Lightnin ECL M5 SB 37C - ATEX certified 0.37kW Flameproof top entry tank mixer
Pumping capacity - 6m3/min axial downflow (assuming SG 1.2, Viscosity 500cps)
Designed for efficient mixing of biodiesel process chemicals for tank sizes upto 5000 litres. Maximum SG difference <0.25 and Viscosity <1500cps. ATEX certified Ex II 2 G Ex ck IIC Tx . 316 stainless steel wetted parts (subject to client approval).
0.37kW 4-pole electric motor (400V/3ph/50Hz - EExde IIC T4 IP55 Class) Vertical flange mounted
40mm diameter shaft - length upto 1100mm (can be adjusted depending on tank)
Single A310 high efficiency impeller (345mm minimum opening required) sited at shaft end. Off bottom clearance determined according to type of tank
John Crane single mechanical SC/C Seal (Silicon Carbide / Carbon) - dry lubrication
Supplied with either 6 or 8 inch flange
Mounting & Noise Data -
1.32 kN Down load
0.02 kNm Torque
0.87 KNm Bending moment
Noise 70 dB(A)
Cast aluminium gear housing - maximum strength and stiffness
with minimum weight
Speed reduction is achieved using inline concentric planetary gears designed for 24 hour continuous duty - AGMA service
factor of 1.5 or greater
Large output shaft bearings with an average life expectancy in excess of 100,000 hours under continuous full load conditions - longer allowable shaft lengths and ensures a long operating life
Bearings and gears are grease lubricated and sealed for life to ensure maintenance free and trouble free operation
Motor is spigot mounted directly onto the speed reducer to ensure consistent alignment of the high speed coupling. A flexible motor coupling is used to connect the electric motor to the input shaft of the planetary gear in order to dampen out shock torsional loads and increase motor bearing life
All openings are fitted with guards in accordance with current EU Directives
All units in the Lightnin ECL Range carry the CE mark in accordance with European Community Legislation and are ATEX certified where appropriate.
Click here for technical drawing
Note: These mixers can be fitted with 3 gear types (1:1, 5:1 or 6:1) Additionally motor input speed can be varied and changes can be made to the shaft and impellers etc. to accommodate different tank ratios / geometries. Tailored mixers can be provided - generally for the same price - if the customised solution falls within the design parameters... Please include the basic tank size and geometry (i.e. shape, orientation, height & diameter) in the additional information section of your order. If the mixer is not intended for a biodiesel application, please provide the process details as we can almost certainly provide a tailored mixing solution to suit!