CFPP) with suitable types of biodiesel. Click here for Wintron XC40 information sheet � Wintron Synergy&trade Stand-alone CFPP depressant for biodiesel produced from Rapeseed oil or Canola oil. Excellent results are generally seen with used cooking oil biodiesel. Can also act synergistically with Wintron X series additives (e.g. Wintron XC30 or Wintron XC40) to further reduce PP of some types of biodiesel. Click here for Wintron Synergy information sheet GBP 39.00 January 30, 2010 ]]>

12V DC Vegetable oil transfer pump (4 l/min) -

Tue, 1 Dec 2009 12:51:14 +0000

Viscomat DC 60/1 12 V - 12V DC pump for viscous liquids upto 2000 cSt Suitable for vegetable oil and biodiesel �" BSP inlet / outlet Flow rate upto 4 litres / min Pressures upto 5 Bar 16A 12V DC motor - 30 minute duty cycle Noise GBP 189.00 January 30, 2010 ]]>

12V DC Vegetable oil transfer pump (10 l/min) -

Tue, 1 Dec 2009 12:51:14 +0000

Viscomat DC 60/2 12 V - 12V DC pump for viscous liquids upto 600 cSt Suitable for vegetable oil and biodiesel �" BSP inlet / outlet Flow rate upto 10 litres / min Pressures upto 4 Bar 35A 12V DC motor - 30 minute duty cycle Noise GBP 219.00 January 30, 2010 ]]>

Biodiesel pump system (70 l/min) -

Tue, 1 Dec 2009 12:51:14 +0000

Cube 70 Biodiesel pump system Complete with pump, flow meter, hose and delivery nozzle Optional IBC coupling kit: IBC adapter, 2m hose, swivel & 1" hosetail Flow rate upto 70 litres / min Accuracy of flow meter +/- 1% Technical features Self-supporting stamped-plate structure, treated against corrosion and paint-finished, ready to install. Self-priming vane pump, fitted with bypass valve, mounted on antivibration supports. Mechanical seal. Self-ventilated enclosed motor (IP 55), single-phase versions provided with heat protection. Intake filter for pump protection Disc meter with mechanical readout system Automatic pump nozzle complete with flexible hose and swivel connection In-built nozzle-holder provided with pump start/stop lever Noise level: below 70 dB Rated for continuous operation at 230 V GBP 495.00 January 30, 2010 ]]>

3/4" male BSP to 25mm (1") ID hose -

Tue, 1 Dec 2009 12:51:14 +0000

3/4" male BSP -> tail for 25mm (1") nominal bore hose Polypropylene Temperatures upto 70�C GBP 4.99 January 30, 2010 ]]>

Baynox Solution - 25 litre drum -

Tue, 1 Dec 2009 12:51:14 +0000

Baynox Plus Solution - 1 litre bottle -

Tue, 1 Dec 2009 12:51:14 +0000

Baynox� Plus Solution Biodiesel Stabilizer is suitable for making biodiesel storage-stable. Baynox� Plus Solution is effective for all types of biodiesel. It is recommended especially for more easily perishable types of biodiesel made from oils such as soya, sunflower and Jatropha nut oils. Click here for Baynox Plus Solution Technical Data Sheet Click here for Baynox Plus Solution MSDS Baynox� Plus prevents the premature oxidation of unsaturated fatty acid esters in biodiesel and hence the formation of highly volatile compounds and corrosive carboxylic acids as well as preventing the early formation of polymerized and cross-linked biodiesel gums. The recommended use concentration is 0.125 - 0.2 % l/l for Soy Methyl Ester (SME) Baynox Plus Solution Biodiesel Stabilizer does not have a corrosive action on metals and combusts without residue. It is not a hazardous material and does not require labeling in line with the Regulations on Hazardous Substances It is not subject to the Regulations on Flammable Liquids (VbF) Baynox� Plus is a specially manufactured, highly concentrated solution of the distilled, high-purity active ingredient dissolved in very high purity RME biodiesel. The active substance does not have a corrosive action on ferrous metals. The active ingredient content is set at 20% g/l. This means that measuring out is easily done by measuring the volume. 1 litre Baynox Plus Solution Biodiesel Stabilizer corresponds to 200 g active ingredient. GBP 13.50 January 30, 2010 ]]>

Baynox Plus Solution - Biodiesel Stabilizer - 1000 litres -

Tue, 1 Dec 2009 12:51:14 +0000

890Kg / 1000 litres Baynox� Plus Solution in a standard IBC container Baynox� Plus Solution Biodiesel Stabilizer is suitable for making biodiesel storage-stable. Baynox� Plus Solution is effective for all types of biodiesel. It is recommended especially for more easily perishable types of biodiesel made from oils such as soya, sunflower and Jatropha nut oils. Click here for Baynox Plus Solution Technical Data Sheet Click here for Baynox Plus Solution MSDS Baynox� Plus prevents the premature oxidation of unsaturated fatty acid esters in biodiesel and hence the formation of highly volatile compounds and corrosive carboxylic acids as well as preventing the early formation of polymerized and cross-linked biodiesel gums. The recommended use concentration is 0.125 - 0.2 % l/l for Soy Methyl Ester (SME) Baynox Plus Solution Biodiesel Stabilizer does not have a corrosive action on metals and combusts without residue. It is not a hazardous material and does not require labeling in line with the Regulations on Hazardous Substances It is not subject to the Regulations on Flammable Liquids (VbF) Baynox� Plus is a specially manufactured, highly concentrated solution of the distilled, high-purity active ingredient dissolved in very high purity RME biodiesel. The active substance does not have a corrosive action on ferrous metals. The active ingredient content is set at 20% g/l. This means that measuring out is easily done by measuring the volume. 1 litre Baynox Plus Solution Biodiesel Stabilizer corresponds to 200 g active ingredient. GBP 3095.00 January 30, 2010 ]]>

0.37kW ATEX mixer (tanks upto 5000 litres) -

Tue, 1 Dec 2009 12:51:14 +0000

Lightnin ECL M5 SB 37C - ATEX certified 0.37kW Flameproof top entry tank mixer Designed for efficient mixing of biodiesel process chemicals for tank sizes upto 5000 litres. Maximum SG difference GBP 2950.00 January 30, 2010 ]]>

1.5kW ATEX mixer (5000-10000 litre tanks) -

Tue, 1 Dec 2009 12:51:14 +0000

Lightnin ECL M6 SB 150C - ATEX certified 1.5kW Flameproof top entry tank mixer Designed for efficient mixing of biodiesel process chemicals for tank sizes upto 10000 litres. Maximum SG difference GBP 3965.00 January 30, 2010 ]]>

4kW ATEX mixer (10000-20000 litre tanks) -

Tue, 1 Dec 2009 12:51:14 +0000

Lightnin ECL M6 SB 400C - ATEX certified 4kW Flameproof top entry tank mixer Designed for efficient mixing of biodiesel process chemicals for tank sizes upto 20000 litres. Maximum SG difference GBP 5130.00 January 30, 2010 ]]>

Baynox Plus Solution - 25 litre drum -

Tue, 1 Dec 2009 12:51:14 +0000

Filter Cover Gasket -

Tue, 1 Dec 2009 12:51:14 +0000

Replacement Filter Cover Gasket For Piusi Panther 56 & 72 Part number R1036200A GBP 2.51 January 30, 2010 ]]>

InteliHeat - hazardous area heating jacket for 200 litre drums -

Tue, 1 Dec 2009 12:51:14 +0000

InteliHeat - Ex hazardous area heating jacket for 200 litre drums ATEX and IECEx certified for Zone 1 and Zone 2 Designed for use with steel or plastic drums Completely new and proprietary design. Constructed with custom elastomer and silicone coated glass cloth materials and high density fibreglass insulation. The heating medium uses a patented technology of carbon rich semi-conducting positive temperature coefficient membranes. Safe operating conditions are maintained even in the presence of potentially explosive gases. No transformers are required as it operates using standard AC supply voltages. InteliHeat is ideal for gentle warming and to avoid winter freezing. (For faster heating rates and melting solids at higher temperatures the Thermosafe Induction Heater is recommended.) Specification: Single phase upto 240V, 50/60Hz AC Max power consumption 720W (3A @ 240V) Overall length 1950mm Overall height 850mm Ingress protection rating: IP44 Hazardous area certification: EEx II 2 G Ex e II T3 (T150�C) - Zones 1 and 2� ��Manufactured to EN 60079-0:2004, EN 60079-7:2003 GBP 1849.00 January 30, 2010 ]]>

InteliHeat - hazardous area heating jacket for IBC containers -

Tue, 1 Dec 2009 12:51:14 +0000

InteliHeat - Ex hazardous area heating jacket for IBC containers ATEX and IECEx certified for Zone 1 and Zone 2 Designed for use with plastic liner metal framed IBCs Can also be used to heat 4x205L drums Completely new and proprietary design. Constructed with custom elastomer and silicone coated glass cloth materials and high density fibreglass insulation. The heating medium uses a patented technology of carbon rich semi-conducting positive temperature coefficient membranes. Safe operating conditions are maintained even in the presence of potentially explosive gases. No transformers are required as it operates using standard AC supply voltages. IBC wall temperatures up to 55�C (dependent on operating conditions) Specification: Single phase upto 240V, 50/60Hz AC Max power consumption 2300W (9.5A @ 240V) Overall length 4300mm Overall height 950mm Ingress protection rating: IP44 Hazardous area certification: EEx II 2 G Ex e II T3 (T150�C) - Zones 1 and 2 � ��Manufactured to EN 60079-0:2004, EN 60079-7:2003 GBP 2595.00 January 30, 2010 ]]>

Baynox - pure, crystals - 25Kg bag -

Tue, 1 Dec 2009 12:51:14 +0000

Baynox� Biodiesel Stabilizer is suitable for making biodiesel storage-stable. (Note: Baynox� Solution - liquid form - is also available which contains 20% Baynox crystals ready dissolved in ultra high purity biodiesel to facilitate easy dosing and mixing.) Baynox� is the first choice for biodiesel made from rapeseed oil, palm oil, recycled cooking oils and animal fats. Click here for Baynox (pure) Technical Data Sheet Click here for Baynox (pure) MSDS Baynox� prevents the premature oxidation of unsaturated fatty acid esters in biodiesel and hence the formation of highly volatile compounds and corrosive carboxylic acids as well as preventing the early formation of polymerized and cross-linked biodiesel gums. The recommended use concentration is 400-1000ppm Read Technical Data Sheet and Safety Data Sheet Before use GBP 114.95 January 30, 2010 ]]>

Baynox Plus - pure, powder - 15Kg bag -

Tue, 1 Dec 2009 12:51:14 +0000

Baynox� Plus Biodiesel Stabilizer is suitable for making biodiesel storage-stable. Baynox� Plus is effective for all types of biodiesel. It is recommended especially for more easily perishable types of biodiesel made from oils such as soya, sunflower and Jatropha nut oils. (Note: Baynox� Plus Solution - liquid form - is also available which contains 20% Baynox Plus powder ready dissolved in ultra high purity biodiesel to facilitate easy dosing and mixing.) Click here for Baynox Plus (pure) Technical Data Sheet Click here for Baynox Plus (pure) MSDS Baynox� Plus prevents the premature oxidation of unsaturated fatty acid esters in biodiesel and hence the formation of highly volatile compounds and corrosive carboxylic acids as well as preventing the early formation of polymerized and cross-linked biodiesel gums. The recommended use concentration is 200 - 1000ppm Read Technical Data Sheet and Safety Data Sheet Before use GBP 179.00 January 30, 2010 ]]>